The P7 S is Antec’s answer to builders who want serious performance without the noise. Both steel side panels are lined on the inside with high-density sound-dampening foam, absorbing vibration and mechanical noise before it reaches the room. There’s no tempered glass here — and that’s the point. The result is a chassis that sits quietly on or under a desk, running cool and unobtrusive whether it’s in a home office, a content creation workstation, or a professional environment where fan noise during video calls or recordings is simply not acceptable. The brushed silver front panel with dual-side mesh intakes keeps the exterior clean and understated — professional without being boring.

Dual-Mode Top Filter — Your Build, Your Balance

One of the P7 S’s most practical features is its dual-mode removable top filter. In Airflow Mode, a mesh filter sits over the top fan positions, maximising fresh air intake and exhaust. Switch to Silent Mode by replacing it with the included solid cover, reducing noise ingress and output at the top of the case. Both modes are tool-free to swap and easy to remove for cleaning. For builders whose noise requirements vary — say, a workstation that runs intensive renders overnight but sits in a quiet office during the day — this flexibility is genuinely useful without requiring any hardware changes.

Capable Cooling, Generous Clearances

Despite its silent focus, the P7 S doesn’t shortchange thermal performance. Four 120mm PWM fans come pre-installed in a daisy-chain configuration — three at the front and one at the rear — providing immediate, controlled airflow without any additional setup. Fan speed is regulated by your motherboard’s PWM header, keeping noise in check under light loads. Up to nine fans can be installed simultaneously across the front, top, rear, and PSU shroud positions. Radiator support extends to 360mm at the top and 240mm at the front, accommodating most 240mm and 360mm AIO liquid coolers. GPU clearance tops out at 405mm — enough for current RTX 50-series and RX 9000-series cards — while the 175mm CPU cooler clearance handles all mainstream tower air coolers. Front I/O includes dual USB 3.0 plus a USB Type-C 3.2 Gen 2 (10Gbps) port, keeping connectivity current.

No RGB, No Glass: The P7 S is designed for builders who explicitly do not want RGB lighting or a tempered glass window. If a showcase build with visible components is the goal, this is not the right case — consider the Antec AX series instead.

Top Radiator Priority: Radiator support is strongest at the top (up to 360mm). Front radiator support is limited to 240mm maximum, so if a 360mm front-mounted AIO is your cooling plan, this case won’t accommodate it.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 405mm
• CPU Cooler Clearance: Up to 175mm
• Max PSU Length: Up to 270mm (cable included)
• Pre-Installed Fans: 4× 120mm PWM daisy-chain (3 Front, 1 Rear)
• Max Fan Support: Up to 9× simultaneously
• Fan Positions: Front: 3× 120mm / 2× 140mm | Top: 3× 120mm / 2× 140mm | PSU Shroud: 2× 120mm | Rear: 1× 120mm
• Radiator Support: Front: 120 / 140 / 240mm | Top: 120 / 240 / 360mm | Rear: 120mm (≤160mm length)
• Drive Bays: 2× 3.5″/2.5″ convertible, 1× 2.5″ dedicated
• Expansion Slots: 7 (reusable)
• Front I/O: 2× USB 3.0, 1× USB Type-C 3.2 Gen 2 (10Gbps), Headphone/Mic Combo, Power, Reset
• Side Panels: Steel with sound-dampening foam (both sides)
• Top Filter: Dual-mode — Airflow (mesh) or Silent (solid cover), tool-free swap
• Dust Filters: Top and Bottom
• Cable Management: 4× rubber grommets, 3× Velcro straps
• Materials: Steel + Plastic
• Dimensions: 478 × 222 × 465mm (D × W × H)
• Net Weight: 5.75kg
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The CC560 MESH V2 steps up from the standard CC560 V2 with an upgraded fine mesh front panel that opens up intake airflow significantly over the original slotted design. The mesh allows cool air to pass freely into the chassis across all three front-mounted fans, keeping intake resistance low and temperatures in check. A large mesh top panel reinforces the ventilation strategy, ensuring warm air has multiple exit paths. A magnetic top dust filter handles maintenance without tools — lift, tap, replace. It’s a chassis that takes airflow seriously from every angle without requiring any configuration effort from the builder.

