The RX 7600 sits on AMD’s 6nm RDNA 3 architecture with 2048 stream processors and a factory boost clock pushed to 2755 MHz — 100 MHz ahead of the reference design. Real-world 1080p gaming is the sweet spot: think high-refresh competitive titles and smooth performance across most modern AAA games at high settings. AMD FidelityFX Super Resolution (FSR) support gives you an extra frame-rate headroom lever when you need it.

WINDFORCE Triple-Fan Cooling

Gigabyte fits three 80mm WINDFORCE fans with alternating spin directions — the outer two run anticlockwise, the middle clockwise — which reduces turbulence and improves static pressure across the heatsink. Five composite copper heatpipes make direct GPU contact, and a full-length metal backplate adds rigidity and keeps temps on the back of the PCB in check. The fans also stop entirely under light load for silent desktop use.

Connectivity and Display Output

The card carries two HDMI 2.1 and two DisplayPort 2.1 outputs, supporting up to four monitors simultaneously at resolutions up to 7680×4320. A single 8-pin PCIe power connector keeps cabling tidy, and Gigabyte includes a connector-seating LED indicator that lights up if the plug isn’t fully seated — a small but genuinely useful touch. Minimum recommended PSU is 550W.

Heads up: The 8GB VRAM on a 128-bit bus can be a limitation at 1440p in VRAM-heavy titles. This card is optimised for 1080p — if 1440p is your primary target, consider stepping up to the RX 7700 XT.

Specs at a Glance

• GPU: AMD Radeon RX 7600 (RDNA 3, 6nm)
• Stream Processors: 2048
• Boost Clock: Up to 2755 MHz
• Memory: 8GB GDDR6, 128-bit, 18 Gbps
• Memory Bandwidth: 288 GB/s
• TDP: 165W | Power Connector: 1× 8-pin PCIe
• Outputs: 2× HDMI 2.1, 2× DisplayPort 2.1
• Card Dimensions: 282 × 115 × 50mm (2.5 slots)
• DirectX: 12 Ultimate | PCIe 4.

Proudly sold by the Ringwood Digital Store.

The RX 7600 XT is AMD’s answer to the 8GB VRAM wall that limits the standard RX 7600 in modern titles — same Navi 33 RDNA 3 silicon, same 2048 stream processors and 32 compute units, but with 16GB of GDDR6 running at 18 Gbps over a 128-bit bus. Gigabyte’s factory OC pushes the boost clock to 2810 MHz and game clock to 2539 MHz, both well above AMD’s reference figures of 2755 MHz and 2470 MHz respectively. At 1080p, the 7600 XT handles demanding titles at high to ultra settings with headroom to spare, and 1440p becomes genuinely accessible with FSR 3 upscaling applied. AMD HYPR-RX, AV1 hardware encoding, DisplayPort 2.1, and AI accelerators are all part of the RDNA 3 feature set — future-proofing the card beyond its primary resolution target.

WINDFORCE 3X — 80mm Triple Fans, Graphene Lubricant

The WINDFORCE 3X cooler uses three 80mm fans with a striped blade texture, with the centre fan spinning in the opposite direction to the outer two to reduce inter-fan turbulence and improve airflow consistency across the heatsink. Composite copper heatpipes make direct contact with the GPU die, and graphene nano lubricant in the fan bearings significantly extends bearing lifespan over conventional lubricant — approaching the durability of dual ball bearings while running quietly. 3D active fan mode stops all fans under low load for silent desktop use. A full-length metal backplate protects the PCB and adds structural rigidity.

DisplayPort 2.1, RGB Fusion 2.0, Single 8-pin

DisplayPort 2.1 with UHBR 13.5 support delivers up to 54 Gb/s of display bandwidth, enabling high-refresh 4K (up to 480 Hz) or 8K (up to 165 Hz) on compatible next-gen displays — output capability that substantially exceeds what this card will ever stress in gameplay, but future-proofs your monitor compatibility. Output layout covers 2× HDMI 2.1a and 2× DisplayPort 2.1 for up to four simultaneous displays. RGB Fusion 2.0 covers the Gigabyte logo for lighting customisation via GIGABYTE Control Center. A single 8-pin PCIe connector handles power delivery with a 550W PSU recommendation — neat cabling for a triple-fan card.

