The Spectrix D60G is built around one of the most distinctive visual designs in the desktop memory market. The fully exposed RGB light strips are extra-wide for maximum effect, combined with a mesmerising multi-coloured flow effect to outshine the competition — covering 9,497mm² of surface area, equating to over 60% of the module’s total surface. The diamond-cut, multi-faceted aluminium heat spreader in tungsten grey gives the module an avant-garde, premium aesthetic that stands out in windowed builds. RGB effects are fully programmable via the XPG RGB Sync app, and the lighting is compatible with existing RGB control software from major motherboard makers including ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & XMP 2.0

This module ships with Intel XMP 2.0 profiles for easy, one-click overclocking from BIOS. The AX4U32008G16A-ST60 runs at DDR4-3200 with CL16-20-20 timings when XMP is enabled — a compatibility-optimised profile designed to achieve rated performance reliably across a wide range of Intel and AMD motherboards. Operating voltage at XMP is 1.35V. Without XMP enabled, the module defaults to DDR4-2666 at JEDEC base spec — XMP must be activated in BIOS to reach advertised speed.

XMP must be enabled for rated speed: This module defaults to DDR4-2666 at JEDEC. Enable XMP 2.0 in your motherboard BIOS to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Heat Spreader & Thermals

The D60G is built with high-quality chips and a metal heat sink for excellent signal integrity, reliability, and stability, which effectively extends the lifespan of the memory module. At 45.93mm in height the heat spreader adds meaningful thermal headroom, though buyers with large tower CPU coolers should verify clearance — particularly in tight mid-tower builds with top-mounted RAM slots near the cooler’s heatsink stack.

Check CPU cooler clearance: At approximately 46mm tall, the D60G is taller than standard heatspreadless modules. Confirm your CPU cooler’s RAM clearance specification before purchasing, especially with large tower coolers.

Compatibility

The Spectrix D60G is tested to work with both AMD and Intel motherboards, compatible across AM4 (Ryzen), LGA1200 (10th/11th gen Intel), and LGA1700 (12th/13th gen Intel where DDR4 is supported). As a single 8GB stick it operates in single-channel mode; pair it with a second unit in the recommended dual-channel slots for maximum memory bandwidth. Two sticks also doubles the RGB presence in your build.

Single stick = single channel: For dual-channel bandwidth and a symmetrical RGB look, add a second matching AX4U32008G16A-ST60 and install both in your motherboard’s recommended dual-channel slots.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); CL22 JEDEC default
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Default speed: DDR4-2666 without XMP
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — dual RGB light strip, programmable
• Heat Spreader: Aluminium tungsten grey, diamond-cut
• RGB Software: XPG RGB Sync; ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome compatible
• Colour: Tungsten Grey
• Dimensions: 133.35 × 45.93 × 8.4mm

Proudly sold by the Ringwood Digital Store.

The XPG Spectrix D50 features a simplistic and clean design with a sharp angular geometric theme, including a triangle-shaped RGB light diffuser. The heat sink is composed of thick aluminium with deep grooves on each side, adding to its style and increasing surface area for better cooling. At 1.95mm thick, the metal heat spreader offers excellent durability and projects an air of strength and high performance — substantially more robust than the thin stamped spreaders common on mid-tier RGB modules. The tungsten grey colourway is understated and build-neutral, complementing both dark and light themed systems.

RGB Lighting

The D50 features a clean and elegant exterior with simple geometric lines and a triangular RGB panel that fits in perfectly with the module’s overall design. Using the XPG RGB Sync app or compatible motherboard RGB software, users can switch between four RGB modes — Static, Breathing, Comet, and Music — giving solid personalisation options without overwhelming the build’s aesthetic. The D50’s RGB approach is intentionally more restrained than the D60G’s full-strip design, producing a softer, more focused glow. RGB sync support covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & XMP 2.0

The D50 runs at a tested speed of 3200MHz with CL16-20-20 timings at 1.35V via Intel XMP 2.0. Without XMP enabled, the module defaults to its JEDEC base frequency — typically DDR4-2666 — and XMP must be activated in BIOS to reach the rated DDR4-3200 speed. Intel XMP 2.0 makes overclocking a snap and enhances system stability, allowing users to apply the rated frequency without manually adjusting individual BIOS parameters.

