The ASUS Prime GeForce RTX 5060 OC is the better-cooled, higher-clocked sibling to the Dual RTX 5060 OC, upgrading from a dual-fan to a triple Axial-tech fan configuration across a longer 268.3 mm PCB while maintaining the same 2.5-slot thermal footprint. The three fans use ASUS’s barrier ring Axial-tech design for increased downward air pressure and airflow uniformity across the full heatsink surface — enabling the higher 2595 MHz OC mode boost clock with sustained thermal stability. At 30 MHz above the Dual OC’s boost in OC mode, the Prime OC sits at the top of ASUS’s standard RTX 5060 clock speed range ahead of any manual tuning.

ASUS Prime series components — Super Alloy Power II premium alloy chokes, solid polymer capacitors, high-current power stages — and the Auto-Extreme fully automated manufacturing process contribute to power delivery stability and long-term reliability that makes this card well-suited to builds that run long, demanding gaming sessions or content creation workloads. ASUS GPU Tweak III with MuseTree provides real-time monitoring, performance tuning, and AI-enhanced performance management, while the GeForce Game Ready Driver and NVIDIA Studio Driver ensure compatibility across both gaming and creative professional workflows.

The RTX 5060 uses a PCIe 5.0 x8 electrical interface. On PCIe 5.0 and PCIe 4.0 platforms this has no meaningful gaming performance impact. On PCIe 3.0 platforms the effective bandwidth is equivalent to PCIe 3.0 x4 — verify compatibility for legacy platform builds.

The card is 268.3 mm long — longer than the Dual RTX 5060 OC (228 mm) and some compact Mini-ITX or SFF cases may have clearance constraints. Verify your case’s maximum GPU length specification before ordering.

The 128-bit bus and 8 GB GDDR7 frame buffer are well-matched to 1080p high/ultra and 1440p with DLSS. At native 1440p or 4K maximum quality without DLSS, bandwidth and VRAM will constrain performance in the most demanding titles — DLSS 4 Quality or Balanced mode is the recommended approach for those resolutions.

DLSS 4 Multi Frame Generation is the RTX 5060 generation’s headline advantage over RTX 30 and RTX 40 series at comparable price points. In supported titles, DLSS 4 can generate up to three additional frames per rendered frame — delivering significantly higher effective frame rates than the GPU’s raw rasterisation throughput suggests.

Technical Specifications

The RTX 5060 uses NVIDIA’s GB206 Blackwell GPU with 3840 CUDA cores and 614 AI TOPs from 5th-generation Tensor cores. The 8 GB GDDR7 frame buffer runs at 28 Gbps on a 128-bit bus. The Prime OC’s clocks are 2595 MHz boost in OC mode and 2565 MHz in default mode — 30 MHz higher than the Dual OC in both modes. Outputs are 3× DisplayPort 2.1b and 1× HDMI 2.1b with HDCP 2.3, supporting up to four simultaneous displays at up to 7680×4320@60Hz. A single 8-pin PCIe power connector is required with a 550W system PSU recommended.

Key Highlights

• NVIDIA GeForce RTX 5060 — Blackwell architecture (GB206), TSMC 4nm
• 3840 CUDA cores
• 5th-gen Tensor cores — 614 AI TOPs
• 4th-gen RT cores — hardware ray tracing
• 8 GB GDDR7, 128-bit bus, 28 Gbps, ~448 GB/s bandwidth
• OC mode: 2595 MHz boost / Default mode: 2565 MHz boost
• Highest factory clock speed in the ASUS RTX 5060 Dual/Prime lineup
• ~145W TDP — 1× 8-pin PCIe power connector
• 550W system PSU recommended
• PCIe 5.0 x8 (note: 8 lanes, not x16)
• 3× DisplayPort 2.1b + 1× HDMI 2.1b, HDCP 2.3
• Up to 4 simultaneous displays, max resolution 7680×4320
• 2.5-slot design — 268.3 × 120 × 50 mm (longer than Dual variant)
• Triple Axial-tech fans — barrier ring design for increased airflow pressure
• ASUS Super Alloy Power II — premium alloy chokes, solid polymer capacitors
• ASUS Auto-Extreme automated manufacturing
• DLSS 4 with Multi Frame Generation — up to 3 AI-generated frames per rendered frame
• NVIDIA Reflex 2, Ansel, ShadowPlay, Broadcast
• NVIDIA G-SYNC Compatible
• Real-time ray tracing with RTX
• VR Ready
• DirectX 12 Ultimate, OpenGL 4.6, Vulkan
• ASUS GPU Tweak III + MuseTree AI performance management
• GeForce Game Ready Driver + NVIDIA Studio Driver compatible

Proudly sold by the Ringwood Digital Store.

The ASUS Dual GeForce RTX 5060 OC brings NVIDIA’s Blackwell architecture to a 2.5-slot dual-fan platform sized for broad chassis compatibility, including smaller mid-towers and mini-ITX cases that couldn’t accommodate larger cards. The compact 228 × 123 × 50 mm footprint uses ASUS’s Axial-tech fan design with longer blades and barrier rings for strong airflow despite the card’s slim profile, and 0dB technology stops the fans entirely during light workloads for silent desktop and media use. Dual ball bearing fans last significantly longer than sleeve bearing designs under sustained gaming loads.