128-bit memory bus: Despite the 16GB VRAM, the 128-bit bus limits raw memory bandwidth. This card is optimised for 1080p — 1440p is achievable especially with FSR, but 4K is not this card’s target resolution.

vs ASUS Dual RX 7600 XT EVO: The Gigabyte Gaming OC carries a higher factory boost clock (2810 MHz vs 2715 MHz) and a triple-fan WINDFORCE cooler vs the ASUS Dual’s two-fan design — better thermal headroom for sustained OC workloads. Both carry 16GB GDDR6 on the same 128-bit bus.

Specs at a Glance

• GPU: AMD Radeon RX 7600 XT (RDNA 3, Navi 33, 6nm)
• Compute Units: 32 | Stream Processors: 2048
• Boost Clock (OC): Up to 2810 MHz | Game Clock: Up to 2539 MHz
• Memory: 16GB GDDR6, 128-bit, 18 Gbps
• Outputs: 2× HDMI 2.1a, 2× DisplayPort 2.1 (4 displays max)
• Power Connector: 1× 8-pin PCIe | Recommended PSU: 550W
• PCIe: 4.0 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: WINDFORCE 3X, graphene lubricant, RGB Fusion 2.0, 3D active fan, metal backplate, HYPR-RX, FSR, AV1 encoding

Proudly sold by the Ringwood Digital Store.

Built on AMD’s 7nm RDNA 2 architecture, the RX 6700 XT brings 40 compute units (2560 stream processors) and AMD’s Infinity Cache — a 96MB on-die cache that effectively boosts memory bandwidth well beyond what the 192-bit bus alone would suggest, allowing the card to punch significantly above its memory interface width in real-world gaming workloads. At 1440p across a wide range of titles, the RX 6700 XT remains a competitive performer, and the 12GB GDDR6 frame buffer running at 16 Gbps gives it more VRAM than many newer cards at similar price points. DirectX 12 Ultimate support brings hardware ray tracing and variable rate shading to the table, though RT performance reflects the RDNA 2 generation rather than the newer RDNA 3 or 4 hardware.

Axial-Tech Dual Fan Cooling

ASUS equips the Dual with the same Axial-tech fan design used on its flagship cards — smaller fan hubs free up blade length, and a barrier ring around each fan increases downward airflow pressure into the heatsink. Dual ball fan bearings extend fan lifespan significantly over sleeve-bearing designs. The 0dB mode kicks in during light load and desktop use, spinning the fans down completely for silent operation. A full-length metal backplate prevents PCB flex during handling and installation, and Auto-Extreme automated manufacturing keeps soldering quality consistent throughout.

Display Output and Connectivity

The card carries 1× HDMI 2.1 and 3× DisplayPort 1.4a, supporting up to four simultaneous displays at resolutions up to 7680×4320. Power delivery requires a 6-pin and an 8-pin PCIe connector, with a 650W minimum PSU recommendation. The card measures 295mm in length across a 2.7-slot footprint — verify clearance in tighter cases before purchasing. AMD Smart Access Memory (SAM) is supported when paired with a compatible AMD Ryzen 5000 Series or newer platform.

Previous-generation card: The RX 6700 XT is based on RDNA 2 (2021). It does not support FSR 4 or AMD HYPR-RX features introduced with RDNA 4. FSR 1, 2, and 3 are supported. Buyers looking for those newer features should consider an RX 9000 Series card.

Power connector note: This card requires both a 6-pin and an 8-pin PCIe connector. Confirm your PSU has both available before purchasing.

Case clearance: At 295mm and 2.7 slots wide, verify GPU clearance in your case — particularly in mATX and smaller mid-tower builds.