Four ARGB Fans, PSU Shroud Support, One Button Control

Four 120mm ARGB fans come pre-installed straight out of the box — three at the front for intake and one at the rear for exhaust — covering the primary airflow positions from the first boot. The fans are PWM-capable for speed control and ARGB-enabled for motherboard lighting sync. An LED control button on the front I/O lets you cycle through preset lighting effects independently if your motherboard doesn’t have an ARGB header. A standout V2 upgrade over the original CC560 is PSU shroud fan support — two additional 120mm fans can be mounted on the shroud to push fresh air directly across a power-hungry GPU, a meaningful thermal benefit for higher-wattage builds. Total fan support tops out at 8× 120mm or 5× 140mm simultaneously.

Broad Compatibility and Practical Storage

The CC560 MESH V2 comfortably accommodates the full spectrum of mainstream build configurations. E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards all fit, and GPU clearance extends to 370mm — enough headroom for most current-generation cards including high-end AIB models. CPU tower coolers up to 165mm tall are supported, and PSUs up to 170mm in length fit without HDD tray removal. Storage is handled with two 3.5″ HDD bays (one of which can be converted to a 2.5″ SSD bay) and two dedicated 2.5″ SSD mounting positions on the motherboard backplate. Cable management clearance sits at 20mm behind the tray — tight but functional, and the reinforced chassis and glass panel give the build a more premium feel than the price suggests.

Front I/O Note: The CC560 MESH V2 provides one USB 3.0 and one USB 2.0 port on the front panel. If your workflow relies on multiple front USB 3.0 connections simultaneously, factor this in against higher-tier options.

GPU Clearance Note: With the 370mm GPU length limit, the vast majority of current-gen cards fit comfortably. If you’re running a particularly long flagship card, verify the exact length of your specific AIB model before building.

Key Highlights

• Form Factor: Mid Tower (E-ATX / ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 370mm
• CPU Cooler Clearance: Up to 165mm
• Max PSU Length: Up to 170mm
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm or 5× 140mm simultaneously
• PSU Shroud Fan Support: 2× 120mm (additional)
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Top: 120 / 140 / 240mm | Rear: 120mm
• Drive Bays: 2× 3.5″ HDD (1 convertible to 2.5″), 2× 2.5″ SSD (backplate mounted)
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 1× USB 2.0, HD Audio Combo Jack, LED Control
• Side Panel: Reinforced Tempered Glass
• Top Dust Filter: Magnetic, tool-free
• Cable Management: 20mm rear clearance
• Dimensions: 432 × 215 × 483mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The GX760A Fortune is built around what HuntKey calls the “Sea-View” concept: a seamless 270° tempered glass enclosure that wraps the front and side of the chassis, giving an unobstructed, panoramic view of your components and RGB lighting from virtually any angle. Unlike traditional cases where a mesh or solid front panel dominates the visual, the Fortune’s glass-forward design puts your build — fans, cooler, cables, and all — on full display. The snap-fit quick-release panels make accessing the interior straightforward without tool faff, and the white exterior finish gives the case a clean, premium aesthetic that pairs well with white or light-themed component builds.

Top 360mm Liquid Cooler and Up to 10 Fan Positions

With no mesh front panel to work with, the GX760A’s cooling strategy centres on the top — which supports a full 360mm radiator, accommodating triple 120mm AIO setups without compromise. Up to 10 fans can be installed simultaneously across four zones: three at the top, three on the side, three inside, and one at the rear. This gives builders substantial flexibility to construct positive pressure, negative pressure, or balanced airflow configurations depending on their thermal requirements. The case is sold with fans included in certain bundles (such as the 4-fan white kit), so confirm what’s included in your specific purchase before adding additional fans.

Generous Hardware Clearances, Honest Storage Limits

The GX760A handles large hardware comfortably — GPUs up to 400mm in length fit without issue, and CPU tower coolers up to 160mm tall are supported. Seven PCIe expansion slots cover multi-card and high-end single-GPU configurations. On storage, it’s worth noting the GX760A keeps things lean: one 3.5″ HDD bay and one 2.5″ SSD bay are provided. This is a build focused on the visual experience and cooling headroom rather than mass storage capacity — builders planning heavy drive arrays should factor this in, or plan to house additional drives externally.

