The Taichi line is ASRock’s highest-tier graphics card product family — above the Steel Legend, above the Challenger, above everything else in their range. The Taichi is designed to visually and technically complement ASRock’s flagship Taichi and Taichi OCF motherboards based on Intel Z890 and AMD X870E chipsets, making it the natural centrepiece for a high-end coordinated build. Where the Steel Legend is a well-built reference-clocked card, the Taichi is factory overclocked, more aggressively cooled, more capable on power delivery, and equipped with features the Steel Legend simply doesn’t have — Dual BIOS, a single modern 12V-2×6 connector, a 16-phase SPS power stage, and three equal 100mm fans rather than the Steel Legend’s smaller array.

3100 MHz — The Highest Factory OC in Our RX 9070 XT Range

The Taichi OC carries a factory boost clock of 3100 MHz and a game clock of 2570 MHz — the highest out-of-box clock speed of any RX 9070 XT we stock, sitting 130 MHz above AMD’s reference boost and 50 MHz above the Gigabyte Gaming OC’s 3060 MHz. That headroom comes from the 16-phase Smart Power Stage (SPS) power delivery — a design that distributes load evenly across more phases for lower per-phase thermal stress, cleaner voltage regulation, and a more stable platform for sustained high clocks and manual overclocking. The full RDNA 4 feature set is onboard: 64 compute units, 4096 stream processors, 3rd-generation RT accelerators, 2nd-generation AI accelerators, FSR 4, HYPR-RX, Fluid Motion Frames, Anti-Lag 2, and hardware AV1 encoding, all on 16GB of GDDR6 at 20 Gbps across a 256-bit bus for 640 GB/s of bandwidth.

Taichi 3X Cooling — Three 100mm Fans, Reverse Spin, 0dB

Most triple-fan GPU coolers use a smaller centre fan with larger outer fans, or vary the blade geometry between positions. The Taichi uses three equal 100mm Striped Ring fans — matched in diameter across all three positions for consistent airflow across the full heatsink surface. The centre fan runs in reverse spin relative to the outer two, reducing inter-fan turbulence and improving static pressure distribution. TechPowerUp’s review specifically highlighted the Taichi OC’s cooling as excellent — a card running the highest clocks in its class should be running the most capable cooler, and the Taichi delivers on that. 0dB silent mode stops all fans completely under light load, and the fans spin up progressively as temperature climbs. A stylish metal backplate and reinforced card structure manage the 330mm length and 1554g weight — the heaviest card in our range, and one that ships with a graphics card stand included.

12V-2×6 Single Connector, Dual BIOS, Polychrome SYNC

The Taichi replaces the multiple 8-pin connectors seen on other RX 9070 XT models with a single 12V-2×6 pin connector — the modern GPU power standard that reduces cable clutter to a single tidy run from PSU to card. A 16-pin to 3×8-pin adapter cable is included for compatibility with PSUs that don’t yet carry native 12V-2×6 outputs. The physical Dual BIOS switch toggles between Performance and Silent profiles without software. Polychrome SYNC ARGB covers the fan hubs and shroud accents, synchronisable with ASRock Taichi and compatible motherboards via Polychrome SYNC software. An on-card RGB toggle switch kills lighting entirely without software for builds where lighting isn’t wanted.

PSU connector note: The Taichi uses a single 12V-2×6 (16-pin) power connector. A 16-pin to 3×8-pin adapter cable is included in the box for use with standard PSUs. For optimal power delivery and to avoid adapter-related power instability, a PSU with a native 12V-2×6 output is recommended.

PSU requirement: 850W minimum from a reputable manufacturer. At 3100 MHz factory OC, this card draws meaningfully more power than reference — a quality 850W unit is not optional.

Case clearance: At 330mm length, 61mm (3-slot) width, and 1554g, this is the largest and heaviest GPU in our range. Verify your case’s GPU clearance, slot support, and bracket strength before purchasing. A graphics card stand is included.

RGB software note: Full Polychrome SYNC control requires ASRock software. An on-card hardware toggle disables lighting entirely without software. OpenRGB support for this card’s lighting is limited — check current OpenRGB compatibility before purchasing if third-party RGB control is a requirement.

Specs at a Glance

• GPU: AMD Radeon RX 9070 XT (RDNA 4, Navi 48, 4nm)
• Compute Units: 64 | Stream Processors: 4096
• Boost Clock (OC): Up to 3100 MHz | Game Clock: 2570 MHz
• Memory: 16GB GDDR6, 256-bit, 20 Gbps | Bandwidth: 640 GB/s
• Power Delivery: 16-phase Smart Power Stage (SPS)
• Outputs: 3× DisplayPort 2.1a, 1× HDMI 2.1b (4 displays max)
• Power Connector: 1× 12V-2×6 pin (adapter included) | Recommended PSU: 850W
• Dimensions: 330 × 140 × 61mm (3-slot) | Weight: 1554g
• PCIe: 5.0 x16 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: Dual BIOS (Performance/Silent), 0dB mode, Polychrome SYNC ARGB, RGB toggle switch, graphics card stand included, 16-pin to 3×8-pin adapter included

Proudly sold by the Ringwood Digital Store.