Specs at a Glance

• GPU: AMD Radeon RX 6700 XT (RDNA 2, 7nm)
• Compute Units: 40 | Stream Processors: 2560
• Boost Clock: Up to 2581 MHz | Game Clock: Up to 2424 MHz
• Memory: 12GB GDDR6, 192-bit, 16 Gbps | Infinity Cache: 96MB
• Outputs: 1× HDMI 2.1, 3× DisplayPort 1.4a (4 displays max)
• Power Connectors: 1× 6-pin + 1× 8-pin PCIe | Recommended PSU: 650W
• Dimensions: 295 × 139 × 55mm (2.7 slots)
• PCIe: 4.0 | DirectX: 12 Ultimate | OpenGL: 4.6

Proudly sold by the Ringwood Digital Store.

The RX 9060 XT runs on AMD’s Navi 44 silicon built on TSMC’s 4nm N4P node, and RDNA 4 is not a minor refresh. The 32 compute units now include 3rd-generation RT accelerators — AMD claims a 2× uplift in ray intersection performance over RDNA 3 — and 2nd-generation AI accelerators that enable FSR 4, AMD’s new machine learning-based upscaler that finally competes directly with NVIDIA DLSS in image quality. In independent testing, the RX 9060 XT 16GB showed roughly 54% faster 1080p performance and 63% faster 1440p performance over the RX 7600 — numbers that make RDNA 3 cards at this price point a genuinely harder sell. The factory OC bumps the boost clock to 3275 MHz with a game clock of 2780 MHz, both well above AMD’s reference figures.

Steel Legend Cooling — Triple Fan, 0dB, Super Alloy

The Steel Legend cooler uses ASRock’s Striped Ring Fan design across three fans — a blade geometry optimised to reduce noise while maintaining airflow — backed by Ultra-fit heatpipes that sit flush against the GPU die for efficient heat transfer, and Air Deflecting Fins that channel airflow more precisely through the heatsink stack. 0dB Silent Cooling stops all three fans completely during light use and low-load gaming, and the card won’t spin up until temperatures climb to a threshold that warrants active cooling. Military-grade Super Alloy components throughout the power delivery circuitry are rated for higher temperature tolerances and longer operational life than standard capacitors and chokes. A stylish metal backplate adds rigidity and completes the predominantly white and silver aesthetic.

Polychrome SYNC, 16GB GDDR6, PCIe 5.0

Integrated ARGB LEDs on the fans and along the card’s spine can be customised or synchronised with ASRock motherboards via Polychrome SYNC, giving you full RGB coordination across compatible system components without needing separate software. The 16GB GDDR6 frame buffer runs at 20 Gbps across a 128-bit bus for 320 GB/s of memory bandwidth — meaningfully more than the previous generation’s 288 GB/s — and PCIe 5.0 x16 ensures full slot bandwidth with current AM5 and Intel platforms. Display outputs are 2× DisplayPort 2.1a and 1× HDMI 2.1b, supporting up to three displays at up to 7680×4320. A single 8-pin PCIe connector handles power delivery, with a 550W PSU recommendation.

Display limit: Maximum simultaneous display support is 3, not 4. Plan your multi-monitor setup accordingly.

Ray tracing context: The RX 9060 XT’s RT performance is a major step forward from RDNA 3, but it targets 1080p RT gameplay rather than maxed-out 4K path tracing. Expectations should be set accordingly for RT-heavy titles at 1440p.

Specs at a Glance

• GPU: AMD Radeon RX 9060 XT (RDNA 4, Navi 44, 4nm)
• Compute Units: 32 | Stream Processors: 2048
• Boost Clock (OC): Up to 3275 MHz | Game Clock: 2780 MHz
• Memory: 16GB GDDR6, 128-bit, 20 Gbps | Bandwidth: 320 GB/s
• Outputs: 2× DisplayPort 2.1a, 1× HDMI 2.1b (3 displays max)
• Power Connector: 1× 8-pin PCIe | Recommended PSU: 550W
• PCIe: 5.0 x16 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: FSR 4, HYPR-RX, Fluid Motion Frames, AV1 encoding, Polychrome SYNC ARGB

Proudly sold by the Ringwood Digital Store.