The headline feature of the RTX 5060’s Blackwell generation is DLSS 4 with Multi Frame Generation — NVIDIA’s latest AI-powered frame rate booster which can generate up to three additional frames for each rendered frame, dramatically increasing effective frame rates in supported titles. Combined with Blackwell’s 5th-generation Tensor cores at 614 AI TOPs, this card punches well above what its raw rasterisation spec suggests in DLSS 4-supported games. The dual BIOS switch lets builders toggle between Quiet and Performance BIOS profiles without software, and ASUS GPU Tweak III with MuseTree provides monitoring, tuning, and AI-enhanced performance management.

The RTX 5060 uses a PCIe 5.0 x8 electrical interface (8 lanes). On PCIe 5.0 and PCIe 4.0 platforms this has no meaningful real-world gaming performance impact. On older PCIe 3.0 platforms the effective bandwidth is equivalent to PCIe 3.0 x4 — verify motherboard compatibility for legacy platform builds.

The 128-bit memory bus and 8 GB GDDR7 frame buffer are well-suited to 1080p high and 1440p with DLSS. At native 1440p or 4K maximum quality settings without DLSS, bandwidth and VRAM constraints will be a factor in demanding titles — DLSS 4 Quality or Balanced mode is the recommended approach for those resolutions.

DLSS 4 Multi Frame Generation is the most significant upgrade over RTX 40 and RTX 30 series cards at equivalent price points. In supported titles with DLSS 4 enabled, effective frame rates can more than double compared to native rendering — making this card highly competitive despite its 128-bit bus.

Technical Specifications

The RTX 5060 uses NVIDIA’s GB206 Blackwell GPU with 3840 CUDA cores and 614 AI TOPs from 5th-generation Tensor cores. The 8 GB GDDR7 frame buffer runs at 28 Gbps on a 128-bit bus. Clocks are 2565 MHz boost in OC mode and 2535 MHz in default mode. Outputs are 3× DisplayPort 2.1b and 1× HDMI 2.1b with HDCP 2.3, supporting up to four simultaneous displays at up to 7680×4320@60Hz. The card connects via PCIe 5.0 x8. Based on the RTX 5060’s 145W TDP and ASUS’s Dual series power recommendations, a single 8-pin PCIe power connector and a 550W system PSU are the expected requirements.

Key Highlights

• NVIDIA GeForce RTX 5060 — Blackwell architecture (GB206), TSMC 4nm
• 3840 CUDA cores
• 5th-gen Tensor cores — 614 AI TOPs
• 4th-gen RT cores — hardware ray tracing
• 8 GB GDDR7, 128-bit bus, 28 Gbps, ~448 GB/s bandwidth
• OC mode: 2565 MHz boost / Default mode: 2535 MHz boost
• Factory overclocked — dual BIOS (Quiet / Performance)
• ~145W TDP — 1× 8-pin PCIe power connector
• 550W system PSU recommended
• PCIe 5.0 x8 (note: 8 lanes, not x16)
• 3× DisplayPort 2.1b + 1× HDMI 2.1b, HDCP 2.3
• Up to 4 simultaneous displays, max resolution 7680×4320
• 2.5-slot design — 228 × 123 × 50 mm (SFF-compatible)
• Dual Axial-tech fans — barrier ring design, dual ball bearings
• 0dB Technology — fans stop at low temperatures
• DLSS 4 with Multi Frame Generation — up to 3 AI-generated frames per rendered frame
• NVIDIA Reflex 2, Ansel, ShadowPlay, Broadcast
• NVIDIA G-SYNC Compatible
• Real-time ray tracing with RTX
• VR Ready
• DirectX 12 Ultimate, OpenGL 4.6, Vulkan
• ASUS GPU Tweak III + MuseTree AI performance management

Proudly sold by the Ringwood Digital Store.

The GIGABYTE GeForce RTX 5060 AERO OC is positioned at the intersection of gaming performance and content creation capability, using Gigabyte’s AERO sub-brand — white PCB, white shroud, white heatsink — to target builders who want a clean all-white system without compromising on cooling quality or clock headroom. The WINDFORCE triple-fan system on the AERO OC is a step above typical RTX 5060 coolers: Hawk fans with alternate spinning on the outer two fans reduce turbulence at adjacent airflow boundaries, a copper plate and composite copper heat pipes maximise thermal transfer from the GPU die, server-grade thermal conductive gel (rather than standard pads) ensures consistent long-term contact between GPU and heat spreader, 3D active fan positioning improves blade-to-heatsink airflow alignment, and screen cooling channels air more precisely between fin stacks. The result is a GPU that runs cooler and quieter than its 145W power envelope demands, leaving headroom for the 2595 MHz factory OC — 98 MHz above the 2497 MHz reference specification — to operate stably under sustained load.

The Dual BIOS switch lets builders toggle between Performance and Silent profiles without software, and RGB lighting on the shroud integrates with Gigabyte’s RGB Fusion 2.0 ecosystem. A reinforced card structure resists PCB flex from the card’s own weight in horizontal and vertical mount installations.

The RTX 5060 uses a PCIe 5.0 x8 electrical interface. On PCIe 5.0 and PCIe 4.0 platforms this has no meaningful real-world gaming or creative performance impact. On PCIe 3.0 platforms the effective bandwidth is equivalent to PCIe 3.0 x4 — verify compatibility for legacy platform builds.

The 128-bit bus and 8 GB GDDR7 frame buffer are well-suited to 1080p high/ultra and 1440p with DLSS. For native 4K or maximum quality 1440p without DLSS in bandwidth-intensive titles, DLSS 4 Quality or Balanced mode is the recommended approach.

