The Gigabyte TRX40 Aorus Pro WiFi is positioned as the accessible entry point into Gigabyte’s TRX40 lineup, without meaningful compromise on the core platform capabilities. Built on the AMD TRX40 chipset with Socket sTRX4, it supports the full range of 3rd Gen Ryzen Threadripper processors — covering builds from the 24-core 3960X through to the 64-core 3990X. The standard ATX form factor makes chassis compatibility significantly more straightforward than the XL-ATX Designare, broadening the pool of compatible cases for workstation builds.

Power Delivery and Cooling

The board uses a 12+2 phase Infineon Digital VRM with 70A power stages per phase, delivering a combined 980A of CPU power capacity — substantial headroom for high-core-count Threadripper CPUs under sustained all-core workloads. The Fins-Array heatsink with heatpipe keeps VRM temperatures under control, and the TRX40 chipset is cooled by a built-in 5cm ball-bearing fan rated for 50,000 hours. Smart Fan 5 manages all fan headers with hybrid PWM/DC detection and temperature-based profiles, including a FAN STOP mode for passive operation at low loads.

Memory, Storage, and Expansion

Eight DDR4 DIMM slots support quad-channel ECC and non-ECC unbuffered memory up to 256 GB, with OC support extending to DDR4-4400 for compatible kits. Three onboard M.2 slots operate at PCIe 4.0 x4 speeds and each include a thermal guard heatsink to manage NVMe drive temperatures. Eight SATA III ports provide ample conventional storage capacity with RAID 0, 1, and 10 support. Four full-length PCIe 4.0 x16 slots accommodate multi-GPU configurations, though slot spacing means the practical maximum for full dual-slot cards is three GPUs — worth confirming against your GPU width before planning a multi-card build.

Connectivity

A single Intel Gigabit LAN port with cFosSpeed traffic shaping handles wired networking, while onboard Intel WiFi 6 (802.11ax, 2T2R) and Bluetooth 5.0 cover wireless connectivity. USB 3.2 Gen 2 Type-C is available on both the rear I/O panel and as a front panel header. Audio is handled by a Realtek codec with WIMA audio capacitors for clean signal reproduction. RGB Fusion 2.0 with addressable LED headers allows RGB customisation and synchronisation with compatible Gigabyte peripherals. Q-Flash Plus enables BIOS updates from a USB drive without needing a CPU, RAM, or GPU installed — useful for initial platform setup.

This board uses Socket sTRX4 and supports only 3rd Gen Ryzen Threadripper (3000-series). It is not compatible with 1st/2nd Gen Threadripper (TR4) or Threadripper PRO processors.

Unlike the TRX40 Designare, this board ships without the AORUS Gen4 AIC Adaptor or a Thunderbolt add-in card. If you need additional M.2 slots or Thunderbolt 3 connectivity, factor in the cost of those accessories separately.

Due to PCIe slot spacing, only three dual-slot GPUs can be physically installed simultaneously despite four x16 slots being present.

ECC memory functionality is CPU-dependent — verify your Threadripper model supports ECC if that is a workload requirement.

Key Highlights

• AMD TRX40 chipset, Socket sTRX4
• Supports 3rd Gen AMD Ryzen Threadripper processors
• ATX form factor
• 8x DDR4 DIMM slots, quad-channel ECC/non-ECC, up to 256 GB, DDR4-4400 (OC)
• 12+2 phase Infineon Digital VRM, 70A per phase
• 3x PCIe 4.0 x4 M.2 slots with thermal guards
• 4x PCIe 4.0 x16 expansion slots
• 8x SATA III ports with RAID 0/1/10
• Intel Gigabit LAN with cFosSpeed
• Intel WiFi 6 (802.11ax) + Bluetooth 5.0
• USB 3.2 Gen 2 Type-C (rear + front header)
• Realtek HD audio with WIMA capacitors
• RGB Fusion 2.0 with addressable LED headers
• Q-Flash Plus (BIOS update without CPU/RAM/GPU)

Proudly sold by the Ringwood Digital Store.