The RX 9060 XT is the first card in its price bracket built on AMD’s RDNA 4 architecture — a meaningful jump rather than a spec bump. The 2048 stream processors now include second-generation AI accelerators and significantly upgraded ray tracing hardware, enabling capabilities that simply weren’t available on RDNA 3 at this price. Gigabyte’s factory OC pushes the boost clock to 3320 MHz, a full 190 MHz above the reference design’s 3130 MHz, with a game clock of up to 2780 MHz. The target is 1440p gaming with genuine headroom, and 1080p at very high refresh rates.

WINDFORCE Cooling — Hawk Fans and Server-Grade Thermal Gel

Gigabyte’s WINDFORCE system gets a notable upgrade here with the new Hawk fan design — blade geometry inspired by eagle wing aerodynamics that Gigabyte claims delivers up to 53.6% more air pressure and 12.5% more air volume over conventional fan designs at the same noise level. The three fans run with alternate spin directions to reduce turbulence, and the heatsink uses composite copper heatpipes with direct GPU contact alongside a full copper baseplate. The standout addition is server-grade thermal conductive gel in place of standard paste — a material more commonly found in data centre hardware, offering improved long-term thermal stability. 3D active fan mode stops the fans entirely under low load.

16GB GDDR6, PCIe 5.0, and a Capable Display Engine

The 16GB GDDR6 frame buffer running at 20 Gbps on a 128-bit bus gives this card a comfortable margin for 1440p and a meaningful buffer for texture-heavy titles moving forward. PCIe 5.0 connectivity ensures full bandwidth headroom with current and next-gen AM5 and Intel platforms. Display output covers 2× DisplayPort 2.1a and 1× HDMI 2.1b — supporting up to three monitors at up to 7680×4320. AMD HYPR-RX, FSR 4, Fluid Motion Frames, and hardware AV1 encoding are all supported. The GIGABYTE Control Center (GCC) software handles overclocking, fan curves, and RGB.

Display limit: This card supports a maximum of 3 simultaneous displays, not 4. Plan your multi-monitor setup accordingly.

PSU note: The 450W recommendation is for a system with this card and a CPU. A quality 550W+ unit is recommended if your build includes a power-hungry CPU or additional drives and peripherals.

Specs at a Glance

• GPU: AMD Radeon RX 9060 XT (RDNA 4)
• Stream Processors: 2048
• Boost Clock (OC): Up to 3320 MHz | Game Clock: Up to 2780 MHz (Ref: 3130 / 2530 MHz)
• Memory: 16GB GDDR6, 128-bit, 20 Gbps
• Outputs: 2× DisplayPort 2.1a, 1× HDMI 2.1b (3 displays max)
• Power Connector: 1× 8-pin PCIe | Recommended PSU: 450W
• Dimensions: 281 × 118 × 40mm
• PCIe: 5.0 | DirectX: 12 Ultimate | OpenGL: 4.6

Proudly sold by the Ringwood Digital Store.

The XT designation brings one significant upgrade over the standard RX 7600: 16GB of GDDR6 memory. On a 128-bit bus running at 18 Gbps, the raw bandwidth figures are the same, but the doubled VRAM pool means modern and upcoming titles have far more breathing room, particularly at 1440p where texture-heavy games can push 8GB cards to their limits. Combined with RDNA 3’s 2048 stream processors and a factory OC boost clock of up to 2801 MHz, this card sits in a practical sweet spot for buyers who want a card that stays relevant for a few more years without paying for a full mid-range upgrade.

Axial-Tech Cooling in a Compact Package

ASUS packs flagship-level cooling engineering into a 227mm, 2.5-slot design. The two Axial-tech fans use a smaller hub to free up blade length, and a barrier ring channels airflow downward into the heatsink more efficiently than open-blade designs. Dual ball fan bearings extend service life significantly over sleeve-bearing alternatives. The 0dB mode brings fans to a full stop below 55°C, with spin-up resuming above 60°C — keeping casual use and light gaming genuinely quiet. A protective metal backplate adds rigidity and protects the PCB during installation and transport.

