The AD5U480016G uses a 2048×8 dual-rank IC configuration — two ranks of DRAM chips on a single module, allowing the memory controller to interleave between ranks for improved effective memory bandwidth. This is a meaningful topology advantage over the 8GB’s single-rank 1024×16 arrangement, particularly in workloads with high memory access parallelism. At 16GB in a single slot, it’s the most capacity-efficient single-DIMM DDR5-4800 entry point in this range.

DDR5 Platform Features

All DDR5 architectural advantages carry through to the 16GB variant. ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s — 50% higher than DDR4-3200 — with the maximum frequency increased 1.63 times compared to DDR4. On-die ECC provides additional protection against single-bit errors inside DDR5 arrays, and the built-in Power Management IC (PMIC) delivers enhanced power supply stability. Operating at 1.1V, it is 8% more power-efficient than DDR4.

Performance Profile

The AD5U480016G runs at DDR5-4800 (PC5-38400) with CL40-40-40-77 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. Speed is natively achieved at DDR5-4800 on any compatible platform straight out of the box.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. DDR5 U-DIMM modules have the same dimensions and pin count as DDR4 modules, but the most obvious difference is the position of the fool-proof notch — DDR5 also integrates I/O resistors with CMD/ADD resistors. DDR5 requires a DDR5-capable motherboard and CPU — Intel 12th generation Alder Lake or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

8GB vs 16GB Value DDR5-4800

The 16GB AD5U480016G delivers double the capacity of the 8GB AD5U48008G in a single slot, using a dual-rank (2Rx8) configuration vs the 8GB’s single-rank (1024×16) arrangement. For systems targeting 16GB total in a single slot, the 16GB variant is the more efficient choice; for 16GB dual-channel configurations, two 8GB sticks may be preferred.

Single stick = single channel: For dual-channel bandwidth, install a second AD5U480016G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40-40-40-77
• Rank / IC: Dual rank, 2048×8
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• ECC: Non-ECC unbuffered (on-die ECC is internal to DDR5 architecture)
• RGB: None
• Bandwidth: 38.4GB/s
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The ADATA Value DDR5-4800 introduces a generation of architectural improvements over DDR4 that go well beyond raw speed. ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s — 50% higher than DDR4-3200 — operating on just 1.1V, making them 8% more power-efficient than DDR4.

Previously only available to server-grade memory, DDR5 now comes with on-die ECC (Error Correction Code) to provide additional protection against single-bit errors inside DDR5 arrays. ADATA DDR5 utilises on-module voltage regulation with a Power Management IC (PMIC), resulting in better signalling. DDR5 doubles the number of bank groups while keeping the number of banks per bank group the same compared to DDR4, allowing for higher capacities within the same physical footprint.

Performance Profile

The AD5U48008G runs at DDR5-4800 (PC5-38400) with CL40-40-40-77 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. CL40 is the standard JEDEC latency for DDR5-4800, consistent across all entry-level DDR5 modules at this speed grade. While the absolute CAS number is higher than DDR4 equivalents, the shorter clock cycle at 4800MHz means actual latency in nanoseconds is comparable to DDR4-3200 CL22 — and raw bandwidth is substantially higher.

No XMP on this module: DDR5-4800 is achieved natively via JEDEC specification — no BIOS tuning required.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. DDR5 UDIMMs use a different 288-pin connector that is physically incompatible with DDR4 sockets despite sharing the same pin count. DDR5 requires a DDR5-capable motherboard and CPU — on Intel, this means 12th generation Alder Lake or later on a DDR5-capable board (Z690/B660/H670 and later); on AMD, this means Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen motherboards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Quality & Compatibility

ADATA Premier Series memory modules are designed specifically to boost overall computer performance and ensure system stability, and are stringently tested in thorough conformance with industry standards to ensure compatibility and reliability. The AD5U48008G is the distribution-channel Value variant of ADATA’s DDR5-4800 8GB UDIMM platform, carrying the same JEDEC specification as the retail Premier series. Backed by a limited lifetime warranty.