DLSS 4 Multi Frame Generation is the headline advantage of the Blackwell generation. In supported titles, the Tensor cores can generate up to three additional AI frames per rendered frame — dramatically increasing effective frame rates beyond what 3840 CUDA cores would suggest at native resolution. For content creators, the RTX 5060’s 5th-generation NVENC encoder supports AV1, H.264, H.265, and the new AV1 Ultra High Quality mode for faster, higher-quality export in supported applications.

Technical Specifications

The RTX 5060 uses NVIDIA’s GB206 Blackwell GPU (4nm) with 3840 CUDA cores, 30 RT cores, 120 Tensor cores, and 614 AI TOPs. The 8 GB GDDR7 frame buffer runs at 28 Gbps on a 128-bit bus with ~448 GB/s bandwidth. Factory boost clock is 2595 MHz (vs 2497 MHz reference). Outputs are 3× DisplayPort 2.1b and 1× HDMI 2.1b with HDCP 2.3, supporting up to four simultaneous displays at 7680×4320. A single 8-pin PCIe power connector is required with a 550W system PSU recommended.

Key Highlights

• NVIDIA GeForce RTX 5060 — Blackwell architecture (GB206), TSMC 4nm
• 3840 CUDA cores, 30 RT cores, 120 Tensor cores
• 5th-gen Tensor cores — 614 AI TOPs
• 8 GB GDDR7, 128-bit bus, 28 Gbps, ~448 GB/s bandwidth
• 2595 MHz boost (factory OC — 98 MHz above reference 2497 MHz)
• ~145W TDP — 1× 8-pin PCIe power connector
• 550W system PSU recommended
• PCIe 5.0 x8 (note: 8 lanes, not x16)
• 3× DisplayPort 2.1b + 1× HDMI 2.1b, HDCP 2.3
• Up to 4 simultaneous displays, max resolution 7680×4320
• All-white PCB and shroud — AERO creator/gaming aesthetic
• WINDFORCE triple Hawk fan cooler — alternate outer fan spinning
• Server-grade thermal conductive gel (not standard thermal pads)
• Composite copper heat pipes + copper plate
• 3D active fan positioning + screen cooling
• Dual BIOS (Performance / Silent) — hardware switch
• RGB Fusion 2.0 compatible RGB lighting
• Reinforced card structure
• DLSS 4 with Multi Frame Generation
• NVIDIA Reflex 2, Ansel, ShadowPlay, Broadcast
• 5th-gen NVENC — AV1 / H.264 / H.265 encode + AV1 Ultra
• High Quality mode
• NVIDIA G-SYNC Compatible
• Real-time ray tracing with RTX
• VR Ready
• DirectX 12 Ultimate, OpenGL 4.6, Vulkan

Proudly sold by the Ringwood Digital Store.

The Gigabyte GeForce RTX 5060 Gaming OC brings NVIDIA’s Blackwell architecture to a gaming-focused platform with a triple WINDFORCE fan cooler and a meaningful 98 MHz factory overclock over the reference 2497 MHz specification. Positioned just below the AERO OC in Gigabyte’s RTX 5060 lineup, the GAMING OC uses the same triple-fan WINDFORCE system for sustained thermal performance under load while delivering the same 2595 MHz boost clock in a black gaming aesthetic. The WINDFORCE cooling system combines alternate spinning fans to reduce turbulence between adjacent airflow fields, copper heat pipes for efficient heat transfer from the GPU die, and composite heatsink fins that maximise surface area within the card’s physical envelope.

NVIDIA’s DLSS 4 with Multi Frame Generation is the headline feature of the Blackwell generation — in supported titles, up to three AI-generated frames can be produced for each rendered frame, substantially multiplying effective frame rates beyond what 3840 CUDA cores deliver at native resolution. NVIDIA Reflex 2 with Frame Warp reduces system latency alongside the frame rate boost, keeping responsiveness tight in competitive titles. Gigabyte Control Center (GCC) software provides real-time monitoring, clock adjustment, fan curve customisation, and power target tuning for builders who want to push further within the card’s thermal headroom. RGB lighting integrates with RGB Fusion 2.0 for ecosystem-wide lighting coordination.

The RTX 5060 uses a PCIe 5.0 x8 electrical interface. On PCIe 5.0 and PCIe 4.0 platforms this has no meaningful real-world gaming performance impact. On PCIe 3.0 platforms the effective bandwidth is equivalent to PCIe 3.0 x4 — verify compatibility for legacy platform builds.

The 128-bit bus and 8 GB GDDR7 frame buffer are well-matched to 1080p high/ultra and 1440p with DLSS. At native 1440p or 4K maximum quality without DLSS in bandwidth-intensive titles, DLSS 4 Quality or Balanced mode is the recommended approach.

The RTX 5060 Gaming OC sits at the same factory boost clock as the AERO OC (2595 MHz) in a black gaming aesthetic, making it the natural choice for dark-themed builds where the AERO’s white finish isn’t desired.

Technical Specifications

The RTX 5060 uses NVIDIA’s GB206 Blackwell GPU (4nm) with 3840 CUDA cores, 30 RT cores, 120 Tensor cores, and 614 AI TOPs. The 8 GB GDDR7 frame buffer runs at 28 Gbps on a 128-bit bus with ~448 GB/s bandwidth. Factory boost clock is 2595 MHz (vs 2497 MHz reference). Outputs are 3× DisplayPort 2.1b and 1× HDMI 2.1b with HDCP 2.3, supporting up to four simultaneous displays at 7680×4320. A single 8-pin PCIe power connector is required with a 550W system PSU recommended.