The Gigabyte TRX40 Aorus Designare is designed for professionals who need more than a desktop CPU can offer. Built on the AMD TRX40 chipset for Socket sTRX4, it supports 3rd Gen AMD Ryzen Threadripper processors — giving access to up to 64 cores and massive PCIe lane counts suited to multi-GPU rendering, simulation, data science, and heavy media production workloads. The XL-ATX form factor accommodates the board’s extensive feature set, and the build quality throughout reflects its workstation positioning.

Power Delivery and Thermal Management

The board uses a 16+3 phase Infineon Digital VRM solution with 70A power stages, providing headroom to sustain high-core-count Threadripper CPUs under prolonged all-core loads without thermal throttling. Triple thermal protection via Fins-Array heatsinks and an 8mm Mega-Heatpipe keeps VRM temperatures in check even in sustained workstation workloads. Hybrid fan headers support both PWM and DC fans, with Smart Fan 5 enabling temperature-based profiles across all headers.

Memory, Storage, and Expansion

Eight DDR4 DIMM slots support quad-channel ECC and non-ECC unbuffered memory, with OC support up to DDR4-4400 for compatible kits — a meaningful advantage for memory-bandwidth-sensitive workloads. Four onboard M.2 slots run at PCIe 4.0 x4 speeds and are fitted with enlarged thermal guards to keep NVMe drives cool under sustained throughput. Eight SATA III ports provide additional storage capacity. Four full-length PCIe 4.0 x16 slots support up to four dual-slot cards simultaneously, making this board well suited to multi-GPU compute or professional visualisation setups. The bundled AORUS Gen4 AIC Adaptor adds a further four M.2 slots via PCIe, bringing total M.2 capacity to eight drives.

Connectivity

Dual Intel Gigabit LAN ports with cFosSpeed traffic shaping and onboard Intel WiFi 6 (802.11ax) with Bluetooth 5.0 cover both wired and wireless network needs. The bundled GC-Titan Ridge add-in card delivers Thunderbolt 3 connectivity at up to 40 Gb/s, useful for high-speed external storage, displays, or daisy-chaining peripherals. Audio is handled by a Realtek ALC1220-VB codec with WIMA capacitors, rated at 120dB SNR for clean output. RGB Fusion 2.0 with addressable LED headers rounds out the feature set for those who want visual customisation.

This board uses Socket sTRX4 and is compatible only with 3rd Gen Ryzen Threadripper (3000-series). It is not compatible with 1st/2nd Gen Threadripper (TR4 socket) or Threadripper PRO processors.

The XL-ATX form factor is larger than standard E-ATX — verify chassis compatibility before purchasing. Not all “XL-ATX compatible” cases accommodate this board’s full dimensions.

ECC memory support depends on the installed CPU — confirm your Threadripper model’s ECC capability if this is a requirement for your workload.

The board ships with the AORUS Gen4 AIC Adaptor and GC-Titan Ridge card included — confirm these are present if purchasing second-hand.

Key Highlights

• AMD TRX40 chipset, Socket sTRX4
• Supports 3rd Gen AMD Ryzen Threadripper processors
• XL-ATX form factor
• 8x DDR4 DIMM slots, quad-channel ECC/non-ECC, up to DDR4-4400 (OC)
• 16+3 phase Infineon Digital VRM, 70A per phase
• 4x onboard PCIe 4.0 x4 M.2 with thermal guards + 4x additional via bundled AORUS Gen4 AIC
• 4x PCIe 4.0 x16 expansion slots (x16/x8/x16/x8)
• 8x SATA III ports
• Dual Intel Gigabit LAN with cFosSpeed
• Intel WiFi 6 (802.11ax) + Bluetooth 5.0
• Bundled GC-Titan Ridge Thunderbolt 3 (40 Gb/s) add-in card
• Realtek ALC1220-VB, 120dB SNR audio
• RGB Fusion 2.0 with addressable LED headers

Proudly sold by the Ringwood Digital Store.

The 2950X is built on GlobalFoundries’ 12nm process using AMD’s Zen+ Colfax architecture, packing 16 cores and 32 threads into AMD’s TR4 socket — the same platform shared across the 2nd-gen Threadripper lineup. Two Zen+ compute dies are connected via AMD’s Infinity Fabric, with a pair of structural filler dies flanking them beneath the heat spreader for consistent socket contact. The result is 64 PCIe Gen 3 lanes and quad-channel DDR4 memory support, delivering a maximum memory bandwidth of around 94 GB/s — figures that put it firmly in workstation territory and well beyond what any mainstream AM4 or AM5 platform can offer.