XMP must be enabled for rated speed: Without activating XMP 2.0 in BIOS, this module will default to JEDEC speed (typically DDR4-2666). Enable XMP on Intel, or DOCP/EXPO on AMD, to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Compatibility & Warranty

ADATA memory modules have been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance, in addition to full Intel platform support. The module is compatible across AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it runs in single-channel mode by default; installing a second matching module in the recommended dual-channel slots unlocks full dual-channel bandwidth and pairs the RGB for a symmetrical look.

Check CPU cooler clearance: The 1.95mm aluminium heat spreader adds height to the module. Verify your CPU cooler’s RAM slot clearance before purchasing, particularly with large tower air coolers.

Single stick = single channel: Pair with a second AX4U320038G16A-ST50 in the recommended dual-channel slots for maximum bandwidth and a matched RGB look.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — triangular RGB light bar, 4 modes (Static, Breathing, Comet, Music)
• Heat Spreader: 1.95mm aluminium, tungsten grey
• RGB Software: XPG RGB Sync; ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome compatible
• Colour: Tungsten Grey
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Delta RGB is Team Group’s most visually striking DDR4 memory line, and the design language is unmistakable. The hollow “R” on the heat spreader represents Revolution — built with a lighter and thinner metal material, the stereoscopic design matches with the ultra-wide-angle luminous area for a distinctive look. The full-frame 120° ultra-wide-angle illumination at the top emits colourful bright light with the built-in Force Flow RGB lighting effect, with colours changing smoothly to provide an unparalleled visual experience day or night.

RGB sync is compatible across all major motherboard ecosystems: ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, and BIOSTAR Advanced VIVID LED DJ are all supported, alongside Team Group’s own T-Force BLITZ control software.

Performance & XMP 2.0

Timings are CL16-18-18-38 at DDR4-3200MHz with an operating voltage of 1.35V, with Intel XMP 2.0 supported for one-click overclocking. Without XMP enabled the module defaults to its JEDEC base speed — XMP must be activated in BIOS to achieve the rated DDR4-3200 at CL16.

XMP must be enabled for rated speed: If XMP 2.0 is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR4-2133/2400 or lower. This is a normal phenomenon and not a product defect. It is recommended to update your motherboard BIOS before installing to ensure optimal compatibility and performance.

Heat Spreader & Build Quality

The aluminium alloy heat spreader uses an asymmetrical minimalist design that keeps the module’s profile relatively slim while providing effective thermal dissipation for sustained CL16 operation. The working voltage of 1.2–1.4V ensures energy-efficient operation that reduces temperature and heat generated, offering stable long-term performance.

Compatibility

Multiple compatibility verifications with mainstream DDR4 motherboards ensure stability across all boards on the QVL (Qualified Vendor List), covering both Intel and AMD platforms. As a single 16GB stick it runs in single-channel mode by default; pairing with a second unit in the recommended dual-channel slots enables 32GB dual-channel and doubles the RGB presence.

Single stick = single channel: For dual-channel bandwidth and a symmetrical RGB pairing, install a second module in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct configuration.

Check CPU cooler clearance: The Delta RGB heat spreader adds height to the module. Verify your CPU cooler’s RAM clearance before purchasing, particularly with large tower air coolers.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-18-18-38
• Voltage: 1.35V (XMP) / 1.2V (JEDEC default)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — Force Flow effect, 120° ultra-wide-angle full-frame illumination
• Heat Spreader: Aluminium alloy, asymmetric design with hollow “R” motif
• Colour: White
• RGB Software: T-Force BLITZ; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync, BIOSTAR VIVID LED DJ compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Predator DDR4 RGB is one of the most recognisable gaming memory modules ever produced, and the HX432C16PB3A/8 carries that pedigree in full. The dense black aluminium heat spreader and matching black PCB keep your rig running and looking cool, with smooth, stunning RGB lighting effects bringing your battlestation to life.

