DDR5-6000 occupies an increasingly attractive position in the DDR5 performance landscape — as Kingston’s own product page notes, increasingly attractive pricing makes DDR5-6000 a safe bet for this generation and the next. At 6000MT/s the module delivers bandwidth of approximately 48GB/s per channel — a significant step up from DDR5-4800’s 38.4GB/s — and on AMD Ryzen 7000 (AM5) platforms it enables a favourable FCLK ratio configuration. On Intel 12th, 13th, and 14th generation platforms the higher frequency translates directly to improved gaming frame rates and application performance in memory-bandwidth-sensitive workloads.

CL30: Exceptional Primary Latency for DDR5-6000

The KF560C30BB-8’s CL30 primary timing is a headline specification — CL30 at 6000MT/s represents one of the tightest primary latency profiles available in consumer DDR5. Kingston FURY Beast DDR5 memory brings cutting-edge technology for next-gen gaming platforms, with on-die ECC (ODECC) for improved stability at extreme speeds, dual 32-bit subchannels for increased efficiency, and an on-module PMIC to provide power where it’s needed most. The combination of high frequency and tight primary timing delivers lower absolute memory access latency in nanoseconds compared to the DDR5-4800 CL40 JEDEC modules in this range.

1Rx16 IC Configuration

The KF560C30BB-8 is built on four 1G×16-bit FBGA components in a 1Rx16 single-rank configuration — a notably lean build that achieves DDR5-6000 CL30 performance with a minimal chip count. This is atypical for high-frequency DDR5 and reflects Kingston’s IC qualification process for XMP 3.0 at this speed grade.

XMP 3.0 Performance Profile

The module supports Intel XMP 3.0, tested at DDR5-6000 CL30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard DDR5-4800 at 40-39-39 at 1.1V. XMP 3.0 must be enabled in BIOS to unlock the rated DDR5-6000 CL30 profile. At 1.4V, the operating voltage is higher than JEDEC DDR5-4800 — this is normal and expected for high-frequency DDR5 XMP operation and within safe DDR5 voltage parameters.

XMP 3.0 must be enabled for rated speed: Without XMP 3.0 activated in BIOS, this module defaults to JEDEC DDR5-4800 at CL40-39-39 at 1.1V. Enable XMP 3.0 to unlock DDR5-6000 at CL30-36-36. Updating your BIOS before installation is strongly recommended for best XMP 3.0 compatibility.

1.4V is normal at DDR5-6000: The elevated operating voltage under XMP is within safe DDR5 parameters and is not a defect.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later. XMP 3.0 is supported natively on Intel 12th gen and later; AMD platforms should use EXPO where supported, or manually apply the XMP profile.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Single stick = single channel: For dual-channel bandwidth, install a second module in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0
• Timings: CL30-36-36 @ 1.4V (XMP 3.0); CL40-39-39 @ 1.1V (JEDEC DDR5-4800)
• Rank / IC: 1Rx16 single rank, 4× 1G×16-bit FBGA components
• Voltage: 1.4V (XMP 3.0) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 supported
• On-Die ECC: Yes
• PMIC: Yes
• Dual Subchannel: Yes
• RGB: None
• Heat Spreader: Black aluminium — FURY Beast
• Contact fingers: Gold
• Operating Temp: 0°C to +85°C
• Colour: Black
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Superseded by: KF560C30BBE-8
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

GeIL is a Taiwanese memory manufacturer with a long track record in performance DDR4 and DDR5 gaming memory. The Orion V RGB series represents their premium DDR5 gaming line, and the design is immediately distinctive. The Orion V RGB series light strips feature a sci-fi-inspired design, with gradually fading triangle patterns on both sides and honeycomb sculptures on top, creating a unique and dynamic RGB colour effect. In Glacier White, the aluminium heat spreader and RGB diffuser present a bright, clean aesthetic purpose-built for white-themed builds — pairing naturally with white motherboards, white coolers, and white cases. The approximately standard height ensures the best compatibility with most computer cases and CPU coolers on the market with zero mechanical interference.