Key Highlights

• NVIDIA GeForce RTX 5060 — Blackwell architecture (GB206), TSMC 4nm
• 3840 CUDA cores, 30 RT cores, 120 Tensor cores
• 5th-gen Tensor cores — 614 AI TOPs
• 8 GB GDDR7, 128-bit bus, 28 Gbps, ~448 GB/s bandwidth
• 2595 MHz boost (factory OC — 98 MHz above reference 2497 MHz)
• ~145W TDP — 1× 8-pin PCIe power connector
• 550W system PSU recommended
• PCIe 5.0 x8 (note: 8 lanes, not x16)
• 3× DisplayPort 2.1b + 1× HDMI 2.1b, HDCP 2.3
• Up to 4 simultaneous displays, max resolution 7680×4320
• Black gaming aesthetic — GAMING OC series
• Triple WINDFORCE fan cooler — alternate spinning fans, composite heatsink
• RGB Fusion 2.0 compatible RGB lighting
• DLSS 4 with Multi Frame Generation
• NVIDIA Reflex 2 with Frame Warp
• NVIDIA Ansel, ShadowPlay, Broadcast
• 5th-gen NVENC — AV1 / H.264 / H.265 + AV1 Ultra High Quality mode
• NVIDIA G-SYNC Compatible
• Real-time ray tracing with RTX
• VR Ready
• DirectX 12 Ultimate, OpenGL 4.6, Vulkan
• Gigabyte Control Center (GCC) software

Proudly sold by the Ringwood Digital Store.

The MSI GeForce RTX 5060 Gaming OC brings NVIDIA’s Blackwell architecture to MSI’s proven TWIN FROZR platform, delivering the RTX 5060’s full GB206 GPU performance through a compact dual-fan design with class-leading thermal engineering for its footprint. The TWIN FROZR 10 cooler uses MSI’s STORMFORCE fan blades — seven blades per fan with claw texturing and a circular arc profile designed for maximum airflow with minimum noise — fed by a nickel-plated copper baseplate that rapidly captures heat from the GPU die and VRAM, transferring it through square-profile Core Pipes that maximise contact area with the baseplate for optimal conduction. The vented metal backplate provides structural rigidity while supplementary thermal pads on its inner surface help dissipate heat from the PCB reverse side.

MSI Center software provides three user-selectable clock profiles: Gaming mode (2625 MHz boost, balanced performance and noise), Silent mode (reduced fan speeds for near-inaudible operation), and Extreme Performance mode (2640 MHz boost, maximum clock headroom). The 155W TDP sits 10W above the RTX 5060 reference specification — a reflection of the factory overclock — and remains well within a single 8-pin connector’s current delivery capability.

The RTX 5060 uses a PCIe 5.0 x8 electrical interface. On PCIe 5.0 and PCIe 4.0 platforms this has no meaningful real-world gaming performance impact. On PCIe 3.0 platforms the effective bandwidth is equivalent to PCIe 3.0 x4 — verify compatibility for legacy builds.

The 128-bit bus and 8 GB GDDR7 frame buffer are well-matched to 1080p high/ultra and 1440p with DLSS. At native 1440p or 4K maximum quality without DLSS in bandwidth-intensive titles, DLSS 4 Quality or Balanced mode is recommended.

The GAMING OC is a dual-fan (TWIN FROZR 10) card at a more compact 248 mm length. Builders wanting the triple-fan version should look at the MSI GeForce RTX 5060 Gaming Trio OC, which uses the TRI FROZR 4 cooler with three STORMFORCE fans at a slightly higher price point.

DLSS 4 Multi Frame Generation generates up to three AI frames per rendered frame in supported titles — the primary performance differentiator of the Blackwell generation over RTX 30 and RTX 40 series cards at comparable price points.

Technical Specifications

The RTX 5060 uses NVIDIA’s GB206 Blackwell GPU (4nm) with 3840 CUDA cores, 30 RT cores, 120 Tensor cores, and 614 AI TOPs. The 8 GB GDDR7 frame buffer runs at 28 Gbps on a 128-bit bus with ~448 GB/s bandwidth. Clock speeds are 2640 MHz in Extreme Performance mode and 2625 MHz in Gaming/Silent mode. TDP is 155W with a single 8-pin PCIe power connector and 550W system PSU recommended. Card dimensions are 248 × 135 × 41 mm.

Key Highlights

• NVIDIA GeForce RTX 5060 — Blackwell architecture (GB206), TSMC 4nm
• 3840 CUDA cores, 30 RT cores, 120 Tensor cores
• 5th-gen Tensor cores — 614 AI TOPs
• 8 GB GDDR7, 128-bit bus, 28 Gbps, ~448 GB/s bandwidth
• Gaming/Silent mode: 2625 MHz boost
• Extreme Performance mode: 2640 MHz boost (via MSI Center)
• 155W TDP — 1× 8-pin PCIe power connector
• 550W system PSU recommended
• PCIe 5.0 x8 (note: 8 lanes, not x16)
• 3× DisplayPort 2.1b + 1× HDMI 2.1b (4K 480Hz / 8K 120Hz HDR capable)
• Up to 4 simultaneous displays, max resolution 7680×4320
• 248 × 135 × 41 mm — compact dual-fan form factor
• TWIN FROZR 10 dual-fan cooler — STORMFORCE fans (7-blade, claw texture, circular arc)
• Nickel-plated copper baseplate
• Square-profile Core Pipes — maximised GPU contact area
• Vented metal backplate with thermal pads
• Three MSI Center performance modes: Gaming / Silent / Extreme Performance
• DLSS 4 with Multi Frame Generation
• NVIDIA Reflex 2 with Frame Warp
• NVIDIA Ansel, ShadowPlay, Broadcast
• 5th-gen NVENC — AV1 / H.264 / H.265 + AV1 Ultra High Quality mode
• NVIDIA G-SYNC Compatible
• Real-time ray tracing with RTX
• VR Ready
• DirectX 12 Ultimate, OpenGL 4.6
• MSI Center software

Proudly sold by the Ringwood Digital Store.