The standout feature is HyperX’s patented Infrared Sync technology: Infrared Sync allows you to keep RGB effects synchronised across modules without the need for additional cables — the modules communicate via infrared at up to 18mm working distance, enabling seamless lighting waves across sticks in a multi-module build. The factory preset RGB wave lighting effect is active out of the box, with full customisation available via HyperX NGenuity software and compatibility with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & Dual XMP Profiles

XMP Profile #1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile #2 provides a fallback at DDR4-3000 with CL15-17-17 at 1.35V — a secondary profile that ensures rated overclocking performance on platforms that may not fully support DDR4-3200 from XMP Profile 1. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 in your motherboard BIOS (Profile 1 for DDR4-3200 CL16, Profile 2 for DDR4-3000 CL15 as a fallback). Updating your BIOS before installation is recommended for best compatibility.

Build Quality & IC Topology

The HX432C16PB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers and a module height of 42.20mm (1.661″). The 1Rx8 configuration delivers excellent signal integrity for both single and multi-stick configurations. Predator DDR4 RGB is Intel XMP certified with profiles optimised for Intel’s latest chipsets.

Check CPU cooler clearance: At 42.20mm tall, the Predator’s heat spreader is taller than standard heatspreadless modules. Verify your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Compatibility & Warranty

The Intel XMP-ready and certified profiles are optimised for Intel’s latest chipsets and are compatible with many of AMD’s latest chipsets — just select the profile and you’re ready to go. The module is 100% factory tested and backed by a lifetime warranty. As a single 8GB stick it operates in single-channel mode; pairing with a second HX432C16PB3A/8 enables dual-channel and, critically, unlocks the full effect of HyperX’s Infrared Sync for seamless cross-module RGB waves.

Single stick = single channel: For dual-channel bandwidth and synchronised Infrared Sync RGB lighting across both modules, pair with a second HX432C16PB3A/8 in your motherboard’s recommended dual-channel slots.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP Profile 1); CL15-17-17 @ 1.35V (XMP Profile 2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two hand-tuned profiles
• RGB: Yes — factory preset wave effect; HyperX Infrared Sync (cable-free)
• Heat Spreader: Dense black aluminium; matching black PCB
• Height: 42.20mm (1.661″)
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Black
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Fury RGB takes the Fury’s proven platform and adds a full-length illuminated RGB diffuser strip along the top of the module. Unlike the Predator RGB’s cable-free Infrared Sync, the Fury RGB relies on software sync via motherboard RGB ecosystems — making it compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, and ASRock Polychrome Sync, as well as HyperX’s own NGenuity software for standalone lighting customisation. The black aluminium heat spreader and black PCB carry over from the non-RGB Fury, with the illuminated diffuser sitting above the spreader for a clean, layered aesthetic.

The addition of the RGB diffuser increases module height to 41.24mm — up from the non-RGB Fury’s 34.1mm — which is comparable to other RGB gaming modules and still narrower than the Predator RGB’s 42.2mm. Most large tower air coolers will clear this height, but it’s worth verifying before purchasing.

Check CPU cooler clearance: At 41.24mm tall, the Fury RGB is taller than the non-RGB Fury (34.1mm). Confirm your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Performance & Dual XMP Profiles

The Fury RGB shares its full performance specification with the non-RGB Fury. XMP Profile 1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 with CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. Plug N Play auto-overclocking at 2400MHz and 2666MHz is also supported on compatible platforms, making initial setup straightforward even before XMP is manually enabled.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your motherboard BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best results.

AMD note: On AMD Ryzen platforms, the module will boot at JEDEC default speed. XMP Profile 1 must be manually selected in BIOS to enable the rated DDR4-3200 frequency and CL16 timings.

IC Quality & Build

The HX432C16FB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers on a 288-pin form factor. Kingston backs all HyperX Fury memory with 100% factory testing at rated speeds and a lifetime warranty. Depending on production batch, ICs are typically Samsung B-die or Micron Rev.E — both of which have excellent compatibility track records across mainstream DDR4 platforms.