RGB Lighting & Ecosystem Sync

The Orion V RGB’s honeycomb LED top bar delivers vivid, customisable lighting effects. Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, and BIOSTAR Advanced VIVID LED DJ control software, users can easily synchronise the lighting effects based on their motherboard brand and create a unique, personalised effect.

DDR5-6000 Performance: XMP 3.0 & AMD EXPO

The GAVSW516GB6000C36CSC supports both Intel XMP 3.0 and AMD EXPO — one of the few DDR5-6000 modules in this range offering certified one-click overclocking on both major platform ecosystems. Backed by Intel XMP 3.0 and AMD EXPO one-click overclocking support, optimising your rig’s memory settings is effortless and secure. The module runs at CL36 at DDR5-6000, operating at 1.10V–1.45V — the 1.45V figure representing the XMP/EXPO operating voltage, with 1.1V as the JEDEC default. Without XMP 3.0 or EXPO enabled, the module defaults to JEDEC DDR5-4800 at CL40.

XMP 3.0 or AMD EXPO must be enabled for rated speed: Without activating XMP 3.0 (Intel) or EXPO (AMD) in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable the appropriate profile to unlock DDR5-6000 at CL36. Updating your BIOS before installation is strongly recommended.

1.45V is normal at DDR5-6000 under XMP/EXPO: Elevated operating voltage is expected and within safe DDR5 parameters for this speed grade.

DDR5 Platform Features

Equipped with an on-die ECC mechanism, the Orion V RGB series guarantees secure and reliable data, while the included PMIC regulates system load, enhances signal integrity, and improves compatibility. Dual 32-bit subchannel architecture is present as a standard DDR5 feature, delivering improved memory access parallelism compared to DDR4.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board for XMP 3.0, or AMD Ryzen 7000 series (AM5) or later for EXPO.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Single stick = single channel: For dual-channel bandwidth and a symmetrical white RGB look, install a second GAVSW516GB6000C36CSC in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0 / AMD EXPO
• Timings: CL36 (XMP/EXPO); JEDEC default at DDR5-4800 CL40
• Voltage: 1.45V (XMP/EXPO) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes
• Dual Subchannel: Yes
• RGB: Yes — honeycomb LED top bar with triangle pattern heat spreader
• Heat Spreader: Aluminium, Glacier White
• RGB Software: ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, BIOSTAR VIVID LED DJ compatible
• Colour: Glacier White
• Working Temp: 0°C to 70°C
• Dimensions: 13.9 × 3.8 × 0.8cm
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The GAVSW516GB6000C38BSC and GAVSW516GB6000C36CSC are both 16GB single-stick Glacier White Orion V RGB DDR5-6000 modules. The practical distinction is the primary latency: CL38 here vs CL36 on the higher-spec variant. Both run at DDR5-6000 and deliver the same raw bandwidth — the tighter CL36 module achieves marginally lower absolute memory access latency in nanoseconds, which translates to small but measurable gains in latency-sensitive workloads such as gaming frame time consistency and competitive esports titles. For most productivity, content creation, and everyday gaming workloads, the real-world performance difference between CL36 and CL38 at DDR5-6000 is negligible. The CL38 variant is the practical choice for white-build buyers where maximum latency tightness isn’t the priority.

Design & RGB Lighting

The Orion V RGB’s visual identity is identical across both white variants. The sci-fi inspired design features dual-gradient triangle patterns along its sleek aluminium heat spreaders, coupled with a honeycomb LED top bar that diffuses customisable lighting effects. Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, and BIOSTAR Advanced VIVID LED DJ control software, users can easily synchronise the lighting effects based on their motherboard brand.

Performance & Dual-Platform Overclocking

Backed by Intel XMP 3.0 and AMD EXPO one-click overclocking support, optimising your rig’s memory settings is effortless and secure. The module runs at DDR5-6000 CL38 at 1.45V via XMP 3.0 or AMD EXPO, defaulting to JEDEC DDR5-4800 CL40 at 1.1V without a profile enabled. Both Intel and AMD DDR5 platforms are fully supported, making this one of the more platform-agnostic DDR5-6000 single-stick options in this range.