The RTX 5060 is built on NVIDIA’s Blackwell architecture using TSMC’s 4nm N4P process, with 3,840 CUDA cores, 120 fifth-generation Tensor Cores, and 30 fourth-generation RT Cores. The factory overclock pushes the boost clock to 2512 MHz, up from the 2497 MHz reference, across 8GB of GDDR7 at 28 Gbps on a 128-bit bus, delivering 448 GB/s of memory bandwidth. That bandwidth figure — enabled by GDDR7’s higher transfer rates — is a meaningful step up from the GDDR6-based RTX 3060’s 360 GB/s despite the same bus width. DLSS 4 with Multi Frame Generation, NVIDIA Reflex 2 with Frame Warp, hardware ray tracing, and NVIDIA Studio creative acceleration are all fully supported.

WINDFORCE MAX Cooling System

The “MAX” designation on this WINDFORCE variant denotes the upgraded cooler. WINDFORCE MAX cooling combines Hawk fans, composite copper heat pipes, and server-grade thermal conductive gel for peak-load thermal management in a compact footprint. The Hawk Fan’s unique blade geometry increases air pressure by 53.6% compared to conventional fan designs, and the sleeve bearing is enhanced with graphene lubricant for a 2.1× longer lifespan and quieter operation. The full WINDFORCE system also incorporates alternate fan spinning to reduce turbulence, a copper plate for direct GPU contact, 3D active fans, and screen cooling fins. A reinforced structure adds rigidity to the PCB and prevents sag over time.

Compact, Practical, and Power-Efficient

The card measures just 199 × 116 × 40 mm — compact enough for mid-tower and micro-ATX builds where card length is constrained. A single 8-pin PCIe power connector covers the card’s power needs, with a minimum recommended PSU of 450W — one of the lower PSU requirements in the RTX 50 series, making it a practical upgrade for systems built around modest power supplies. There’s no RGB on this card, keeping the aesthetic clean and build integration straightforward. GIGABYTE Control Center software handles monitoring, fan curve tuning, and driver management.

Connectivity

Display outputs include 3× DisplayPort 2.1b and 1× HDMI 2.1b, supporting up to 4 simultaneous displays at up to 7680×4320. The interface is PCIe 5.0, fully backwards compatible with PCIe 4.0 and 3.0 motherboards.

8GB GDDR7 note: The 128-bit bus width is shared with the previous-gen RTX 4060, but GDDR7’s higher transfer rate meaningfully improves bandwidth. At 1080p and 1440p with DLSS enabled this card performs very well; native 4K at max settings will be limited by the 8GB VRAM ceiling on texture-heavy titles.

PCIe compatibility note: This card uses PCIe 5.0 and is electrically x16. It is fully backward compatible with PCIe 4.0 and 3.0 motherboards with no performance penalty at this performance tier.

Key Highlights

• NVIDIA Blackwell architecture — 3,840 CUDA cores (GB206-250, TSMC 4nm)
• 8GB GDDR7, 128-bit bus, 28 Gbps, 448 GB/s bandwidth
• 2512 MHz boost clock (factory OC over 2497 MHz reference)
• WINDFORCE MAX cooling — Hawk fans, composite copper heat pipes, server-grade thermal gel
• Hawk Fan: 53.6% higher air pressure, graphene lubricant, 2.1× fan lifespan
• Alternate fan spinning + 3D active fans + screen cooling
• Reinforced structure — no RGB
• DLSS 4 with Multi Frame Generation + NVIDIA Reflex 2 with Frame Warp
• 4th Gen RT Cores (30) + 5th Gen Tensor Cores (120)
• 3× DisplayPort 2.1b, 1× HDMI 2.1b — up to 4 displays / 8K output
• PCIe 5.0 x16, backwards compatible
• 199 mm length, 2-slot design
• ~150W TDP — 1× 8-pin PCIe power connector
• 450W PSU recommended

Proudly sold by the Ringwood Digital Store.

GIGABYTE produces several RTX 5060 variants, and the Eagle MAX OC occupies the considered middle ground. Its 2550 MHz boost clock sits above the WINDFORCE OC’s 2512 MHz and below the Gaming OC’s 2595 MHz, paired with the same core spec: 3,840 CUDA cores on NVIDIA’s Blackwell architecture, 8GB GDDR7 at 28 Gbps across a 128-bit bus, delivering 448 GB/s of memory bandwidth. The “MAX” designation indicates the larger-footprint WINDFORCE MAX cooler with Hawk fans rather than a higher clock ceiling. You get more cooler headroom and quieter sustained operation compared to the standard Eagle OC, without paying for RGB lighting or a Dual BIOS.