Positioning vs Fury & Predator RGB

The Fury RGB sits between the non-RGB Fury and the Predator RGB in Kingston’s HyperX DDR4 lineup. It matches the Predator RGB’s CL16 XMP performance profile but trades the Predator’s Infrared Sync cable-free multi-module synchronisation for a more accessible price point. The non-RGB Fury offers the same performance in a lower-profile (34.1mm) package for cooler-clearance-constrained builds. If RGB sync across multiple sticks is a priority and budget allows, the Predator RGB’s Infrared Sync is the more elegant solution; for a single RGB stick or a budget-conscious RGB build, the Fury RGB delivers full value.

Single stick = single channel: For dual-channel bandwidth and matched RGB lighting across both slots, add a second HX432C16FB3A/8 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: Yes — full-length illuminated diffuser strip; software sync
• Heat Spreader: Black aluminium with RGB diffuser — 41.24mm height
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync compatible
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Fury RGB 16GB carries forward the same RGB implementation as the 8GB variant — a full-length illuminated diffuser strip along the top of the module driven by software-controlled RGB, compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, and ASRock Polychrome Sync, as well as HyperX’s own NGenuity software. The black aluminium heat spreader and matching black PCB maintain the Fury’s clean aesthetic, with the RGB diffuser sitting above the spreader.

The RGB diffuser adds height to 41.24mm (1.624″) with the heatsink fitted — up from the non-RGB Fury /16’s 34.1mm, and a fraction narrower than the Predator RGB’s 42.2mm. This is comparable to most RGB gaming modules and should clear the majority of tower air coolers, but clearance should be verified before purchasing.

Check CPU cooler clearance: At 41.24mm tall, the Fury RGB is taller than the non-RGB Fury (34.1mm). Verify your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Dual-Rank (2Rx8) Configuration

The HX432C16FB3A/16 is a 2Rx8 dual-rank module based on sixteen 1G×8-bit FBGA components — the same IC topology as the non-RGB Fury /16 and the Predator /16. The dual-rank configuration allows the memory controller to interleave between ranks during operation, delivering improved effective memory bandwidth compared to single-rank 16GB alternatives at the same clock speed and timings.

Dual XMP Profiles & Plug N Play

XMP Profile 1 runs at DDR4-3200 CL16-18-18 at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. Plug N Play auto-overclocking at 2400MHz and 2666MHz on compatible platforms is also supported — providing a performance step-up even before XMP is manually activated in BIOS.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best compatibility.

AMD note: On AMD Ryzen platforms, the module boots at JEDEC default speed. XMP Profile 1 must be manually selected in BIOS to enable DDR4-3200 at CL16.

Positioning Within the Fury & Predator RGB Lineup

The HX432C16FB3A/16 sits at the intersection of capacity and RGB value in the HyperX DDR4 lineup. Compared to the non-RGB Fury /16 (HX432C16FB3/16): adds RGB at the cost of 7mm extra height. Compared to the Fury RGB /8 (HX432C16FB3A/8): doubles capacity to 16GB in a single slot, steps up to dual-rank. Compared to the Predator RGB /8 (HX432C16PB3A/8): higher capacity single stick, without Infrared Sync cable-free multi-module synchronisation. For builders who want 16GB single-stick with RGB and don’t need Infrared Sync, this is the natural choice.

Single stick = single channel: For dual-channel bandwidth and symmetrical RGB across both DIMM slots, add a second HX432C16FB3A/16 in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 2Rx8 dual rank, 16× 1G×8-bit FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: Yes — full-length illuminated diffuser strip; software sync
• Heat Spreader: Black aluminium with RGB diffuser — 41.24mm height
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync compatible
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The HX432C16PB3A/16 is where every feature in the HyperX Predator DDR4 RGB line converges in a single module: 16GB capacity, 2Rx8 dual-rank topology, CL16 XMP overclocking, Infrared Sync cable-free RGB, and the Predator’s signature dense black heat spreader — at 42.20mm height with full illumination across the top of the module. Nothing in this lineup exceeds it.