Radiator Placement Note: The GX760A supports liquid cooling radiators at the top only — there is no front radiator mount, as the front panel is tempered glass. If your preferred AIO radiator is front-mounted, this case is not compatible with that configuration.

Storage Note: The GX760A provides only one 3.5″ HDD bay and one 2.5″ SSD bay. Builders with multiple drives will need external storage solutions or an NAS to supplement.

Front I/O Note: Front connectivity is one USB 3.0 and one USB 2.0 port. If you need dual USB 3.0 front access, note this limitation before purchasing.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 400mm
• CPU Cooler Clearance: Up to 160mm
• Max Fan Support: Up to 10× 120mm (Top: 3, Side: 3, Inside: 3, Rear: 1)
• Radiator Support: Top: up to 360mm (3×120mm) only
• Drive Bays: 1× 3.5″ HDD, 1× 2.5″ SSD
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 1× USB 2.0, HD Audio
• Side/Front Panels: Dual Tempered Glass (270° full-view)
• Panel Access: Snap-fit quick-release, tool-free
• Materials: 0.6mm SPCC Steel
• Dimensions: 424 × 215 × 465mm (L × W × H)
• PSU: Not included (standard ATX)
• Colour: White

Proudly sold by the Ringwood Digital Store.

The SPEC-03’s interior layout is built with a clear priority: getting cool air across your graphics card. The two pre-installed 120mm orange LED front intake fans are positioned to pull air directly into the GPU zone, keeping temperatures in check during extended gaming sessions. The front panel is removable for cleaning access, and a dust filter behind it keeps debris out of the intake path. The design language is characteristically Corsair Carbide — bold contours, matte black finish, and a prominent front grille that communicates purpose without being garish.

Windowed Side Panel and Orange LED Lighting

The large side panel window gives a full view of the interior, letting you showcase your components and the warm orange glow of the two front fans. Unlike tempered glass panels found on newer cases, the SPEC-03 uses a plastic window — lighter and more impact-resistant, though less scratch-proof over time. The orange LED fans provide consistent fixed-colour ambient lighting without any software, headers, or hubs required. It’s a simple, reliable lighting setup that suits builders who want colour without the complexity of ARGB systems.Generous

Clearances and Practical Storage

Despite its age, the SPEC-03 holds up well on hardware clearances. GPUs up to 426mm fit comfortably — enough headroom for virtually any current-generation card. CPU coolers up to the case’s height limits are well accommodated, and the six fan mounting positions (2× front 140/120mm, 2× top 120mm, 1× rear 120mm, 1× bottom 120mm) leave plenty of room to expand cooling capacity. Storage is a strong point: three 3.5″ hard drive bays, two 2.5″ SSD bays, and two 5.25″ optical drive bays cover both modern and legacy storage needs. All drive installation is tool-free. Cable routing cutouts and a CPU cooler backplate cutout round out the builder-friendly interior.

Lighting Note: The orange LED fans use fixed-colour, non-addressable LEDs — they are not ARGB or RGB-sync compatible. There is no lighting control button; the fans run lit whenever the system is powered on. Replacement orange LED fans can be difficult to source, so factor this in if a fan ever needs replacing.

Side Panel Note: The side window is a plastic panel, not tempered glass. Handle with care during builds and cleaning to avoid scratching the window surface.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 426mm
• Pre-Installed Fans: 2× 120mm Orange LED (Front), 1× 120mm Plain (Rear)
• Max Fan Support: Up to 6× total (2× front 140/120mm, 2× top 120mm, 1× rear 120mm, 1× bottom 120mm)
• Radiator Support: Rear: 120mm
• Drive Bays: 3× 3.5″ HDD, 2× 2.5″ SSD, 2× 5.25″ Optical
• Expansion Slots: 7
• Front I/O: 2× USB 3.0, Headphone/Mic, Power, Reset
• Side Panel: Plastic Window
• Dust Filters: Front and PSU intake
• CPU Cooler Backplate Cutout: Yes
• Tool-Free Drive Installation: Yes
• Materials: Steel
• Dimensions: 220 × 430 × 500mm (W × H × D)
• Weight: 5kg
• PSU: Not included (standard ATX)
• Colour: Black with Orange LED accents

Proudly sold by the Ringwood Digital Store.