The AORUS Elite sits at the top of Gigabyte’s RX 9070 XT lineup, a clear step above the Gaming OC in cooling hardware, build quality, feature set, and warranty coverage. Where the Gaming OC uses a copper plate heatsink, the AORUS Elite uses a large vapour chamber — a higher-end thermal solution that spreads heat across the full heatsink surface simultaneously rather than relying on heatpipes to carry it progressively. Both cards share the same 3100 MHz factory boost clock ceiling, but the Elite sustains it more comfortably under prolonged load thanks to the more capable thermal foundation. Gigabyte backs the AORUS Elite with a 4-year warranty on online registration — the longest coverage of any RX 9070 XT in our range.

3100 MHz Factory OC — and Likely More in Practice

The AORUS Elite is factory overclocked to 3100 MHz boost and 2570 MHz game clock — 130 MHz above AMD’s reference boost and tied with the ASRock Taichi for the highest factory OC of any RX 9070 XT we stock. Real-world owner testing reports actual boost clocks reaching 3150 MHz out of the box, with hotspot temperatures remaining below 65°C under gaming load using a conservative fan curve where fans barely spin above 1000 RPM under typical conditions. There’s strong evidence from 3DMark leaderboard data that AORUS cards benefit from particularly aggressive silicon binning — Gigabyte AORUS models are significantly overrepresented in the top 10 Time Spy, Port Royal, and Steel Nomad scores for this GPU tier, which suggests the silicon selected for the AORUS line is consistently better quality than average. For overclockers and benchmark enthusiasts, that’s a meaningful differentiator beyond the spec sheet.

Vapour Chamber, Hawk Fans, Server-Grade Thermal Gel

The WINDFORCE cooling system on the AORUS Elite combines a large vapour chamber, Hawk fans with alternate spin directions, composite copper heatpipes, server-grade thermal conductive gel, 3D active fan mode, and screen cooling. The Hawk fan blade design — aerodynamics derived from eagle wing profiles — delivers higher static pressure and airflow volume at equivalent noise levels compared to conventional fan designs. Server-grade thermal gel at the GPU die interface provides superior long-term thermal stability over standard paste. 3D active fan mode stops all fans entirely under light load. The result is one of the quietest and coolest-running RX 9070 XT designs available at this clock speed.

RGB Halo, Dual BIOS, Versatile VGA Holder

RGB Halo lighting runs around the fan shroud and AORUS logo, controllable via GIGABYTE Control Center (GCC) with full colour and effect customisation. The physical Dual BIOS switch toggles between Performance and Silent profiles without software. A reinforced card structure manages the 339mm length and triple-slot footprint, and a versatile VGA holder is included in the box to support the card’s weight in the PCIe slot. GCC handles overclocking, fan curves, RGB, and real-time system monitoring from a single interface.

PSU requirement: Three 8-pin PCIe connectors and a genuine 850W PSU are required. Confirm your PSU has three available 8-pin PCIe outputs before purchasing. A quality unit from a reputable manufacturer is strongly recommended at this power level.

Output layout: 2× DisplayPort 2.1a and 2× HDMI 2.1b — a 2+2 split. If your multi-monitor setup requires three DisplayPort outputs, consider the ASRock Steel Legend or Taichi which carry a 3+1 layout.

Case clearance: At 339mm in length and 3 slots wide, this is among the largest cards in our RX 9070 XT range. Verify GPU clearance in your case before purchasing, particularly in mATX builds.

4-year warranty: Requires online registration with Gigabyte. Standard warranty applies without registration — register at time of purchase to secure the full coverage period.

Specs at a Glance

• GPU: AMD Radeon RX 9070 XT (RDNA 4, Navi 48, 4nm)
• Compute Units: 64 | Stream Processors: 4096
• Boost Clock (OC): Up to 3100 MHz | Game Clock: Up to 2570 MHz
• Memory: 16GB GDDR6, 256-bit, 20 Gbps | Bandwidth: 640 GB/s
• Cooling: Vapour chamber + WINDFORCE Hawk triple-fan + server-grade thermal gel
• Outputs: 2× DisplayPort 2.1a, 2× HDMI 2.1b (4 displays max)
• Power Connectors: 3× 8-pin PCIe | Recommended PSU: 850W
• Dimensions: 339 × 136 × 59mm (3-slot)
• PCIe: 5.0 | DirectX: 12 Ultimate | OpenGL: 4.6
• Warranty: 4 years (online registration required)
• Includes: VGA holder, AORUS metal sticker, warranty registration card
• Features: Dual BIOS (Performance/Silent), RGB Halo, FSR 4, HYPR-RX, Fluid Motion Frames, AV1 encoding

Proudly sold by the Ringwood Digital Store.