XMP 3.0 or AMD EXPO must be enabled for rated speed: Without activating XMP 3.0 (Intel) or EXPO (AMD) in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable the appropriate profile to unlock DDR5-6000 at CL38. Updating your BIOS before installation is strongly recommended.

1.45V is normal at DDR5-6000 under XMP/EXPO: Elevated operating voltage is expected and within safe DDR5 parameters for this speed grade.

DDR5 Platform Features & Requirements

Equipped with an on-die ECC mechanism, the Orion V RGB series guarantees secure and reliable data, while the included PMIC regulates system load, enhances signal integrity, and improves compatibility. DDR5 is not compatible with DDR4 motherboards or slots — verify your motherboard and CPU support DDR5 before purchasing.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth and a symmetrical white RGB look, install a second GAVSW516GB6000C38BSC in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0 / AMD EXPO
• Timings: CL38 (XMP/EXPO); JEDEC default at DDR5-4800 CL40
• Voltage: 1.45V (XMP/EXPO) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes
• Dual Subchannel: Yes
• RGB: Yes — honeycomb LED top bar with triangle pattern heat spreader
• Heat Spreader: Aluminium, Glacier White
• RGB Software: ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, BIOSTAR VIVID LED DJ compatible
• Colour: Glacier White
• Working Temp: 0°C to 70°C
• Dimensions: 13.9 × 3.8 × 0.8cm
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime
• Part Number: GAVSW516GB6000C38BSC

Proudly sold by the Ringwood Digital Store.

The defining characteristic of the Lancer Blade is its physical profile. The Lancer Blade boasts a low-profile heatsink that fits perfectly in smaller PC cases and avoids interference with tower CPU coolers. Its sleek geometric lines add versatility and visual appeal to any case design. This is the DDR5-6000 answer for builders who want high-frequency DDR5 performance but are constrained by large air coolers, mATX or ITX cases, or tight motherboard layouts where standard-height modules create clearance issues. No RGB lighting is present — the low-profile design keeps height minimal, and the clean geometric aesthetic suits professional and gaming systems alike.

Performance & Dual-Platform Overclocking

The AX5U6000C4816G runs at DDR5-6000 (PC5-48000) at CL48 via Intel XMP 3.0 or AMD EXPO — both profiles are supported, making this one of the more platform-agnostic DDR5-6000 single-stick options in this range. With support for Intel XMP 3.0, get overclocking easily without the need to hassle with BIOS settings — no need to repeatedly adjust and fine-tune overclocking parameters. AMD EXPO support provides compatibility with the latest AMD platforms for reliability and stability. Without XMP 3.0 or EXPO enabled, the module defaults to JEDEC DDR5-4800 at CL40 at 1.1V.

CL48 at DDR5-6000 is a looser primary timing profile than the CL30 or CL36 variants available in this range — the bandwidth advantage from the 6000MT/s clock rate is the primary performance benefit. For workloads prioritising raw memory throughput, DDR5-6000 CL48 compares favourably to DDR5-4800 CL40; for latency-critical workloads, the tighter-timed CL30 modules deliver lower absolute access latency.

XMP 3.0 or AMD EXPO must be enabled for rated speed: Without activating XMP 3.0 (Intel) or EXPO (AMD) in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable the appropriate profile to unlock DDR5-6000 at CL48. Updating your BIOS before installation is strongly recommended.

1.4V is normal at DDR5-6000 under XMP/EXPO: Elevated operating voltage is expected and within safe DDR5 parameters for this speed grade.

Quality, Stability & DDR5 Features

High-quality ICs and PCBs ensure uncompromised performance and reliable overclocking, ideal for discerning gamers and overclockers. The XPG Lancer Blade DDR5 features a built-in PMIC that enhances power supply stability, with lower operating voltage also making it more power-efficient than DDR4. With on-die ECC, this DDR5 memory module can correct errors in real-time to provide increased stability and reliability.