Infrared Sync RGB Lighting

The defining feature that separates the Predator RGB from every other module listed is HyperX’s patented Infrared Sync technology. Infrared Sync allows you to keep RGB effects synchronised across modules without the need for additional cables — modules communicate via infrared at up to 18mm working distance, enabling seamless lighting waves across multiple sticks in a populated build. The factory preset RGB wave lighting effect is active out of the box, with full customisation available via HyperX NGenuity software and sync compatibility with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync. The dense black aluminium heat spreader and matching black PCB keep the rig running and looking cool.

Dual-Rank (2Rx8) Configuration

Mirroring the non-RGB Predator /16 confirmed in the previous listing, the HX432C16PB3A/16 is a 2Rx8 dual-rank module built on sixteen 1G×8-bit FBGA components — the same topology as the Fury RGB /16 and Predator /16. The dual-rank configuration allows the memory controller to interleave between ranks, delivering improved effective memory bandwidth over single-rank 16GB alternatives at the same clock speed — a genuine advantage for memory-intensive gaming, content creation, and multitasking workloads.

Dual XMP Profiles & Performance

XMP Profile 1 runs at DDR4-3200 CL16-18-18 at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. Two hand-tuned profiles ensure rated CL16 performance on capable platforms while providing a reliable secondary profile for systems that can’t sustain DDR4-3200 under XMP Profile 1.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best compatibility and stability.

AMD note: On AMD Ryzen platforms, the module boots at JEDEC default speed. XMP Profile 1 must be manually selected in BIOS to enable DDR4-3200 at CL16.

Heat Spreader & Build Considerations

The module stands at 42.20mm (1.661″) with heatsink fitted — the tallest module in this entire memory range. The Predator RGB’s dense aluminium heat spreader provides excellent thermal mass for sustained XMP operation, but height clearance must be verified against your CPU cooler before purchasing.

Check CPU cooler clearance: At 42.20mm, this is the tallest module in the range. Confirm your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Flagship Positioning

The HX432C16PB3A/16 is the natural endpoint of the HyperX DDR4 lineup in this store. Compared to the Predator RGB /8: doubles capacity to 16GB and steps up to dual-rank. Compared to the Fury RGB /16: adds Infrared Sync cable-free multi-module synchronisation and the heavier Predator heat spreader. Compared to the Predator non-RGB /16: adds the full Infrared Sync RGB system. For buyers who want the best single-stick DDR4-3200 module available in this range — no compromises on capacity, performance, or lighting — this is it.

Infrared Sync requires two modules: Infrared Sync’s seamless cross-module RGB waves require a second HX432C16PB3A/16 installed within 18mm. A single stick will still display the factory preset RGB wave effect independently.

Single stick = single channel: For dual-channel bandwidth and full Infrared Sync, add a second HX432C16PB3A/16 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 2Rx8 dual rank, 16× 1G×8-bit FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two hand-tuned profiles
• RGB: Yes — factory preset wave effect; HyperX Infrared Sync (cable-free, 18mm range)
• Heat Spreader: Dense black aluminium — 42.20mm height
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Black
• Operating Temp: 0°C to +85°C
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The D60G’s defining visual identity carries over fully to the 16GB single-stick variant. The fully exposed RGB light strips are extra-wide for maximum effect, combined with a mesmerising multi-coloured flow effect — covering 9,497mm² of surface area, equating to over 60% of the module’s total surface. The design uses 10 LEDs total — five per side of the PCB — behind a 126mm × 6mm light diffuser viewed from above, with the diamond-inspired, multi-faceted surface standing at 133mm long, 45mm tall, and 9mm thick. No other memory module in this range — or in the DDR4 market broadly — matches this RGB surface area ratio.