Single stick = single channel: For dual-channel bandwidth, install a second AD5U48008G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40-40-40-77
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes — real-time single-bit error correction
• PMIC: Yes — on-module power management IC
• ECC: Non-ECC (unbuffered; on-die ECC is internal to DDR5 architecture)
• Buffering: Unbuffered
• RGB: None
• Bandwidth: 38.4GB/s
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The AD5U480016G-S carries the -S retail suffix, identifying it as ADATA’s Premier series — the retail-packaged and Premier-branded variant of the same DDR5-4800 16GB UDIMM platform as the Value AD5U480016G listed elsewhere in this range. ADATA Premier Series memory modules are designed specifically to boost overall computer performance and ensure the stability of your systems. In thorough conformance with industry standards, the Premier Series modules are stringently tested to ensure their compatibility and reliability, making them your first choice for memory upgrades in terms of quality and affordability. For buyers who prefer retail-packaged memory with explicit Premier branding, the AD5U480016G-S is the appropriate choice; for volume deployments and distribution-channel procurement, the bare AD5U480016G delivers the same specification.

DDR5 Platform Features

All DDR5 architectural advantages carry through identically. ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s, which is 50% higher than DDR4-3200, with the maximum frequency increased 1.63 times compared to DDR4. Previously only available to server-grade memory, DDR5 now comes with on-die ECC to provide additional protection against single-bit errors inside DDR5 arrays. ADATA DDR5 utilises on-module voltage regulation with a PMIC, resulting in better signalling. DDR5 operates at only 1.1V, a close to 30% power consumption reduction compared to DDR4.

Performance Profile & IC Configuration

The AD5U480016G-S runs at DDR5-4800 (PC5-38400) with CL40-40-40-77 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. The 2048×8 dual-rank configuration allows the memory controller to interleave between ranks for improved effective memory bandwidth, a meaningful advantage over single-rank alternatives at the same 16GB capacity.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation Alder Lake or later on a DDR5-compatible board (Z690/B660/H670 and later), or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth, install a second AD5U480016G-S in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40-40-40-77
• Rank / IC: Dual rank, 2048×8
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• ECC: Non-ECC unbuffered
• RGB: None
• Bandwidth: 38.4GB/s
• Series: ADATA Premier (retail packaged)
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The KF548C38BBAK2-16 is a 2×8GB matched kit — two 8GB modules tested and validated together by Kingston for dual-channel operation. Installing both modules in your motherboard’s recommended paired DIMM slots activates dual-channel mode from the outset, doubling effective memory bandwidth compared to a single 8GB or 16GB stick. This is the first kit listing in this memory range; all previous DDR5 modules are sold as single sticks. For DDR5 systems targeting dual-channel from day one, this kit is the appropriate starting point.

XMP 3.0: Next-Generation Overclocking

The Fury Beast DDR5 is the first module in this range to support Intel XMP 3.0 — the DDR5-generation successor to XMP 2.0. XMP 3.0 and AMD EXPO are the two new DDR5 overclock specs that include customizable profiles for speeds and timings, with Kingston FURY Beast DDR5 covering compatible overclock solutions for both platforms. XMP 3.0 allows for up to five stored profiles (compared to XMP 2.0’s two), and supports user-customisable profile slots stored directly on the module’s SPD hub — a DDR5-specific capability not available on any DDR4 XMP 2.0 module. Enabling XMP 3.0 in BIOS unlocks DDR5-4800 at CL38 at 1.1V; the JEDEC default without XMP is typically DDR5-4800 at CL40.

XMP 3.0 for rated CL38 timings: Without enabling XMP 3.0 in BIOS, this kit defaults to JEDEC DDR5-4800 at CL40. Enable XMP 3.0 to unlock the rated CL38-38-38 profile. AMD EXPO is also supported for Ryzen 7000 (AM5) platforms.

RGB Lighting & Heat Spreader

The integrated heat spreader features RGB lighting that can be customised to your liking when paired with your motherboard manufacturer’s dedicated software. The Fury Beast DDR5 RGB heat spreader is newly designed — combining bold styling and prodigious cooling functionality — while keeping a profile compatible with the majority of tower CPU coolers. RGB sync compatibility covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

DDR5 Platform Features

On-die ECC (ODECC) helps maintain data integrity to sustain ultimate performance while pushing the limits. Boosted by double the banks and burst length and two independent 32-bit subchannels, DDR5’s exceptional handling of data shines with the latest games, programs and demanding applications. Advanced pre-optimised timings, speed and voltage for overclocking performance, with the ability to save new user-customisable profiles utilising a programmable PMIC.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later. XMP 3.0 is natively supported on Intel 12th gen and later; AMD EXPO is supported on AM5 platforms.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Key Highlights