Lancer Blade vs Lancer Blade RGB

The AX5U6000C4816G is the non-RGB Lancer Blade — no lighting, maximum low-profile advantage. The RGB variants (AX5U6000C4816G-SLABRBK etc.) add a subtle RGB diffuser with four lighting modes but carry a slightly larger footprint. For builds where cooler clearance is the primary concern, the non-RGB Lancer Blade is the appropriate choice.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Single stick = single channel: For dual-channel bandwidth, install a second AX5U6000C4816G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0 / AMD EXPO
• Timings: CL48 (XMP/EXPO); JEDEC default at DDR5-4800 CL40
• Voltage: 1.4V (XMP/EXPO) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes — built-in power management IC
• Dual Subchannel: Yes
• RGB: None
• Heatsink: Low-profile aluminium, geometric design, black
• Colour: Black
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The XPG Caster RGB sits above the Lancer RGB in ADATA’s DDR5 gaming memory hierarchy. Both deliver DDR5-6000 CL30 at 1.35V — the performance specification is identical — but the Caster distinguishes itself through design and ecosystem integration. With its Tungsten Grey steel heat spreader, bold triangular RGB light, and streamlined aerodynamic form, the XPG Caster RGB radiates a sense of high performance and futuristic style that takes the Lancer’s geometric design language to a more refined, premium expression.

XPG Prime Ecosystem

The Caster RGB adds a meaningful differentiator over the Lancer: XPG Prime lighting control software not only allows you to set unique DRAM lighting effects, but also lets you sync all Prime-supported XPG RGB products to create imaginative light shows and shape your own Prime ecosystem. For builders running multiple XPG RGB components — fans, coolers, cases — the Prime ecosystem enables unified cross-product lighting control, a capability absent from the Lancer RGB’s motherboard-software-only approach.

RGB Lighting

Set the RGB lighting the way you want it — choose from Static, Breathing, and Comet effects, or sync the lights with your favourite music via Music Mode. All this can be done through RGB control software from all major motherboard brands. The triangular RGB light bar sits against the Tungsten Grey heat spreader, producing a focused, directional glow that complements the module’s angular, aerodynamic profile. Motherboard ecosystem compatibility covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync in addition to XPG Prime.

Performance & XMP 3.0

The AX5U6000C3016G-CCARGY runs at DDR5-6000MHz, CL30-40-40 at 1.35V. Intel XMP 3.0 is supported for one-click overclocking to the rated DDR5-6000 profile. The integrated PMIC provides stable power regulation at the 1.35V/1.4V operating range. Without XMP 3.0 enabled the module defaults to JEDEC DDR5-4800 at CL40. Note that this grey (GY) variant supports Intel XMP 3.0; buyers on AMD Ryzen 7000 (AM5) platforms should verify DOCP/EXPO compatibility on their specific motherboard before purchasing.

XMP 3.0 must be enabled for rated speed: Without activating XMP 3.0 in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable XMP 3.0 to unlock DDR5-6000 at CL30-40-40. Updating your BIOS before installation is strongly recommended.

AMD platform note: This grey (GY) variant is confirmed for Intel XMP 3.0. AMD Ryzen 7000 (AM5) users should verify DOCP compatibility on their specific motherboard before purchasing.