The NX292 ARGB keeps things functional with a mesh front panel designed to allow steady intake airflow across the three front-mounted fans. Unlike premium cases with sculpted or geometric mesh patterns, the NX292’s front is clean and understated — well suited to a build that prioritises performance over visual drama. Top and bottom dust filters are included as standard, managing dust ingress without requiring tool-free magnetic setups. It’s a no-nonsense airflow design that covers the bases cleanly.

Four ARGB Fans, Pre-Installed and Ready

The ARGB variant of the NX292 ships with four 120mm ARGB fans pre-installed — three handling front intake and one at the rear for exhaust — giving the build solid thermal coverage from the first power-on. An LED control button on the front I/O panel lets you toggle lighting effects without any software dependency. The chassis supports up to eight fans simultaneously, with additional mounting positions available at the top and PSU shroud for builders who want to push cooling further down the line.

Hardware Compatibility and Build Essentials

The NX292 ARGB supports a wider motherboard range than most cases in its class, accommodating E-ATX, ATX, Micro-ATX, and Mini-ITX boards. Front radiator support goes up to 360mm, making it compatible with standard 240mm and 360mm AIO coolers despite its budget positioning. Storage is handled with two 3.5″/2.5″ combo bays and two dedicated 2.5″ SSD bays across seven expansion slots. PSU length maxes out at 165mm with the HDD tray in place — a tighter limit than pricier mid-towers — but extends to 300mm once the tray is removed.

GPU Length Note: Maximum GPU clearance is 320mm. Most mainstream and mid-range cards fall within this limit, but verify your card’s length before building — some higher-end triple-slot models exceed this figure and will not fit without modification.

PSU Length Note: With the HDD tray installed, PSU length is capped at 165mm. Longer PSUs require removing the HDD tray entirely. Check your PSU dimensions against this limit before committing to a build configuration.

Front I/O Note: The NX292 ARGB provides one USB 3.0 port and two USB 2.0 ports on the front panel. If your workflow relies on multiple front USB 3.0 connections, factor this in when comparing to higher-tier options.

Key Highlights

• Form Factor: Mid Tower (E-ATX / ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 320mm
• CPU Cooler Clearance: Up to 155mm
• Max PSU Length: Up to 165mm (with HDD tray) / Up to 300mm (without)
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× simultaneously
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Rear: 120mm (≤156mm length)
• Drive Bays: 2× 3.5″/2.5″ combo (1 convertible), 2× 2.5″ dedicated
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 2× USB 2.0, Headphone/Mic Combo Jack, LED Control, Reset
• Side Panel: Tempered Glass
• Dust Filters: Top and Bottom
• Materials: Steel + Plastic
• Dimensions: 406 × 206 × 450mm (D × W × H)
• Net Weight: 4.5kg
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The AX85 sets itself apart with a ripple-patterned mesh front panel that goes beyond purely functional airflow design — the wave motif gives it a distinctive look without the bulk of a solid or glass front. Functionally, the large-area mesh allows cool air to pass into the chassis freely, feeding the three front-mounted intake fans without restriction. Dual dust filters — a magnetic unit on top and a flat filter at the bottom — make maintenance straightforward without tools, keeping intake quality high over time. It’s a front panel that holds its own aesthetically while never compromising on what matters.

Four ARGB Fans, Daisy-Chain Ready

Four 120mm ARGB fans come pre-installed out of the box — three at the front handling intake and one at the rear for exhaust — covering the primary airflow positions immediately. The front fans support daisy-chain synchronisation, letting you link them together via the lead fan and keep the ARGB cabling manageable. An onboard LED control button on the front I/O panel lets you cycle through lighting effects or switch them off without needing software. The chassis supports up to eight 120mm fans simultaneously, leaving space to add top or PSU shroud fans as the build demands.