• Capacity: 16GB (2×8GB) — matched dual-channel kit
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL38-38-38 (XMP 3.0); CL40 (JEDEC default)
• Voltage: 1.1V
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes — programmable, with user-customisable profile support
• Dual Subchannel: Yes — two independent 32-bit channels per module
• RGB: Yes — integrated heat spreader RGB; software sync
• Contact fingers: Gold
• RGB Software: ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• ECC: Non-ECC unbuffered
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

Transcend’s DDR5 JetRam line carries forward the defining quality differentiator of the DDR4 JetRam already listed in this range. Compliant with JEDEC international standards, Transcend’s new-gen DDR5 JetRam memory modules are manufactured with true ETT grade, brand-name DRAM chips that have passed Transcend’s strict screening process and rigorous environmental testing. The module ships on a standard green PCB with no heat spreader and no RGB — Transcend’s focus, as with DDR4 JetRam, is on component quality and long-term reliability over aesthetics. PCB height is 1.23 inches, fitting virtually all desktop cases and CPU cooler configurations.

DDR5 Architecture & Dual Subchannel Design

The DDR5 generation introduces a meaningful internal architectural change over DDR4 that directly benefits performance. DDR5 features two independent 32-bit channels that bring speeds to 4,800MT/s. Each DDR5 module effectively presents two independent 32-bit memory channels to the memory controller rather than DDR4’s single 64-bit channel — improving memory access parallelism and burst efficiency. The 1.1V low working voltage and PMIC effectively reduce signal interruption while cutting down power consumption, and on-die ECC automatically spots and corrects data errors, enhancing data integrity and system stability.

Single-Rank (1Rx8) Configuration

The JM4800ALE-16G uses a 1Rx8 single-rank configuration with a (2Gx8)×8 component composition — eight 2Gx8 chips in a single-rank arrangement. This contrasts with the dual-rank (2Rx8) configuration found on the ADATA Value and Premier DDR5-4800 16GB modules in this range. For most everyday workloads the practical performance difference between single-rank and dual-rank at 16GB is negligible; single-rank typically offers slightly better signal integrity in multi-slot populated boards, while dual-rank provides marginally better memory bus interleaving in memory-intensive workloads.

Performance Profile

The JM4800ALE-16G runs at DDR5-4800 (PC5-38400) with CL40 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. Operating temperature is 0°C to 85°C. The module will run at rated DDR5-4800 speed on any compatible platform straight out of the box.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation Alder Lake or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth, install a second JM4800ALE-16G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40
• Rank / IC: 1Rx8 single rank, (2Gx8)×8
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• Dual Subchannel: Yes — two independent 32-bit channels
• DRAM: ETT grade, brand-name chips
• PCB Height: 1.23 inches
• Operating Temp: 0°C to 85°C
• RGB: None
• ECC: Non-ECC unbuffered
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

Patriot’s Signature Line DDR5 memory modules are designed to deliver an immense performance improvement for next generation Intel platforms. Requiring only 1.1V of power, Signature DDR5 modules consume less power and emit less heat despite the increased frequency and speed.

The DDR5 Signature Line introduces several architectural improvements beyond the DDR4 Signature Line worth noting:

Enhanced power improvements include an onboard Power Management IC (PMIC), which provides better control of local voltage regulation while delivering increased threshold protection, simultaneous monitoring, intelligent voltage, and power management.

The Signature Line DDR5 series includes onboard thermal sensors to monitor and protect against thermal issues and better overall reporting. The SPD Hub with I3C/I2C sideband access enables system-level thermal and power management communication — a DDR5 platform standard not present on any DDR4 module in this range.

The latest on-die ECC further enhances the accuracy of data-processing and your overall system’s stability.

Performance Profile

The PSD516G480081 is a 16GB (1×16GB) DDR5-4800 (PC5-38400) 288-pin UDIMM running at 40-40-40-77 timings at 1.1V, unbuffered and non-ECC. Speed is JEDEC-native at DDR5-4800 — no XMP profile, no BIOS configuration required. The module will run at rated speed on any compatible DDR5 platform straight out of the box.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

Patriot Signature DDR5 vs DDR4 Signature Line

The DDR5 PSD516G480081 is a generational step up from the DDR4 Signature Line modules listed elsewhere in this range — delivering 38.4GB/s bandwidth (50% higher than DDR4-3200), lower operating voltage (1.1V vs 1.2V), on-die ECC, PMIC voltage regulation, and onboard thermal sensing, all at 16GB single-stick capacity. For DDR5-capable systems, this is the entry-level Patriot Signature upgrade.