DDR5 Platform Features & Requirements

The XPG Caster RGB is equipped with integrated on-die ECC for real-time error correction and a PMIC for greater stability and reliability. DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Single stick = single channel: For dual-channel bandwidth and a symmetrical Caster RGB aesthetic, install a second AX5U6000C3016G-CCARGY in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via Intel XMP 3.0
• Timings: CL30-40-40 (XMP 3.0); JEDEC default at DDR5-4800 CL40
• Voltage: 1.35V / 1.4V (XMP); 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 supported
• On-Die ECC: Yes
• PMIC: Yes — integrated power management IC
• Dual Subchannel: Yes
• RGB: Yes — bold triangular RGB light bar; Static, Breathing, Comet, Music modes
• Heat Spreader: Tungsten Grey aluminium, aerodynamic/streamlined design
• RGB Software: XPG Prime; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Tungsten Grey
• Operating Temp: 0°C to 85°C
• Platform: Intel 12th gen+ (DDR5 boards); AMD Ryzen 7000 (AM5) — verify DOCP support
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The AX5U6000C3016G-CLARBK achieves CL30 primary latency at DDR5-6000 — the lowest CAS latency of any module listed in this entire range, matching the Kingston Fury Beast DDR5-6000 CL30 (KF560C30BB-8). The XPG Lancer ushers in the DDR5 era for gaming memory, reaching frequencies of up to 6000MT/s for a major performance boost for gaming and overclocking. CL30 at 6000MT/s translates to approximately 10ns absolute memory access latency — a genuine improvement over CL36 or CL38 modules at the same clock speed, particularly in latency-sensitive gaming workloads such as competitive titles and frame time consistency.

RGB Lighting

Set the RGB lighting the way you want it — choose from different effects (Static, Breathing, and Comet) or sync the lights with your favourite music via Music Mode. All this can be done through RGB control software from all the major motherboard brands. Ecosystem compatibility covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync. The RGB diffuser and aluminium heat spreader measure 133.35 × 40 × 8mm — a standard module height that fits the vast majority of tower CPU coolers without clearance concerns. For a low-profile non-RGB alternative at DDR5-6000 CL48, the Lancer Blade (AX5U6000C4816G) is also listed in this range.

Performance & Dual-Platform Overclocking

The AX5U6000C3016G-CLARBK runs at DDR5-6000MT/s, CL30-40-40 at 1.35V, with Intel XMP 3.0 and AMD EXPO support for easy overclocking. Without a profile enabled the module defaults to JEDEC DDR5-4800. The 1.35V operating voltage is standard for DDR5-6000 CL30 — within safe DDR5 parameters and consistent with other premium CL30 DDR5-6000 modules. The XPG Lancer DDR5 delivers increased bandwidth, allocates more bandwidth per CPU core, and reaches frequencies of 6000MT/s — equipped with a PMIC and ECC for enhanced performance and stability.

XMP 3.0 or AMD EXPO must be enabled for rated speed: Without activating the appropriate profile in BIOS, this module defaults to JEDEC DDR5-4800 at CL40. Enable Intel XMP 3.0 or AMD EXPO to unlock DDR5-6000 at CL30-40-40. Updating your BIOS before installation is strongly recommended.

Build Quality & DDR5 Features

High-quality ICs and PCBs ensure uncompromised performance and reliable overclocking, ideal for discerning gamers and overclockers. The XPG Lancer DDR5 features a built-in PMIC that enhances power supply stability, with lower operating voltage also making it more power-efficient than DDR4. On-die ECC corrects errors in real-time to provide increased stability and reliability. A Blizzard White variant is also available in this lineup for all-white builds.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing.

Check CPU cooler clearance: At 40mm tall, the Lancer RGB is taller than the Lancer Blade’s low-profile design. Verify your CPU cooler’s RAM clearance before purchasing if running a large tower air cooler.

Single stick = single channel: For dual-channel bandwidth and symmetrical RGB, install a second AX5U6000C3016G-CLARBK in your motherboard’s recommended paired DIMM slots.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 6000MT/s (PC5-48000) via XMP 3.0 / AMD EXPO
• Timings: CL30-40-40 (XMP/EXPO); JEDEC default at DDR5-4800 CL40
• Voltage: 1.35V (XMP/EXPO) / 1.1V (JEDEC)
• Overclocking: Intel XMP 3.0 & AMD EXPO supported
• On-Die ECC: Yes
• PMIC: Yes — built-in power management IC
• Dual Subchannel: Yes
• RGB: Yes — Static, Breathing, Comet, Music modes
• Heat Spreader: Black aluminium — 133.35 × 40 × 8mm
• RGB Software: ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Black
• Operating Temp: 0°C to 85°C
• Weight: 72.4g
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.