Connectivity and Display Output

Outputs cover 1× HDMI 2.1 and 3× DisplayPort 2.1, supporting up to four displays at resolutions up to 7680×4320. AMD HYPR-RX, FSR, Fluid Motion Frames, Radeon Anti-Lag, and hardware AV1 encoding round out the feature set — making this a capable streaming and content creation card as well as a gaming one. A Dual BIOS switch lets you toggle between performance and quiet profiles without software. Power delivery is a single 8-pin PCIe connector with a 550W minimum PSU recommendation.

DisplayPort heads up: When two DP 2.1 monitors are connected simultaneously, a third connected display is limited to DisplayPort 1.4 functionality. Plan your multi-monitor setup accordingly.

Bandwidth note: Despite the 16GB VRAM, the 128-bit memory bus is unchanged from the standard RX 7600. Performance at 4K is limited — this card excels at 1080p and handles 1440p well, but isn’t a 4K-primary card.

Specs at a Glance

• GPU: AMD Radeon RX 7600 XT (RDNA 3, 6nm)
• Stream Processors: 2048
• Boost Clock (OC Mode): Up to 2801 MHz | Game Clock: Up to 2513 MHz
• Memory: 16GB GDDR6, 128-bit, 18 Gbps | Bandwidth: 288 GB/s
• Outputs: 1× HDMI 2.1, 3× DisplayPort 2.1 (4 displays max)
• Power Connector: 1× 8-pin PCIe | Recommended PSU: 550W
• Dimensions: 227 × 134 × 49mm (2.5 slots)
• PCIe: 4.0 | DirectX: 12 Ultimate | OpenGL: 4.6

Proudly sold by the Ringwood Digital Store.

The RX 6750 XT shares its Navi 22 silicon and 2560 stream processor count with the RX 6700 XT, but AMD refined the package with faster 18 Gbps GDDR6 memory (up from 16 Gbps), higher reference clocks, and a 250W TDP that gives board partners more thermal headroom for factory overclocking. The result is a card that sits meaningfully above the 6700 XT in sustained workloads, particularly memory-bandwidth-sensitive scenarios at 1440p. Gigabyte’s AORUS Elite treatment pushes the boost clock to 2623 MHz and game clock to 2554 MHz — both ahead of AMD’s reference figures of 2600 MHz and 2495 MHz respectively. The 96MB Infinity Cache remains the architecture’s flagship feature, delivering effective memory bandwidth well beyond what a 192-bit bus alone would suggest.

AORUS Elite — Premium Tier Over Gaming OC

The Elite sits above Gigabyte’s standard Gaming OC line in both build quality and support. The power delivery uses a higher-phase design with improved MOSFET load balancing and over-temperature protection, rated for sustained overclocking without thermal stress. Ultra Durable certified chokes and capacitors extend component lifespan under load. A power indicator LED lights up if the PSU connectors aren’t fully seated — a practical safeguard during builds. AORUS Engine software provides real-time monitoring and tuning of clock speed, voltage, fan curves, and power target. Gigabyte also backs the AORUS Elite with a 4-year warranty upon online registration — a meaningful differentiator for a business or enthusiast buyer who wants long-term coverage.

WINDFORCE 3X Cooling — Graphene Lubricant and Screen Cooling

Three 80mm fans run with alternate spin directions to reduce turbulence, backed by five composite copper heatpipes in direct contact with the GPU die. Graphene nano lubricant in the fan bearings extends fan life by approximately 2.1× over standard lubricant — approaching the durability of dual ball bearings while running quieter. Screen cooling extends the heatsink and airflow path beyond the PCB edge through a gap in the backplate, improving exhaust efficiency at the rear. RGB Fusion 2.0 covers the AORUS logo and fan ring accents with 16.7 million colour options, synchronisable with other AORUS and RGB Fusion-compatible devices.

Previous-generation card: Based on RDNA 2 (2022). FSR 4 and AMD HYPR-RX are not supported — these require RDNA 4 hardware. FSR 1, 2, and 3 are fully supported.

Power and case requirements: 250W TDP with a 700W PSU recommendation. Requires both an 8-pin and a 6-pin PCIe connector. The triple-slot footprint and ~296mm length require verification against your case’s GPU clearance spec.