Diamond-Cut Heat Spreader

The unique avant-garde styling of the D60G includes an edgy X-light design with a diamond-inspired, multi-faceted surface that’s a cut above the rest. The tungsten grey anodised aluminium heat spreader is both functional and architectural — built with high-quality chips and a metal heat sink for excellent signal integrity, reliability, and stability, which effectively extends the lifespan of the memory module.

RGB Software Compatibility

The D60G’s lighting is compatible with existing RGB control software from major motherboard makers — ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync — alongside ADATA’s own XPG RGB Sync app for standalone effect customisation including patterns, pulse speed, and lighting intensity.

Performance & XMP 2.0

The AX4U320016G16A-ST60 runs at DDR4-3200 (PC4-25600) at CL16, 1.35V, with Intel XMP 2.0 support for easy overclocking. The CL16-20-20 timing profile is the compatibility-optimised XMP profile, designed for broad stability across Intel and AMD DDR4 platforms. Without XMP enabled the module defaults to JEDEC base speed — typically DDR4-2666.

XMP must be enabled for rated speed: This module defaults to JEDEC speed without XMP 2.0 activated in BIOS (or DOCP/EXPO on AMD). Enable XMP to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

8GB vs 16GB D60G

The AX4U320016G16A-ST60 is the single-stick 16GB variant of the same platform as the 8GB AX4U32008G16A-ST60 listed elsewhere in this range. Both deliver identical RGB performance, XMP profiles, and physical design — the 16GB single-stick is the right choice for systems targeting 16GB in a single slot, or as the foundation of a future 32GB dual-channel RGB build.

Check CPU cooler clearance: At 45mm tall the D60G is one of the taller modules in this range. Verify your CPU cooler’s RAM clearance before purchasing, particularly with large tower air coolers.

Single stick = single channel: For dual-channel bandwidth and double the RGB presence, install a second AX4U320016G16A-ST60 in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — dual RGB light strip, 10 LEDs, 9,497mm² surface coverage (>60% of module)
• Heat Spreader: Diamond-cut multi-faceted aluminium, tungsten grey
• Dimensions: 133 × 45 × 9mm
• RGB Software: XPG RGB Sync; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• ECC: Non-ECC
• Buffering: Unbuffered
• Colour: Tungsten Grey
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Viper Steel RGB features a clean matte-black aluminium heat spreader bearing only the golden Viper logo and a removable specification sticker — keeping the design clutter-free and premium. At 44mm (1.73 inches) tall, the Viper Steel RGB is not excessively tall and should fit under the majority of CPU air coolers, though clearance should be confirmed before purchasing. The matte-black finish and gold accent create a striking visual contrast without being overstated — a confident aesthetic that suits both gaming and professional build aesthetics.

Five-Zone RGB Lighting

The RGB light bar features five customisable lighting zones. Patriot does not provide dedicated RGB control software for the Viper Steel RGB — lighting control relies on motherboard RGB sync software, with compatibility covering ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, and ASRock Polychrome Sync. For builders already invested in any of these ecosystems, the Viper Steel RGB integrates seamlessly; those without a compatible motherboard should verify sync support before purchasing.

No standalone RGB software: RGB control requires compatible motherboard software (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light, or ASRock Polychrome Sync). Ensure your motherboard supports one of these ecosystems before purchasing.

Performance & XMP 2.0

The PVSR48G360C0 runs at DDR4-3600 (PC4-28800) with CL20-26-26-46 timings at 1.35V. Without XMP enabled, the module defaults to DDR4-2666 at 19-19-19-43 at stock. CL20 at DDR4-3600 is a looser primary timing profile than CL16 or CL18 alternatives at this frequency — the performance advantage over DDR4-3200 CL16 modules comes from raw bandwidth at the higher clock rate rather than lower absolute latency. DDR4-3600 remains the recognised sweet spot for AMD Ryzen DDR4 performance at the platform’s optimal 1:1 FCLK ratio.

XMP must be enabled for rated speed: This module defaults to DDR4-2666 without XMP 2.0 activated in BIOS (or DOCP/EXPO on AMD). Enable XMP to unlock DDR4-3600 at CL20-26-26-46. Updating your BIOS before installation is recommended for best compatibility.