Generous Hardware Clearances and Cooling Flexibility

The AX85 is built to accommodate serious hardware. GPUs up to 340mm fit comfortably with all front fans installed; remove the front fan bracket and that ceiling rises to 370mm, opening the door to high-end triple-slot cards. CPU tower coolers up to 160mm tall are supported, and the front panel takes radiators up to 360mm — making 240mm and 360mm AIO liquid coolers a straightforward fit. Storage is well covered with two 3.5″/2.5″ combo bays and two dedicated 2.5″ SSD bays. Cable management sits at 23mm behind the motherboard tray — tight but workable for a neat finish.

GPU Length Note: The 370mm GPU clearance figure applies only with the front fan bracket removed. With all three front fans installed, maximum GPU length is 340mm. Measure your card before building — most current-gen cards fall well within the 340mm limit, but flagship models can push longer.

PSU Length Note: Check the official Antec spec sheet for your specific PSU length limit with the HDD tray in place, as longer PSUs may require repositioning or removing the tray for a proper fit.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 340mm (with front fans) / Up to 370mm (without front fans)
• CPU Cooler Clearance: Up to 160mm
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Top: 120 / 240mm | Rear: 120mm
• Drive Bays: 2× 3.5″/2.5″ combo, 2× 2.5″ dedicated
• Expansion Slots: 7
• Front I/O: 2× USB 3.0, Headphone/Mic Combo Jack, LED Control Button
• Side Panel: 4mm Tempered Glass
• Dust Filters: Magnetic (top), flat filter (bottom)
• Cable Management: 23mm rear clearance
• Materials: Steel + Plastic
• Dimensions: 393 × 205 × 485mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The FORGE 120A’s front panel earns MSI’s “Mesh Certified” designation, meaning it’s designed from the ground up to maximise unobstructed intake airflow rather than prioritising aesthetics. With three 120mm fans already installed behind it from the factory, cool air is pulled into the chassis the moment the system powers on. The mid-tower footprint keeps the build compact without sacrificing interior volume, and the overall design philosophy puts sustained thermal performance ahead of visual flair — making it a solid choice for gaming builds where component longevity matters.

Six Auto-RGB Fans, Integrated Hub, One Button

Six Auto-RGB fans come pre-installed across three positions — three at the front, two on top, and one at the rear — covering every major airflow axis immediately. Unlike traditional ARGB setups that require per-fan header connections, the FORGE 120A uses an onboard LED hub that consolidates lighting control. A single button on the front I/O panel cycles through lighting effects or cuts the LEDs entirely, with no software required. The hub supports up to 10 MSI devices or 6 non-MSI devices, giving you room to expand if you add fans or lighting strips later. MSI Mystic Light Sync is also supported for motherboard-level RGB synchronisation.

Hardware Clearances and Drive Support

Despite its mid-tower dimensions, the FORGE 120A is generous where it counts. GPUs up to 330mm fit without modification — enough to accommodate most current-generation cards including the RTX 40-series and RX 7000-series. CPU cooler height clearance tops out at 160mm, covering the majority of high-performance tower air coolers. AIO liquid cooling is supported up to 240mm at the front and top. Drive storage covers three 2.5″ bays and two combination 2.5″/3.5″ bays, handling most SSD-first builds with room for a mechanical drive. Seven expansion slots round out the rear.

PSU Length Note: Maximum PSU length is 200mm with the HDD tray installed. If your PSU is on the longer side, remove the 3.5″ HDD tray to open up the full PSU cavity. Verify your PSU dimensions before building.