Output layout: This card carries 2× HDMI 2.1 and 2× DisplayPort 1.4a — confirm your display connector requirements before purchasing.

Specs at a Glance

• GPU: AMD Radeon RX 6750 XT (RDNA 2, Navi 22, 7nm)
• Compute Units: 40 | Stream Processors: 2560 | Infinity Cache: 96MB
• Boost Clock (OC): Up to 2623 MHz | Game Clock: Up to 2554 MHz
• Memory: 12GB GDDR6, 192-bit, 18 Gbps | Bandwidth: 432 GB/s
• Outputs: 2× HDMI 2.1, 2× DisplayPort 1.4a (4 displays max)
• Power Connectors: 1× 8-pin + 1× 6-pin PCIe | TDP: 250W | Recommended PSU: 700W
• Dimensions: ~296mm length | Triple-slot
• PCIe: 4.0 | DirectX: 12 Ultimate | OpenGL: 4.6
• Warranty: 4 years (online registration required)

Proudly sold by the Ringwood Digital Store.

Gigabyte’s Gaming OC treatment pushes the RX 6700 XT’s boost clock to 2622 MHz and game clock to 2514 MHz — meaningfully above AMD’s reference clocks of 2581 MHz and 2321 MHz respectively. The underlying silicon is AMD’s 7nm RDNA 2 architecture: 40 compute units, 2560 stream processors, and 96MB of Infinity Cache that dramatically boosts effective memory bandwidth beyond what the 192-bit bus alone would suggest. At 1440p across mainstream titles, this is still a capable card, and the 12GB GDDR6 frame buffer gives it more headroom than many cards at comparable price points. DirectX 12 Ultimate, hardware ray tracing, variable rate shading, and AMD FidelityFX features (FSR 1, 2, and 3) are all supported.

WINDFORCE 3X — Triple Fans, Graphene Lubricant, Screen Cooling

The WINDFORCE 3X cooler brings three 80mm fans with alternate spin directions — the outer fans spin in one direction, the centre fan in the opposite — reducing turbulence and improving airflow consistency across the full heatsink surface. Five 6mm composite copper heatpipes make direct contact with the GPU die via a copper baseplate. A standout detail is Gigabyte’s use of graphene nano lubricant in the fan bearings — a material with significantly better thermal conductivity and longevity than conventional lubricants, extending bearing life and maintaining fan performance over time. Screen cooling extends airflow beyond the PCB edge through a gap in the backplate, improving exhaust efficiency. The 3D active fan mode stops all three fans under low load for quiet desktop use.

RGB Fusion 2.0, Solid Build, Flexible Output

RGB Fusion 2.0 covers the Gigabyte logo on the shroud, with full colour and effect customisation through Gigabyte’s software. A full-length metal backplate protects the PCB and adds structural rigidity. Display outputs are 2× HDMI 2.1 and 2× DisplayPort 1.4a, supporting up to four simultaneous displays at up to 7680×4320 — a slightly different output split from other RX 6700 XT models worth noting if your display setup depends on a specific connector type. Power delivery requires a 6-pin and an 8-pin PCIe connector, with a 650W PSU recommendation.

Output layout note: This card carries 2× HDMI 2.1 and 2× DisplayPort 1.4a — different from other RX 6700 XT variants that carry 1× HDMI and 3× DisplayPort. Confirm your display connector requirements before purchasing.

Power connector note: Requires both a 6-pin and an 8-pin PCIe connector from your PSU. Confirm availability before purchasing.

Previous-generation card: Based on RDNA 2 (2021). FSR 4 and AMD HYPR-RX are not supported — these require RDNA 4 hardware. FSR 1, 2, and 3 are fully supported.

Case clearance: 2.7-slot width and a full-size triple-fan cooler — verify GPU clearance in mATX and smaller mid-tower builds.