WINDFORCE Hawk Fan Cooling

The WINDFORCE cooling system uses Hawk fans and server-grade thermal conductive gel to manage heat across the GPU die, VRAM, and MOSFET array. The Hawk Fan’s blade geometry, inspired by an eagle’s wing aerodynamics, reduces air resistance and noise while delivering a 53.6% increase in air pressure and a 12.5% increase in air volume compared to conventional axial designs. Graphene nano lubricant on the sleeve bearings extends fan life by 2.1 times and reduces operating noise, approaching the longevity of double ball bearing fans. 3D Active Fan technology keeps the fans stopped entirely during light loads and low-power games, providing silent idle operation until the GPU genuinely needs cooling.

Build Quality

A reinforced structure braces the PCB against sag — practical on a card of this size in a chassis without a GPU support bracket. Server-grade thermal conductive gel is used over VRAM and MOSFETs, providing optimal contact across uneven surfaces and resisting deformation from transport and long-term use — a meaningful improvement over the standard thermal pads found on many mid-range cards. There’s no RGB on this variant; the aesthetic is clean matte black, fitting any build.

Connectivity and Power

Display outputs include 3× DisplayPort 2.1b and 1× HDMI 2.1b, supporting up to 4 simultaneous displays at 7680×4320. A single 8-pin PCIe power connector is required, with a 550W PSU recommended. The interface is PCIe 5.0, fully backwards compatible with PCIe 4.0 and 3.0 motherboards. GIGABYTE Control Center software handles monitoring, fan curves, and overclocking.

8GB GDDR7 note: Strong at 1080p and 1440p with DLSS enabled. The 128-bit bus and 8GB VRAM will limit native 4K performance at maximum texture settings in the most demanding AAA titles — DLSS 4 with Multi Frame Generation is the recommended path to 4K on this card.

PCIe compatibility: PCIe 5.0 card, fully backward compatible with PCIe 4.0 and 3.0 slots. No performance penalty at this tier from the interface.

Key Highlights

• NVIDIA Blackwell architecture — 3,840 CUDA cores
• 8GB GDDR7, 128-bit bus, 28 Gbps, 448 GB/s bandwidth
• 2550 MHz boost clock (above WINDFORCE OC, below Gaming OC)
• WINDFORCE MAX cooling — Hawk fans with 53.6% higher air pressure
• Graphene nano lubricant bearings — 2.1× lifespan, quieter operation
• 3D Active Fan — silent idle under light loads
• Server-grade thermal conductive gel on VRAM and MOSFETs
• Reinforced PCB structure — no RGB
• DLSS 4 with Multi Frame Generation + NVIDIA Reflex 2 with Frame Warp
• 4th Gen RT Cores + 5th Gen Tensor Cores
• 3× DisplayPort 2.1b, 1× HDMI 2.1b — up to 4 displays / 8K output
• PCIe 5.0, backwards compatible with PCIe 4.0 / 3.0
• 2-slot design
• Single 8-pin PCIe power connector
• 550W PSU recommended
• GIGABYTE Control Center software

Proudly sold by the Ringwood Digital Store.

It’s worth being upfront about where the ICE edition sits: the Eagle OC ICE shares every specification with the standard Eagle OC black variant — 2550 MHz boost clock, 3,840 CUDA cores, 8GB GDDR7 at 28 Gbps on a 128-bit bus, PCIe 5.0, the same WINDFORCE Hawk fan cooler, the same PCB. The defining difference is the white shroud and fan frame, making it the natural choice for white or light-themed builds where a black GPU would look out of place against white cases, white motherboards, and white RAM. If the build colour doesn’t matter to you, either Eagle OC variant performs identically.

Blackwell RTX 5060 Performance

The 2550 MHz factory overclock sits above the 2497 MHz reference and above the WINDFORCE OC’s 2512 MHz, delivering 448 GB/s of memory bandwidth from 8GB of GDDR7 across a 128-bit bus — the same figure as every other RTX 5060. NVIDIA Blackwell brings fourth-generation RT Cores and fifth-generation Tensor Cores, along with DLSS 4 with Multi Frame Generation, NVIDIA Reflex 2 with Frame Warp, and the full NVIDIA Studio creative acceleration stack. The RTX 5060 is well-suited to 1080p gaming and strong at 1440p with DLSS enabled.

WINDFORCE Hawk Fan Cooling

The WINDFORCE cooling system uses Hawk fans and server-grade thermal conductive gel — the same thermal stack as the black Eagle OC. Hawk fans deliver 53.6% higher air pressure and 12.5% more air volume than conventional axial designs through their eagle-wing-inspired blade geometry, and graphene nano lubricant extends bearing life by 2.1× while reducing noise. 3D Active Fan technology keeps the fans off entirely during low-load and low-power scenarios, with automatic spin-up when gaming begins. A reinforced structure supports the PCB and prevents sag in horizontal builds.

Build Integration and Connectivity

The card measures 208 × 120 × 40 mm in a 2-slot form factor, fitting standard mid-tower and micro-ATX cases. Display outputs include 3× DisplayPort 2.1b and 1× HDMI 2.1b, supporting up to 4 simultaneous displays at 7680×4320. A single 8-pin PCIe power connector and a 550W PSU are recommended. The interface is PCIe 5.0, operating at x8 electrically, fully backwards compatible with PCIe 4.0 and 3.0 motherboards.