Fan Hub Note: The onboard control board uses a proprietary fan header — it is not compatible with standard ARGB or RGB fans. Aftermarket ARGB fans should connect directly to your motherboard’s ARGB header rather than through the hub.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 330mm
• CPU Cooler Clearance: Up to 160mm
• Max PSU Length: Up to 200mm (with HDD tray) / more without
• Pre-Installed Fans: 6× Auto-RGB (3 Front, 2 Top, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Radiator Support: Front: 120 / 140 / 240mm | Top: 120 / 240mm | Rear: 120mm
• Drive Bays: 3× 2.5″, 2× 2.5″/3.5″ combo
• Expansion Slots: 7
• Front I/O: 2× USB 3.2 Gen 1 Type-A, 1× Audio Out, 1× Mic In, LED On/Off, Reset
• Side Panel: 4mm Tempered Glass
• Top Dust Filter: Magnetic, tool-free removal
• Dimensions: 411.6 × 210 × 498mm (D × W × H)
• Net Weight: 6kg
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The AX27 RGB Elite leads with one of its strongest attributes: a full-mesh front panel purpose-built for unrestricted airflow. Where solid or glass fronts create a bottleneck for intake, the AX27’s mesh design allows cool air to flow directly into the chassis with minimal resistance — feeding the three front-mounted fans and keeping temperatures stable under sustained gaming loads. This makes it a particularly strong pick for builders running warmer components who don’t want to compromise on airflow in exchange for aesthetics.

Four Pre-Installed RGB Fans — Lighting Without the Controller Tax

The AX27 ships ready to run with four pre-installed 120mm fixed RGB fans — three at the front and one at the rear — covering the most impactful airflow positions from the moment your build is complete. The fans deliver vivid colour lighting without requiring an external RGB controller or software configuration, keeping the initial setup straightforward. The case supports up to eight 120mm fans simultaneously, offering significant headroom for builders who want to expand their cooling setup over time, including front, top, rear, and bottom mounting positions.

Half-View Tempered Glass Side Panel — Style Where It Counts

Rather than a full-side glass panel, the AX27 RGB Elite features a half-view tempered glass side panel that frames the interior without fully exposing it. This design choice gives the case a more structured, purposeful aesthetic — putting your components and RGB fans on display while maintaining a solid upper section that contributes to the overall chassis rigidity. It’s a practical middle ground between a fully enclosed steel side and a full panoramic glass design.

Important Note: The pre-installed fans are fixed-colour RGB (FRGB) — not addressable ARGB. This means they emit a fixed colour and cannot be individually controlled or software-synced via motherboard ARGB headers. Lighting can be toggled using the front I/O LED button, but colour customisation per fan is not supported. If full ARGB control is a priority for your build, consider pairing with aftermarket ARGB fans.

Buyer Tip: GPU clearance drops to 295mm with front fans installed and 270mm with the rear fan in place. If you’re planning to run a longer graphics card (300mm+), check your GPU dimensions carefully before building — particularly if you intend to keep all fans mounted as shipped.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 295mm (with front fans) / 270mm (with rear fan)
• CPU Cooler Clearance: Up to 160mm
• Pre-Installed Fans: 4× 120mm Fixed RGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Fan Support: Front: 3× 120mm / 2× 140mm | Top: 2× 120mm | Rear: 1× 120mm | Bottom: 2× 120mm
• Radiator Support: Front: 120 / 240 / 280mm | Rear: 120mm
• Drive Bays: 2× 3.5″, 1× 2.5″ (combo) + 2× 2.5″ dedicated
• Expansion Slots: 7
• Side Panel: Half-View Tempered Glass
• Front I/O: 1× USB 3.0, 2× USB 2.0, HD Audio/Mic, LED On/Off Button
• Material: Steel + Plastic
• Dimensions: 345 × 207 × 451mm (D × W × H)
• Colour: Black
• PSU: Not included (standard ATX)

Proudly sold by the Ringwood Digital Store.

The BU560 is a practical full-size ATX Mid Tower that doesn’t cut corners on hardware headroom. With GPU clearance up to 350mm and CPU cooler support up to 165mm, it accommodates most mainstream and enthusiast-tier components without compatibility concerns. Seven PCIe expansion slots provide ample room for add-in cards alongside a dedicated graphics card, and a single 5.25″ optical bay is retained for builders who still need disc access. ATX, Micro-ATX, and Mini-ITX motherboards are all supported, making the BU560 a flexible chassis across different build configurations.

Blackened SPCC Steel Construction — Built to Last

The BU560 is constructed from 0.6mm SPCC steel with a blackened finish — a step up in panel thickness from some comparable budget cases. This added rigidity reduces flex during transport and assembly, and gives the chassis a more substantial feel overall. The clean, understated aesthetic with its solid steel panels suits home and office environments where a subtle profile is preferred over RGB lighting or tempered glass windows.