Specs at a Glance

• GPU: AMD Radeon RX 6700 XT (RDNA 2, 7nm)
• Compute Units: 40 | Stream Processors: 2560 | Infinity Cache: 96MB
• Boost Clock (OC): Up to 2622 MHz | Game Clock: Up to 2514 MHz
• Memory: 12GB GDDR6, 192-bit, 16 Gbps
• Outputs: 2× HDMI 2.1, 2× DisplayPort 1.4a (4 displays max)
• Power Connectors: 1× 6-pin + 1× 8-pin PCIe | Recommended PSU: 650W
• Slot Width: 2.7 slots
• PCIe: 4.0 | DirectX: 12 Ultimate | OpenGL: 4.6

Proudly sold by the Ringwood Digital Store.

The RX 9070 sits one step below the 9070 XT in AMD’s lineup but brings a significant upgrade over the 9060 XT: a full 256-bit memory bus, 640 GB/s of memory bandwidth, and 3584 stream processors across 56 compute units built on RDNA 4’s Navi 48 silicon. That wider bus is the key differentiator — at 1440p and 4K, memory bandwidth headroom matters, and the RX 9070 has substantially more of it than any 128-bit card at this price level. The factory OC pushes the boost clock to 2700 MHz and game clock to 2210 MHz — both well above AMD’s reference figures of 2520 MHz and 2070 MHz respectively. RDNA 4’s 2nd-generation AI accelerators and 3rd-generation RT hardware are fully onboard: FSR 4, HYPR-RX, Fluid Motion Frames, AMD Noise Suppression, and hardware AV1 encoding are all supported.

WINDFORCE Cooling — Hawk Fans, Server-Grade Thermal Gel, Dual BIOS

Gigabyte’s WINDFORCE triple-fan system on the 9070 Gaming OC uses the Hawk fan blade design — aerodynamics drawn from eagle wing profiles that Gigabyte says deliver up to 53.6% more air pressure and 12.5% more air volume at equivalent noise levels compared to conventional blade designs. Three fans run with alternate spin directions to reduce turbulence across the heatsink. Server-grade thermal conductive gel replaces standard thermal paste at the GPU die interface, providing superior and more stable long-term thermal conductivity. Composite copper heatpipes, a large copper plate, and screen cooling round out the thermal stack. The 3D active fan mode stops all fans below the thermal threshold for silent desktop and light-load use.

The standout feature for builders is the Dual BIOS switch — a physical toggle on the card that swaps between a Performance BIOS (higher clocks and fan speeds) and a Silent BIOS (lower fan targets, quieter operation) without needing software. A reinforced card structure and full-length metal backplate protect the PCB in larger, heavier triple-fan configurations.

16GB on a 256-Bit Bus, PCIe 5.0, Four Display Outputs

The 16GB GDDR6 frame buffer at 20 Gbps and 640 GB/s effective bandwidth gives this card genuine 4K gaming capability in the right titles, not just 1440p headroom. PCIe 5.0 x16 connectivity ensures full platform bandwidth with AM5 and Intel platforms. Display output covers 2× DisplayPort 2.1a and 2× HDMI 2.1b, supporting up to four simultaneous displays at up to 7680×4320. Power delivery uses 2× 8-pin PCIe connectors — simpler and more common than the 3× 8-pin required by the 9070 XT — with a 750W PSU recommendation. GIGABYTE Control Center (GCC) handles overclocking, fan tuning, RGB, and system monitoring from a single interface.

RX 9070 vs 9070 XT: The 9070 has 56 CUs (3584 SPs) vs the XT’s 64 CUs (4096 SPs), lower clock targets, 2× 8-pin power vs 3× 8-pin, and a 750W PSU requirement vs 850W. Performance is meaningfully lower than the XT — if your budget stretches, the XT is the stronger 4K card.

PSU quality matters: At this power level, a quality 750W unit from a reputable brand is strongly recommended. A low-grade 750W PSU may struggle under sustained GPU and CPU load simultaneously.