ICE vs Eagle OC: The ICE edition is the white-coloured version of the Eagle OC. Every specification — boost clock, cooler, TDP, outputs — is identical. Choose based on your build’s colour theme.

No RGB: Neither the ICE nor the standard Eagle OC includes RGB lighting. The white shroud is a fixed colour, not addressable. If you want RGB, the Gaming OC is the relevant GIGABYTE RTX 5060 variant.

8GB GDDR7 note: Strong at 1080p and capable at 1440p with DLSS enabled. The 128-bit bus and 8GB VRAM will limit native 4K at maximum settings in texture-heavy AAA titles — DLSS 4 with Multi Frame Generation is the recommended path to smooth 4K.

PCIe compatibility: PCIe 5.0 card operating at x8 electrical. Fully backward compatible with PCIe 4.0 and 3.0 slots with no performance penalty at this tier.

Key Highlights

• NVIDIA Blackwell architecture — 3,840 CUDA cores
• 8GB GDDR7, 128-bit bus, 28 Gbps, 448 GB/s bandwidth
• 2550 MHz boost clock (factory OC over 2497 MHz reference)
• White shroud — ICE edition for white / light-themed builds
• WINDFORCE Hawk fan cooling — 53.6% higher air pressure
• Graphene nano lubricant bearings — 2.1× lifespan, quieter operation
• 3D Active Fan — silent semi-passive idle
• Server-grade thermal conductive gel on GPU, VRAM and MOSFETs
• Reinforced PCB structure — no RGB
• DLSS 4 with Multi Frame Generation + NVIDIA Reflex 2 with Frame Warp
• 4th Gen RT Cores + 5th Gen Tensor Cores
• 3× DisplayPort 2.1b, 1× HDMI 2.1b — up to 4 displays / 8K output
• PCIe 5.0 x16 slot (x8 electrical), backwards compatible
• 208 mm length, 2-slot design
• Single 8-pin PCIe power connector
• 550W PSU recommended
• GIGABYTE Control Center software

Proudly sold by the Ringwood Digital Store.

The INSPIRE line seamlessly fuses a sleek, compact design with cutting-edge performance, aimed at creative and professional builds where aesthetics matter alongside capability. The Mondrian grid-inspired design language — clean geometric lines in a modern art aesthetic — distinguishes it visually from MSI’s gaming-first VENTUS and Shadow lines without resorting to RGB or aggressive shroud styling. Under the hood it’s the same Blackwell RTX 5060 silicon: 3,840 CUDA cores, 8GB GDDR7 at 28 Gbps on a 128-bit bus, delivering 448 GB/s of memory bandwidth. The boost clock reaches 2535 MHz standard, with 2550 MHz available via MSI Center’s Extreme Performance mode — placing it above the VENTUS and Shadow (2527 MHz) and in line with the GIGABYTE Eagle OC (2550 MHz). DLSS 4 with Multi Frame Generation, NVIDIA Reflex 2 with Frame Warp, fourth-generation RT Cores, and fifth-generation Tensor Cores are fully supported alongside NVIDIA Studio creative acceleration tools.

STORMFORCE Dual-Fan Cooling with Metal Backplate

The STORMFORCE fans feature seven blades with a claw texture and a circular arc geometry, engineered for high static pressure airflow with minimal noise — the same fan design found on MSI’s Gaming OC tier, stepping up from the TORX Fan 5.0 found on VENTUS and Shadow variants. Heat pipes draw thermal energy efficiently away from the GPU die to the heatsink fins. Where the Inspire genuinely differentiates itself from VENTUS and Shadow is the backplate: a reinforcing metal backplate is equipped with thermal pads to enhance cooling capacity, while airflow vents allow exhaust air to pass directly through — providing both structural rigidity and active thermal contribution, unlike the plastic backplates on the VENTUS and Shadow. MSI Center lets you choose between Gaming mode for full performance and Silent mode for reduced noise, with Afterburner available for full manual overclocking.

Where It Sits in the RTX 5060 Lineup

The Inspire 2X OC occupies an interesting position — clocked above VENTUS and Shadow, with STORMFORCE fans and a metal backplate that approach Gaming OC territory, but in a more compact 204 mm body with a distinctive creative aesthetic rather than aggressive gaming styling. At 204 × 117 × 41 mm it is one of the more compact full-height RTX 5060 designs available, making it well-suited to workstation-style builds, creators using micro-ATX platforms, and anyone who wants capable GPU performance without a shroud that looks like it belongs in a gaming PC.

Power and Connectivity

The card draws 145W through a single 8-pin PCIe connector with a 550W PSU recommendation. Display outputs cover 3× DisplayPort 2.1b and 1× HDMI 2.1b, supporting up to 4 simultaneous displays at 7680×4320. The interface is PCIe Gen 5 x16, operating electrically at x8, fully backwards compatible with PCIe 4.0 and 3.0 motherboards.

Inspire vs Shadow vs VENTUS: All three boost to similar clocks (VENTUS/Shadow: 2527 MHz, Inspire: 2535 MHz). The Inspire adds STORMFORCE fans (vs TORX Fan 5.0) and a metal backplate with thermal pads (vs plastic backplate). Choose VENTUS for the lowest price, Shadow for better thermal contact via copper baseplate, Inspire for the metal backplate, STORMFORCE fans, and creative build aesthetic.

8GB GDDR7 note: Strong at 1080p and capable at 1440p with DLSS enabled. The 128-bit bus and 8GB VRAM ceiling will limit native 4K at maximum settings in texture-heavy AAA titles — DLSS 4 with Multi Frame Generation is the recommended path to smooth 4K.

