The CC560 MESH V2 steps up from the standard CC560 V2 with an upgraded fine mesh front panel that opens up intake airflow significantly over the original slotted design. The mesh allows cool air to pass freely into the chassis across all three front-mounted fans, keeping intake resistance low and temperatures in check. A large mesh top panel reinforces the ventilation strategy, ensuring warm air has multiple exit paths. A magnetic top dust filter handles maintenance without tools — lift, tap, replace. It’s a chassis that takes airflow seriously from every angle without requiring any configuration effort from the builder.

Four ARGB Fans, PSU Shroud Support, One Button Control

Four 120mm ARGB fans come pre-installed straight out of the box — three at the front for intake and one at the rear for exhaust — covering the primary airflow positions from the first boot. The fans are PWM-capable for speed control and ARGB-enabled for motherboard lighting sync. An LED control button on the front I/O lets you cycle through preset lighting effects independently if your motherboard doesn’t have an ARGB header. A standout V2 upgrade over the original CC560 is PSU shroud fan support — two additional 120mm fans can be mounted on the shroud to push fresh air directly across a power-hungry GPU, a meaningful thermal benefit for higher-wattage builds. Total fan support tops out at 8× 120mm or 5× 140mm simultaneously.

Broad Compatibility and Practical Storage

The CC560 MESH V2 comfortably accommodates the full spectrum of mainstream build configurations. E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards all fit, and GPU clearance extends to 370mm — enough headroom for most current-generation cards including high-end AIB models. CPU tower coolers up to 165mm tall are supported, and PSUs up to 170mm in length fit without HDD tray removal. Storage is handled with two 3.5″ HDD bays (one of which can be converted to a 2.5″ SSD bay) and two dedicated 2.5″ SSD mounting positions on the motherboard backplate. Cable management clearance sits at 20mm behind the tray — tight but functional, and the reinforced chassis and glass panel give the build a more premium feel than the price suggests.

Front I/O Note: The CC560 MESH V2 provides one USB 3.0 and one USB 2.0 port on the front panel. If your workflow relies on multiple front USB 3.0 connections simultaneously, factor this in against higher-tier options.

GPU Clearance Note: With the 370mm GPU length limit, the vast majority of current-gen cards fit comfortably. If you’re running a particularly long flagship card, verify the exact length of your specific AIB model before building.

Key Highlights

• Form Factor: Mid Tower (E-ATX / ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 370mm
• CPU Cooler Clearance: Up to 165mm
• Max PSU Length: Up to 170mm
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm or 5× 140mm simultaneously
• PSU Shroud Fan Support: 2× 120mm (additional)
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Top: 120 / 140 / 240mm | Rear: 120mm
• Drive Bays: 2× 3.5″ HDD (1 convertible to 2.5″), 2× 2.5″ SSD (backplate mounted)
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 1× USB 2.0, HD Audio Combo Jack, LED Control
• Side Panel: Reinforced Tempered Glass
• Top Dust Filter: Magnetic, tool-free
• Cable Management: 20mm rear clearance
• Dimensions: 432 × 215 × 483mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The NX292 ARGB keeps things functional with a mesh front panel designed to allow steady intake airflow across the three front-mounted fans. Unlike premium cases with sculpted or geometric mesh patterns, the NX292’s front is clean and understated — well suited to a build that prioritises performance over visual drama. Top and bottom dust filters are included as standard, managing dust ingress without requiring tool-free magnetic setups. It’s a no-nonsense airflow design that covers the bases cleanly.

Four ARGB Fans, Pre-Installed and Ready

The ARGB variant of the NX292 ships with four 120mm ARGB fans pre-installed — three handling front intake and one at the rear for exhaust — giving the build solid thermal coverage from the first power-on. An LED control button on the front I/O panel lets you toggle lighting effects without any software dependency. The chassis supports up to eight fans simultaneously, with additional mounting positions available at the top and PSU shroud for builders who want to push cooling further down the line.

Hardware Compatibility and Build Essentials

The NX292 ARGB supports a wider motherboard range than most cases in its class, accommodating E-ATX, ATX, Micro-ATX, and Mini-ITX boards. Front radiator support goes up to 360mm, making it compatible with standard 240mm and 360mm AIO coolers despite its budget positioning. Storage is handled with two 3.5″/2.5″ combo bays and two dedicated 2.5″ SSD bays across seven expansion slots. PSU length maxes out at 165mm with the HDD tray in place — a tighter limit than pricier mid-towers — but extends to 300mm once the tray is removed.

GPU Length Note: Maximum GPU clearance is 320mm. Most mainstream and mid-range cards fall within this limit, but verify your card’s length before building — some higher-end triple-slot models exceed this figure and will not fit without modification.

PSU Length Note: With the HDD tray installed, PSU length is capped at 165mm. Longer PSUs require removing the HDD tray entirely. Check your PSU dimensions against this limit before committing to a build configuration.

Front I/O Note: The NX292 ARGB provides one USB 3.0 port and two USB 2.0 ports on the front panel. If your workflow relies on multiple front USB 3.0 connections, factor this in when comparing to higher-tier options.

Key Highlights

• Form Factor: Mid Tower (E-ATX / ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 320mm
• CPU Cooler Clearance: Up to 155mm
• Max PSU Length: Up to 165mm (with HDD tray) / Up to 300mm (without)
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× simultaneously
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Rear: 120mm (≤156mm length)
• Drive Bays: 2× 3.5″/2.5″ combo (1 convertible), 2× 2.5″ dedicated
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 2× USB 2.0, Headphone/Mic Combo Jack, LED Control, Reset
• Side Panel: Tempered Glass
• Dust Filters: Top and Bottom
• Materials: Steel + Plastic
• Dimensions: 406 × 206 × 450mm (D × W × H)
• Net Weight: 4.5kg
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The AX85 sets itself apart with a ripple-patterned mesh front panel that goes beyond purely functional airflow design — the wave motif gives it a distinctive look without the bulk of a solid or glass front. Functionally, the large-area mesh allows cool air to pass into the chassis freely, feeding the three front-mounted intake fans without restriction. Dual dust filters — a magnetic unit on top and a flat filter at the bottom — make maintenance straightforward without tools, keeping intake quality high over time. It’s a front panel that holds its own aesthetically while never compromising on what matters.