Specs at a Glance

• GPU: AMD Radeon RX 9070 (RDNA 4, Navi 48)
• Compute Units: 56 | Stream Processors: 3584
• Boost Clock (OC): Up to 2700 MHz | Game Clock: Up to 2210 MHz
• Memory: 16GB GDDR6, 256-bit, 20 Gbps | Bandwidth: 640 GB/s
• Outputs: 2× DisplayPort 2.1a, 2× HDMI 2.1b (4 displays max)
• Power Connectors: 2× 8-pin PCIe | Recommended PSU: 750W
• Dimensions: 288 × 132 × 50mm
• PCIe: 5.0 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: Dual BIOS (Performance/Silent), FSR 4, HYPR-RX, Fluid Motion Frames, AV1 encoding, RGB Fusion

Proudly sold by the Ringwood Digital Store.

The Steel Legend Dark shares its foundation entirely with the standard Steel Legend: AMD’s full Navi 48 die, 64 compute units, 4096 stream processors, 3rd-generation RT accelerators, 2nd-generation AI accelerators, and the complete RDNA 4 feature set. Boost clock sits at AMD’s reference 2970 MHz, game clock at 2400 MHz, with 16GB of GDDR6 running at 20 Gbps across a 256-bit bus for 640 GB/s of memory bandwidth and 64MB of Infinity Cache. FSR 4, HYPR-RX, Fluid Motion Frames with Anti-Lag 2, and hardware AV1 encoding are all onboard — nothing is cut or changed between the two colourways on the spec sheet.

The Dark Colourway — Built for Black and Neutral Builds

Where the standard Steel Legend uses a white and grey split fan shroud, the Dark edition goes full black across the shroud, backplate, and I/O bracket. The three ARGB fans retain the Striped Ring Fan blade design and full Polychrome SYNC lighting — and with a dark shroud behind them, the RGB contrast is notably more dramatic than on the white version. The hardware RGB toggle switch on the card edge remains, letting you kill the lighting entirely without software for a clean blacked-out look. Everything else is structurally identical: reinforced metal frame, Ultra-fit heatpipes, Air Deflecting Fins, Super Alloy power delivery components, and the full-length metal backplate.

3× DisplayPort, 2× 8-pin, PCIe 5.0

The output layout is unchanged: 3× DisplayPort 2.1a and 1× HDMI 2.1b supporting up to four simultaneous displays at up to 7680×4320. Power delivery uses 2× 8-pin PCIe connectors — simpler than the 3× 8-pin required by some competing 9070 XT models. A quality 750W+ PSU is recommended. Dimensions are 298 × 131 × 58mm (~2.9 slots) — identical to the white Steel Legend, so the same case clearance considerations apply.

Same card, different colour: If you’re deciding between the Steel Legend and Steel Legend Dark, the only difference is the colourway. Choose based on your build’s aesthetic — white/grey vs black.

No factory OC, no Dual BIOS: Reference clocks only — no factory overclock and no Dual BIOS switch. See the Gigabyte RX 9070 XT Gaming OC if either of those features is a priority.

RGB software dependency: Full Polychrome SYNC control requires ASRock software. OpenRGB does not currently support this card. The hardware toggle disables lighting entirely without software.

Case clearance: 298mm length and ~2.9 slots — verify clearance in mATX and smaller builds.

Specs at a Glance

• GPU: AMD Radeon RX 9070 XT (RDNA 4, Navi 48, 4nm)
• Compute Units: 64 | Stream Processors: 4096 | Infinity Cache: 64MB
• Boost Clock: Up to 2970 MHz (reference) | Game Clock: 2400 MHz
• Memory: 16GB GDDR6, 256-bit, 20 Gbps | Bandwidth: 640 GB/s
• Outputs: 3× DisplayPort 2.1a, 1× HDMI 2.1b (4 displays max)
• Power Connectors: 2× 8-pin PCIe
• Dimensions: 298 × 131 × 58mm (~2.9 slots)
• PCIe: 5.0 x16 | DirectX: 12 Ultimate | OpenGL: 4.6
• Features: Polychrome SYNC ARGB, RGB toggle switch, FSR 4, HYPR-RX, Fluid Motion Frames, Anti-Lag 2, AV1 encoding, Super Alloy components

Proudly sold by the Ringwood Digital Store.