Multi-Position Fan Support for Expandable Airflow

While the BU560 ships without fans installed, it supports up to five 120mm fans across three mounting positions — three at the front, one at the rear, and one on the left side panel. This gives builders the flexibility to dial in their airflow configuration based on their components and thermal requirements, whether that’s a simple single-exhaust setup or a more comprehensive push-pull intake arrangement. The bottom-mount PSU placement also helps keep airflow separation between the power supply and the main chamber.

Buyer Tip: The BU560 ships with no fans included. At minimum, a 120mm rear exhaust fan is strongly recommended for adequate airflow. Budget for at least one or two fans alongside this case if you’re building a new system.

Note: Front I/O USB speeds vary by unit — some listings indicate USB 2.0 ports while others list USB 1.1. Verify with us before purchase if front-panel USB speed is important to your use case. No PSU is included; a standard ATX power supply is required separately.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 350mm
• CPU Cooler Clearance: Up to 165mm
• Drive Bays: 2× 5.25″, 2× 3.5″ HDD, 2× 2.5″ SSD (vertically mounted)
• Expansion Slots: 7
• Fan Support: Front: 3× 120mm | Rear: 1× 120mm | Side: 1× 120mm (none included)
• Front I/O: 1× USB 3.0, 2× USB 2.0, HD Audio
• Material: 0.6mm SPCC Blackened Steel
• PSU Mount: Bottom
• Dimensions: 440 × 205 × 435mm
• Colour: Black
• PSU: Not included (standard ATX)

Proudly sold by the Ringwood Digital Store.

The AX61’s front panel leads with purpose — a bold geometric mesh design that’s as functional as it is distinctive. Unlike solid or tempered glass fronts that restrict airflow, the high-density mesh allows cool air to flow freely into the chassis, feeding the pre-installed fans and keeping intake temperatures low. Combined with bottom air intakes, the AX61 establishes strong all-round airflow paths that support sustained performance during demanding gaming sessions. It’s a front panel that looks the part without compromising what matters most.

Four Pre-Installed ARGB Fans with Daisy-Chain Sync

Out of the box, the AX61 comes with four 120mm ARGB fans — three mounted at the front and one at the rear — covering the most critical airflow positions immediately. All four fans support ARGB lighting synchronisation with your motherboard, and the daisy-chain design allows you to link the front fans together via the main fan, keeping cable runs clean. The case supports up to eight 120mm fans simultaneously, leaving room to expand cooling capacity as your build grows.

Serious Radiator and Hardware Clearance

Despite sitting in the accessible end of the market, the AX61 doesn’t shortchange you on cooling potential. The front panel supports radiators up to 360mm, making it compatible with most 240mm and 360mm AIO liquid coolers for builders who want to go beyond air cooling. CPU coolers up to 160mm tall are supported, covering the majority of high-end tower air coolers, while GPUs up to 320mm in length fit without issue. Cable management is addressed with 24mm of clearance on the left side and 13mm on the right, keeping the interior tidy once the build is complete.

Buyer Tip: The HDD cage can interfere with longer PSUs (160mm or more in cable length). If your power supply is on the longer side, the HDD cage may need to be repositioned toward the front of the case or removed entirely to ensure a proper fit. Check your PSU dimensions before building.

Note: The ARGB fans are SATA-powered and connect to the motherboard via a SATA cable for lighting control. Ensure your motherboard has an available SATA port and ARGB header, or use the onboard LED control button on the front I/O panel to cycle lighting effects independently.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 320mm
• CPU Cooler Clearance: Up to 160mm
• Max PSU Length: Up to 165mm (with HDD cage) / 345mm (without)
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Radiator Support: Front: 120 / 240 / 360mm | Top: 120 / 240mm
• Drive Bays: 2× 3.5″, 2× 2.5″
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 2× USB 2.0, HD Audio/Mic, LED Control
• Side Panel: Tempered Glass
• Dimensions: 405 × 200 × 449mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.