DDR5 Platform Requirements & Part Number Disambiguation

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required. Note that the PSD516G480081S (with trailing S) is the SO-DIMM laptop variant — confirm you have the correct 288-pin UDIMM desktop variant (PSD516G480081) before purchasing.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Desktop vs laptop variant: The PSD516G480081S (with trailing S) is a 262-pin SO-DIMM laptop module. This listing is for the PSD516G480081 288-pin desktop UDIMM. Confirm the correct variant before purchasing.

Single stick = single channel: For dual-channel bandwidth, install a second PSD516G480081 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40-40-40-77
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — onboard power management IC
• Thermal Sensor: Yes — onboard, with SPD Hub (I3C/I2C)
• ECC: Non-ECC unbuffered
• RGB: None
• Testing: 100% factory tested
• Standards: RoHS compliant
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

At 32GB in a single module, the AD5U480032G-S is the highest-capacity single-stick DDR5 listing in this range. For systems with two DIMM slots, a single 32GB stick leaves the second slot free — enabling a future 64GB dual-channel upgrade without replacing any installed memory. For workstation-grade workflows including virtualisation, large-scale video editing, 3D rendering, data analysis, and multi-application multitasking, 32GB in a single slot delivers meaningful headroom well beyond what 8GB or 16GB alternatives can offer.

Dual-Rank (2Rx8) Configuration

The AD5U480032G-S uses a dual-rank (2Rx8) IC configuration — the same topology as the 16GB Premier (AD5U480016G-S) — allowing the memory controller to interleave between ranks for improved effective memory bandwidth. At 32GB, dual-rank is the standard configuration as it is the most practical way to achieve this density within DDR5 DRAM chip constraints.

DDR5 Platform Features

The future of DRAM is here in the form of the ADATA DDR5-4800 U-DIMM module. Compared to its predecessors, this module provides a significant speed boost, higher capacities, reduced power consumption, and increased bandwidth per CPU core. ADATA DDR5 memory modules deliver frequencies of up to 4800MT/s and feature bandwidth of 38.4GB/s — 50% higher than DDR4-3200 — operating at only 1.1V. On-die ECC provides real-time single-bit error correction, and the built-in PMIC delivers enhanced power supply stability with cleaner signalling.

Performance Profile

The AD5U480032G-S runs at DDR5-4800 (PC5-38400) with CL40-40-40-77 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. Speed is natively achieved at DDR5-4800 on any compatible DDR5 platform straight out of the box.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

Platform Requirements & Capacity Verification

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required. At 32GB single-module capacity, it is critical to verify your motherboard’s maximum per-slot memory capacity before purchasing — not all DDR5 motherboards support 32GB single modules. Consult your motherboard’s specifications or QVL (Qualified Vendor List) to confirm 32GB per-slot support.

Verify 32GB per-slot support: Not all DDR5 motherboards support 32GB single modules. Check your motherboard’s specifications or QVL before purchasing.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth, install a second AD5U480032G-S in your motherboard’s recommended paired DIMM slots — enabling 64GB dual-channel. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 32GB (1×32GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40-40-40-77
• Rank / IC: Dual rank (2Rx8)
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• ECC: Non-ECC unbuffered
• RGB: None
• Bandwidth: 38.4GB/s
• Series: ADATA Premier (retail packaged)
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

DDR5-6000 occupies an increasingly attractive position in the DDR5 performance landscape — as Kingston’s own product page notes, increasingly attractive pricing makes DDR5-6000 a safe bet for this generation and the next. At 6000MT/s the module delivers bandwidth of approximately 48GB/s per channel — a significant step up from DDR5-4800’s 38.4GB/s — and on AMD Ryzen 7000 (AM5) platforms it enables a favourable FCLK ratio configuration. On Intel 12th, 13th, and 14th generation platforms the higher frequency translates directly to improved gaming frame rates and application performance in memory-bandwidth-sensitive workloads.