Four ARGB Fans, Daisy-Chain Ready

Four 120mm ARGB fans come pre-installed out of the box — three at the front handling intake and one at the rear for exhaust — covering the primary airflow positions immediately. The front fans support daisy-chain synchronisation, letting you link them together via the lead fan and keep the ARGB cabling manageable. An onboard LED control button on the front I/O panel lets you cycle through lighting effects or switch them off without needing software. The chassis supports up to eight 120mm fans simultaneously, leaving space to add top or PSU shroud fans as the build demands.

Generous Hardware Clearances and Cooling Flexibility

The AX85 is built to accommodate serious hardware. GPUs up to 340mm fit comfortably with all front fans installed; remove the front fan bracket and that ceiling rises to 370mm, opening the door to high-end triple-slot cards. CPU tower coolers up to 160mm tall are supported, and the front panel takes radiators up to 360mm — making 240mm and 360mm AIO liquid coolers a straightforward fit. Storage is well covered with two 3.5″/2.5″ combo bays and two dedicated 2.5″ SSD bays. Cable management sits at 23mm behind the motherboard tray — tight but workable for a neat finish.

GPU Length Note: The 370mm GPU clearance figure applies only with the front fan bracket removed. With all three front fans installed, maximum GPU length is 340mm. Measure your card before building — most current-gen cards fall well within the 340mm limit, but flagship models can push longer.

PSU Length Note: Check the official Antec spec sheet for your specific PSU length limit with the HDD tray in place, as longer PSUs may require repositioning or removing the tray for a proper fit.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 340mm (with front fans) / Up to 370mm (without front fans)
• CPU Cooler Clearance: Up to 160mm
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Radiator Support: Front: 120 / 140 / 240 / 280 / 360mm | Top: 120 / 240mm | Rear: 120mm
• Drive Bays: 2× 3.5″/2.5″ combo, 2× 2.5″ dedicated
• Expansion Slots: 7
• Front I/O: 2× USB 3.0, Headphone/Mic Combo Jack, LED Control Button
• Side Panel: 4mm Tempered Glass
• Dust Filters: Magnetic (top), flat filter (bottom)
• Cable Management: 23mm rear clearance
• Materials: Steel + Plastic
• Dimensions: 393 × 205 × 485mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.

The AX61’s front panel leads with purpose — a bold geometric mesh design that’s as functional as it is distinctive. Unlike solid or tempered glass fronts that restrict airflow, the high-density mesh allows cool air to flow freely into the chassis, feeding the pre-installed fans and keeping intake temperatures low. Combined with bottom air intakes, the AX61 establishes strong all-round airflow paths that support sustained performance during demanding gaming sessions. It’s a front panel that looks the part without compromising what matters most.

Four Pre-Installed ARGB Fans with Daisy-Chain Sync

Out of the box, the AX61 comes with four 120mm ARGB fans — three mounted at the front and one at the rear — covering the most critical airflow positions immediately. All four fans support ARGB lighting synchronisation with your motherboard, and the daisy-chain design allows you to link the front fans together via the main fan, keeping cable runs clean. The case supports up to eight 120mm fans simultaneously, leaving room to expand cooling capacity as your build grows.

Serious Radiator and Hardware Clearance

Despite sitting in the accessible end of the market, the AX61 doesn’t shortchange you on cooling potential. The front panel supports radiators up to 360mm, making it compatible with most 240mm and 360mm AIO liquid coolers for builders who want to go beyond air cooling. CPU coolers up to 160mm tall are supported, covering the majority of high-end tower air coolers, while GPUs up to 320mm in length fit without issue. Cable management is addressed with 24mm of clearance on the left side and 13mm on the right, keeping the interior tidy once the build is complete.

Buyer Tip: The HDD cage can interfere with longer PSUs (160mm or more in cable length). If your power supply is on the longer side, the HDD cage may need to be repositioned toward the front of the case or removed entirely to ensure a proper fit. Check your PSU dimensions before building.

Note: The ARGB fans are SATA-powered and connect to the motherboard via a SATA cable for lighting control. Ensure your motherboard has an available SATA port and ARGB header, or use the onboard LED control button on the front I/O panel to cycle lighting effects independently.

Key Highlights

• Form Factor: Mid Tower (ATX / Micro-ATX / Mini-ITX)
• GPU Clearance: Up to 320mm
• CPU Cooler Clearance: Up to 160mm
• Max PSU Length: Up to 165mm (with HDD cage) / 345mm (without)
• Pre-Installed Fans: 4× 120mm ARGB (3 Front, 1 Rear)
• Max Fan Support: Up to 8× 120mm simultaneously
• Radiator Support: Front: 120 / 240 / 360mm | Top: 120 / 240mm
• Drive Bays: 2× 3.5″, 2× 2.5″
• Expansion Slots: 7
• Front I/O: 1× USB 3.0, 2× USB 2.0, HD Audio/Mic, LED Control
• Side Panel: Tempered Glass
• Dimensions: 405 × 200 × 449mm (D × W × H)
• PSU: Not included (standard ATX)
• Colour: Black

Proudly sold by the Ringwood Digital Store.