CL20 note: The CL20 primary timing at DDR4-3600 is looser than the CL16 or CL18 found on some competing modules at the same frequency. The bandwidth advantage from the higher clock speed is the primary performance benefit over DDR4-3200 CL16 alternatives.

Quality & Compatibility

The Viper Steel memory modules are built for the latest Intel and AMD platforms, hand tested and validated for system compatibility, and backed by a limited lifetime warranty. Compatible across AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it operates in single-channel mode by default; pairing with a second matching module enables 16GB dual-channel.

Single stick = single channel: For dual-channel bandwidth and synchronised five-zone RGB lighting across both slots, install a second PVSR48G360C0 in your motherboard’s recommended paired DIMM slots.

Check CPU cooler clearance: At 44mm tall, verify your CPU cooler’s RAM clearance before purchasing, particularly with large tower air coolers.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3600MHz (PC4-28800) via XMP 2.0
• Timings: CL20-26-26-46 (XMP); DDR4-2666 19-19-19-43 (JEDEC default)
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — five-zone RGB light bar
• Heat Spreader: Matte-black aluminium with gold Viper logo — 44mm height
• RGB Software: ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync compatible (no standalone app)
• ECC: Non-ECC
• Buffering: Unbuffered
• Colour: Matte Black / Gold
• Platform: Intel & AMD DDR4 compatible
• Testing: Hand tested and validated
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The AX4U320016G16A-SW50 carries the D50’s clean geometric design language in a white anodised finish — the triangular RGB diffuser and deep-grooved aluminium heat spreader rendered in white rather than tungsten grey. The heat sink is composed of thick aluminium with deep grooves on each side, adding to its style and increasing surface area for better cooling, and the white colourway pairs naturally with white motherboards, white coolers, and all-white cable builds. The RGB lighting against a white heat spreader produces a particularly vivid contrast — the triangular diffuser’s glow stands out more distinctly than on darker-coloured modules.

Using the XPG RGB Sync app or compatible motherboard RGB software, users can switch between four RGB modes — Static, Breathing, Comet, and Music. Motherboard RGB ecosystem compatibility covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & XMP 2.0

Specs are identical to the tungsten grey AX4U3200716G16A-ST50. The D50 runs at a tested speed of 3200MHz with CL16-20-20 timings at 1.35V via Intel XMP 2.0. Without XMP enabled the module defaults to JEDEC base speed — typically DDR4-2666. Intel XMP 2.0 makes overclocking straightforward and enhances system stability, allowing users to apply the rated frequency without manually adjusting individual BIOS parameters.

XMP must be enabled for rated speed: Without activating XMP 2.0 in BIOS (or DOCP/EXPO on AMD), this module defaults to JEDEC speed — typically DDR4-2666 or lower. Enable XMP to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Quality & Compatibility

ADATA memory has been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance, with full Intel platform support. Compatible across AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). As a single 16GB stick it operates in single-channel mode by default; pairing with a second matching module enables 32GB dual-channel and a symmetrical white RGB look across both slots.

Grey vs White D50 at 16GB

The AX4U320016G16A-SW50 is spec-for-spec identical to the tungsten grey AX4U3200716G16A-ST50 — the only difference is the white heat spreader finish. Choose tungsten grey for dark or neutral-themed builds; choose white for all-white or light-themed systems. Both carry the same DDR4-3200 CL16 XMP performance, triangular RGB panel, four lighting modes, and lifetime warranty.

Check CPU cooler clearance: The D50’s 1.95mm aluminium heat spreader adds height. Verify your CPU cooler’s RAM clearance before purchasing, particularly with large tower air coolers.

Single stick = single channel: For dual-channel bandwidth and a symmetrical white RGB pairing, install a second AX4U320016G16A-SW50 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — triangular RGB light bar; 4 modes (Static, Breathing, Comet, Music)
• Heat Spreader: 1.95mm aluminium, white
• RGB Software: XPG RGB Sync; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• ECC: Non-ECC
• Buffering: Unbuffered
• Colour: White
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.