CL30: Exceptional Primary Latency for DDR5-6000

The KF560C30BB-8’s CL30 primary timing is a headline specification — CL30 at 6000MT/s represents one of the tightest primary latency profiles available in consumer DDR5. Kingston FURY Beast DDR5 memory brings cutting-edge technology for next-gen gaming platforms, with on-die ECC (ODECC) for improved stability at extreme speeds, dual 32-bit subchannels for increased efficiency, and an on-module PMIC to provide power where it’s needed most. The combination of high frequency and tight primary timing delivers lower absolute memory access latency in nanoseconds compared to the DDR5-4800 CL40 JEDEC modules in this range.

1Rx16 IC Configuration

The KF560C30BB-8 is built on four 1G×16-bit FBGA components in a 1Rx16 single-rank configuration — a notably lean build that achieves DDR5-6000 CL30 performance with a minimal chip count. This is atypical for high-frequency DDR5 and reflects Kingston’s IC qualification process for XMP 3.0 at this speed grade.

XMP 3.0 Performance Profile

The module supports Intel XMP 3.0, tested at DDR5-6000 CL30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard DDR5-4800 at 40-39-39 at 1.1V. XMP 3.0 must be enabled in BIOS to unlock the rated DDR5-6000 CL30 profile. At 1.4V, the operating voltage is higher than JEDEC DDR5-4800 — this is normal and expected for high-frequency DDR5 XMP operation and within safe DDR5 voltage parameters.

XMP 3.0 must be enabled for rated speed: Without XMP 3.0 activated in BIOS, this module defaults to JEDEC DDR5-4800 at CL40-39-39 at 1.1V. Enable XMP 3.0 to unlock DDR5-6000 at CL30-36-36. Updating your BIOS before installation is strongly recommended for best XMP 3.0 compatibility.

1.4V is normal at DDR5-6000: The elevated operating voltage under XMP is within safe DDR5 parameters and is not a defect.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later. XMP 3.0 is supported natively on Intel 12th gen and later; AMD platforms should use EXPO where supported, or manually apply the XMP profile.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Single stick = single channel: For dual-channel bandwidth, install a second module in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0
• Timings: CL30-36-36 @ 1.4V (XMP 3.0); CL40-39-39 @ 1.1V (JEDEC DDR5-4800)
• Rank / IC: 1Rx16 single rank, 4× 1G×16-bit FBGA components
• Voltage: 1.4V (XMP 3.0) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 supported
• On-Die ECC: Yes
• PMIC: Yes
• Dual Subchannel: Yes
• RGB: None
• Heat Spreader: Black aluminium — FURY Beast
• Contact fingers: Gold
• Operating Temp: 0°C to +85°C
• Colour: Black
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Superseded by: KF560C30BBE-8
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The JM4800ALE-32G brings Transcend’s ETT-grade DRAM quality assurance to 32GB single-stick capacity — the largest module in the JetRam DDR5-4800 desktop lineup. DDR5 features two independent 32-bit channels that bring speeds to 4,800MT/s. 1.1V low working voltage and PMIC effectively reduce signal interruption while cutting down power consumption for your computer. On-die ECC automatically spots and corrects data errors, enhancing data integrity and system stability. The module ships on a standard green PCB at 1.23 inches height — fitting virtually all desktop cases and CPU cooler configurations — with no heat spreader and no RGB.

Dual-Rank (2Rx8) Configuration

The JM4800ALE-32G uses a 2Rx8 dual-rank (2Gx8)×8 configuration — the same IC topology as the 16GB JM4800ALE-16G but with dual-rank arrangement to achieve the doubled 32GB capacity. The dual-rank configuration allows the memory controller to interleave between ranks, delivering improved effective memory bandwidth compared to single-rank alternatives at the same capacity, particularly in memory-intensive workloads such as virtualisation, large dataset processing, and multi-threaded productivity applications.

16GB vs 32GB JetRam DDR5-4800

Both the JM4800ALE-16G and JM4800ALE-32G use the same (2Gx8)×8 IC composition, but the 32GB module uses dual-rank (2Rx8) while the 16GB uses single-rank (1Rx8). For systems targeting 32GB total in a single slot — or a foundation for a future 64GB dual-channel configuration — the 32GB variant is the appropriate choice. For 32GB dual-channel configurations, two JM4800ALE-16G sticks may provide better memory bus utilisation depending on the specific platform.