The TUF Gaming is ASUS’s highest-tier Radeon RX 9070 XT offering, sitting above the Prime in build quality, cooling capability, and feature set. The full Navi 48 die runs at 64 compute units and 4096 stream processors — the complete RDNA 4 package, with 3rd-generation RT accelerators delivering approximately 2× the ray intersection performance of RDNA 3, and 2nd-generation AI accelerators enabling FSR 4’s machine-learning upscaling. The factory OC pushes the boost clock to 3080 MHz in OC mode and 3060 MHz in Default mode — both meaningfully above AMD’s reference 2970 MHz, with game clocks of 2540 MHz and 2520 MHz respectively. This places the TUF XT between the Prime XT (3030 MHz) and the ASRock Taichi OC (3100 MHz) in our range. FSR 4, HYPR-RX, Fluid Motion Frames, Anti-Lag 2, and hardware AV1 encoding are fully supported.

The Strongest Cooler in Its Class

TechPowerUp confirmed the ASUS TUF Gaming RX 9070 XT OC as the most powerful cooler of all RX 9070 XT cards they tested, with excellent noise levels on the quiet BIOS. The cooling stack builds on every element from the non-XT TUF: MaxContact expands the heat spreader surface area by 5% for up to 2°C temperature improvement at the die interface, paired with a phase-change GPU thermal pad that liquefies at operating temperature for near-perfect contact. Three Axial-tech fans spin on dual ball bearings delivering up to 31% more airflow than standard fans, with the two outer fans counterclockwise to reduce turbulence. The vented exoskeleton — a diecast aluminium shroud and aluminium backplate with large cutouts — actively channels heat out of the card rather than trapping it. All fans stop below 55°C and resume above 60°C on a thermal curve tuned for balanced acoustics.

Military-Grade Components, Conformal Coating, Auto-Extreme

TUF chokes and MOSFETs are certified military-grade, backed by TUF 5K black metallic capacitors offering 52% wider temperature tolerance and 2.5× longer operational lifespan than standard capacitors. The entire PCB is coated with a conformal protective layer against moisture, dust, debris, vibration, and humidity — a meaningful differentiator for South African coastal and industrial environments where standard PCBs are more vulnerable. Auto-Extreme automated single-pass soldering reduces thermal strain on components during manufacturing and eliminates harsh cleaning chemicals, resulting in more consistent joint quality across production runs. GPU Guard adhesive corner protection and a GPU bracket ensure uniform PCIe slot mounting pressure and reduce PCB crack risk under the card’s weight.

Dual BIOS, Aura Sync ARGB, What’s in the Box

A Performance/Quiet BIOS mode switch on the card edge toggles between the two fan profiles, with the quiet profile meaningfully reducing fan speeds at the cost of slightly higher temperatures — consistent with what we saw on the non-XT TUF. Aura Sync ARGB covers the shroud and is synchronisable with other Aura Sync-compatible ASUS components via GPU Tweak III. The box includes a TUF Certificate of Reliability, TUF Gaming card holder, TUF velcro hook and loop, TUF fridge magnet, and speed setup manual — more comprehensive than the Prime’s bare-minimum accessory bundle.

PSU requirement: Three 8-pin PCIe connectors and a genuine 850W PSU are required — one more connector and 100W more than the non-XT TUF RX 9070. Confirm your PSU has three available 8-pin outputs before purchasing.

Coil whine: Some review units exhibited coil whine under certain gaming workloads. This varies between individual units and is typically less noticeable with headphones.

Case clearance: 330 × 140 × 62.5mm at 3.125 slots — verify GPU clearance in your case, particularly in mATX and compact mid-tower builds. A TUF Gaming card holder is included for anti-sag support.

vs TUF RX 9070 (non-XT): The XT adds 8 CUs (3584 → 4096 SPs), a third 8-pin connector, an 850W PSU requirement (vs 750W), and higher clock targets. The physical build, dimensions, and cooling stack are identical. Choose based on your target resolution and power delivery headroom.

vs Prime RX 9070 XT: The TUF adds military-grade components, MaxContact, conformal PCB coating, Auto-Extreme manufacturing, GPU Guard, Aura Sync ARGB, a higher factory OC (3080 vs 3030 MHz), and a larger 3.125-slot cooler vs the Prime’s compact 2.5-slot design.

Specs at a Glance

• GPU: AMD Radeon RX 9070 XT (RDNA 4, Navi 48, 4nm)
• Compute Units: 64 | Stream Processors: 4096
• Boost Clock (OC mode): Up to 3080 MHz | Game Clock: 2540 MHz
• Boost Clock (Default mode): Up to 3060 MHz | Game Clock: 2520 MHz
• Memory: 16GB GDDR6, 256-bit, 20 Gbps | Bandwidth: 640 GB/s
• Outputs: 3× DisplayPort 2.1a, 1× HDMI 2.1b (4 displays max)
• Power Connectors: 3× 8-pin PCIe | Recommended PSU: 850W
• Dimensions: 330 × 140 × 62.5mm (3.125 slots)
• PCIe: 5.0 x16 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: Dual BIOS (P/Q mode), Aura Sync ARGB, MaxContact, phase-change thermal pad, Axial-tech fans, dual ball bearings, vented exoskeleton, conformal PCB coating, military-grade components, GPU Guard, TUF card holder included, FSR 4, HYPR-RX, Fluid Motion Frames, Anti-Lag 2, AV1 encoding

Proudly sold by the Ringwood Digital Store.