PCIe lane note: PCIe Gen 5 x16 slot, operating at x8 electrically. Fully compatible with PCIe 4.0 and 3.0 motherboards with no performance penalty at this tier.

Key Highlights

• NVIDIA Blackwell architecture — 3,840 CUDA cores
• 8GB GDDR7, 128-bit bus, 28 Gbps, 448 GB/s bandwidth
• 2535 MHz boost / 2550 MHz Extreme Performance (MSI Center)
• STORMFORCE dual fans — seven claw-textured blades with circular arc geometry
• Metal backplate with thermal pads and airflow vents
• Mondrian grid-inspired design — creative and professional aesthetic
• Gaming / Silent BIOS modes via MSI Center
• No RGB
• DLSS 4 with Multi Frame Generation + NVIDIA Reflex 2 with Frame Warp
• 4th Gen RT Cores + 5th Gen Tensor Cores
• NVIDIA Studio creative acceleration support
• 3× DisplayPort 2.1b, 1× HDMI 2.1b — up to 4 displays / 8K output
• PCIe 5.0 x16 slot (x8 electrical), backwards compatible
• 204 mm length, 2-slot design
• 145W TDP — single 8-pin PCIe power connector
• 550W PSU recommended
• MSI Center + MSI Afterburner software

Proudly sold by the Ringwood Digital Store.

Like GIGABYTE’s Eagle OC ICE, the VENTUS 2X OC White is a colourway variant rather than a separate performance tier. Every specification is shared with the black VENTUS 2X OC: 3,840 CUDA cores, 8GB GDDR7 at 28 Gbps on a 128-bit bus, boosting to 2527 MHz standard with 2535 MHz available through MSI Center’s Extreme Performance mode. The white shroud and fans make it the natural fit for white builds, while maintaining the VENTUS line’s core identity of a focused, no-frills thermal solution. If build colour isn’t a consideration, the black VENTUS 2X OC performs identically at the same price point.

Blackwell RTX 5060 — The Full Feature Set

The RTX 5060 carries 3,840 stream processors, 120 TMUs, 30 RT cores, and 120 Tensor Cores, with a 128-bit memory bus running at 28 Gb/s for 448 GB/s total bandwidth. The full Blackwell platform feature set is present: DLSS 4 with Multi Frame Generation, NVIDIA Reflex 2 with Frame Warp, fourth-generation RT Cores for hardware ray tracing, and NVIDIA Studio acceleration for creative applications. G-SYNC compatibility is supported across all display outputs.

TORX Fan 5.0 Cooling in White

TORX Fan 5.0 blades are linked by ring arcs to stabilise and maintain high-pressure airflow across the heatsink. Heat pipes draw thermal energy efficiently away from the GPU die, and a vented reinforcing backplate allows exhaust air to pass directly through rather than recirculating. ZERO FROZR stops the fans entirely under light loads for completely silent idle operation, with automatic spin-up when gaming begins. The white fan blades and shroud are a fixed colour — there is no RGB lighting on this card.

Power and Connectivity

The card draws 145W through a single 8-pin PCIe connector with a 550W PSU recommendation, measures 197 × 120 × 41 mm, and fits a 2-slot footprint. Display outputs are 3× DisplayPort 2.1b and 1× HDMI 2.1b, supporting up to 4 simultaneous displays at 7680×4320. The interface is PCIe Gen 5 x16, operating electrically at x8, fully backwards compatible with PCIe 4.0 and 3.0 motherboards. MSI Center provides real-time monitoring and tuning, while MSI Afterburner gives full manual overclock control.

White vs black VENTUS 2X OC: The only difference between this card and the black VENTUS 2X OC (G5060-8V2C) is the shroud colour. All specs, clocks, and cooling components are identical. Choose based on build colour.

No RGB: The white finish is a fixed aesthetic — there are no addressable LEDs on this card. For white RGB on an RTX 5060, a different SKU would be needed.

8GB GDDR7 note: Strong at 1080p and capable at 1440p with DLSS enabled. The 128-bit bus and 8GB VRAM will limit native 4K performance at maximum texture settings in demanding AAA titles — DLSS 4 with Multi Frame Generation is the recommended path to smooth 4K.

PCIe compatibility: PCIe 5.0 card operating at x8 electrical. Fully backward compatible with PCIe 4.0 and 3.0 slots with no performance penalty at this tier.

Key Highlights

• NVIDIA Blackwell architecture — 3,840 CUDA cores
• 8GB GDDR7, 128-bit bus, 28 Gbps, 448 GB/s bandwidth
• 2527 MHz boost / 2535 MHz Extreme Performance (MSI Center)
• All-white shroud and fans — designed for white builds
• TORX Fan 5.0 dual fans with ZERO FROZR silent idle
• Vented reinforcing backplate
• No RGB — fixed white aesthetic
• DLSS 4 with Multi Frame Generation + NVIDIA Reflex 2 with Frame Warp
• 4th Gen RT Cores + 5th Gen Tensor Cores
• 3× DisplayPort 2.1b, 1× HDMI 2.1b — up to 4 displays / 8K output
• PCIe 5.0 x16 slot (x8 electrical), backwards compatible
• 197 mm length, 2-slot design
• 145W TDP — single 8-pin PCIe power connector
• 550W PSU recommended
• MSI Center + MSI Afterburner software

Proudly sold by the Ringwood Digital Store.