Performance Profile

The JM4800ALE-32G runs at DDR5-4800 (PC5-38400) with CL40 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. Operating temperature is 0°C to 85°C, consistent with the 16GB JetRam DDR5 variant.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

DDR5 Platform Requirements & Capacity Verification

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required. At 32GB single-module capacity, it is essential to verify your motherboard’s maximum per-slot memory capacity before purchasing — not all DDR5 motherboards support 32GB single modules. Consult your motherboard’s specifications or QVL before ordering.

Verify 32GB per-slot support: Not all DDR5 motherboards support 32GB single modules. Check your motherboard’s specifications or QVL before purchasing.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth, install a second JM4800ALE-32G in your motherboard’s recommended paired DIMM slots — enabling 64GB dual-channel. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 32GB (1×32GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40
• Rank / IC: 2Rx8 dual rank, (2Gx8)×8
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• Dual Subchannel: Yes — two independent 32-bit channels
• DRAM: ETT grade, brand-name chips
• PCB Height: 1.23 inches
• Operating Temp: 0°C to 85°C
• RGB: None
• ECC: Non-ECC unbuffered
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The GAVSW516GB6000C38BSC and GAVSW516GB6000C36CSC are both 16GB single-stick Glacier White Orion V RGB DDR5-6000 modules. The practical distinction is the primary latency: CL38 here vs CL36 on the higher-spec variant. Both run at DDR5-6000 and deliver the same raw bandwidth — the tighter CL36 module achieves marginally lower absolute memory access latency in nanoseconds, which translates to small but measurable gains in latency-sensitive workloads such as gaming frame time consistency and competitive esports titles. For most productivity, content creation, and everyday gaming workloads, the real-world performance difference between CL36 and CL38 at DDR5-6000 is negligible. The CL38 variant is the practical choice for white-build buyers where maximum latency tightness isn’t the priority.

Design & RGB Lighting

The Orion V RGB’s visual identity is identical across both white variants. The sci-fi inspired design features dual-gradient triangle patterns along its sleek aluminium heat spreaders, coupled with a honeycomb LED top bar that diffuses customisable lighting effects. Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, and BIOSTAR Advanced VIVID LED DJ control software, users can easily synchronise the lighting effects based on their motherboard brand.

Performance & Dual-Platform Overclocking

Backed by Intel XMP 3.0 and AMD EXPO one-click overclocking support, optimising your rig’s memory settings is effortless and secure. The module runs at DDR5-6000 CL38 at 1.45V via XMP 3.0 or AMD EXPO, defaulting to JEDEC DDR5-4800 CL40 at 1.1V without a profile enabled. Both Intel and AMD DDR5 platforms are fully supported, making this one of the more platform-agnostic DDR5-6000 single-stick options in this range.

XMP 3.0 or AMD EXPO must be enabled for rated speed: Without activating XMP 3.0 (Intel) or EXPO (AMD) in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable the appropriate profile to unlock DDR5-6000 at CL38. Updating your BIOS before installation is strongly recommended.

1.45V is normal at DDR5-6000 under XMP/EXPO: Elevated operating voltage is expected and within safe DDR5 parameters for this speed grade.

DDR5 Platform Features & Requirements

Equipped with an on-die ECC mechanism, the Orion V RGB series guarantees secure and reliable data, while the included PMIC regulates system load, enhances signal integrity, and improves compatibility. DDR5 is not compatible with DDR4 motherboards or slots — verify your motherboard and CPU support DDR5 before purchasing.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth and a symmetrical white RGB look, install a second GAVSW516GB6000C38BSC in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0 / AMD EXPO
• Timings: CL38 (XMP/EXPO); JEDEC default at DDR5-4800 CL40
• Voltage: 1.45V (XMP/EXPO) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes
• Dual Subchannel: Yes
• RGB: Yes — honeycomb LED top bar with triangle pattern heat spreader
• Heat Spreader: Aluminium, Glacier White
• RGB Software: ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, BIOSTAR VIVID LED DJ compatible
• Colour: Glacier White
• Working Temp: 0°C to 70°C
• Dimensions: 13.9 × 3.8 × 0.8cm
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime
• Part Number: GAVSW516GB6000C38BSC

Proudly sold by the Ringwood Digital Store.