Workload Performance and Tuning

The 2950X includes Precision Boost 2, Extended Frequency Range 2, and Precision Boost Overdrive for automated and manual frequency tuning across all 16 cores. Dynamic Local Mode automatically switches the processor between Creator Mode for parallelised workloads and Game Mode for gaming, optimising thread scheduling for the active task without requiring a manual switch or system restart. The unlocked multiplier makes overclocking straightforward, and AMD Ryzen Master provides a full monitoring and tuning interface for compatible boards.

Platform Considerations

The 2950X requires an AMD X399 chipset motherboard with the TR4 socket — a dedicated HEDT platform entirely separate from mainstream AM4 boards. The X399 platform supports both 1st and 2nd Gen Ryzen Threadripper processors, with a BIOS update required on some boards. ECC memory is supported via compatible motherboards for professional and reliability-critical environments. As with the 2920X, X399 motherboards are no longer in production, but the used and refurbished market provides solid options for value-oriented workstation builds.

No integrated graphics — a discrete GPU must be installed for display output.

No cooler included — a premium 360mm AIO or high-performance workstation cooler is essential for this 180W processor.

Key Highlights:

• 16 cores / 32 threads, Zen+ architecture (12nm, Colfax)
• Base clock: 3.5 GHz | Boost clock: up to 4.4 GHz
• 32MB L3 cache + 8MB L2 cache (40MB combined)
• TR4 socket | Quad-channel DDR4 | 64 PCIe 3.0 lanes
• 180W TDP
• ECC memory supported (requires compatible motherboard)
• Precision Boost 2, Precision Boost Overdrive & Extended Frequency Range 2 supported
• Dynamic Local Mode — automatic Creator/Game Mode switching
• Unlocked multiplier — overclocking supported
• No integrated graphics — discrete GPU required
• Requires AMD X399 chipset motherboard (TR4 socket)

Proudly sold by the Ringwood Digital Store.

The 2920X is built on GlobalFoundries’ 12nm process using AMD’s Zen+ Colfax architecture, packing 12 cores and 24 threads into AMD’s TR4 socket — the same platform that houses the rest of the 2nd-gen Threadripper lineup. The Threadripper platform’s defining advantage over mainstream desktop processors is its I/O scale: 64 PCIe Gen 3 lanes give you the bandwidth headroom to run multiple GPUs, large NVMe storage arrays, and high-speed networking cards simultaneously, without compromising connectivity between any of them. Quad-channel DDR4 memory further separates it from mainstream platforms, delivering substantially higher memory bandwidth for data-intensive workloads.

Workload Performance and Platform Features

The 2920X includes Precision Boost 2, Extended Frequency Range 2, and Precision Boost Overdrive — a full suite of performance enhancement technologies for automated and manual frequency tuning. Dynamic Local Mode automatically switches the processor between Creator Mode for parallelised workloads and Game Mode for gaming, optimising thread scheduling for the active workload without requiring manual intervention or a system restart. The unlocked multiplier makes overclocking straightforward, and AMD Ryzen Master provides a clean interface for monitoring and tuning.

Platform Considerations

The 2920X requires an AMD X399 chipset motherboard with the TR4 socket — a dedicated HEDT platform separate from mainstream AM4 boards. The X399 platform supports both 1st and 2nd Gen Ryzen Threadripper processors, with a BIOS update required on some boards. ECC memory is supported via compatible motherboards, which is a meaningful capability for professional and reliability-critical workloads. Note that this is a mature platform — new X399 motherboards are no longer in production, but the used and refurbished market remains well-stocked for builders targeting value-oriented workstation builds.

No integrated graphics — a discrete GPU must be installed for display output.

No cooler included — a premium 360mm AIO or high-performance workstation cooler is essential for this 180W processor.

Key Highlights:

• 12 cores / 24 threads, Zen+ architecture (12nm, Colfax)
• Base clock: 3.5 GHz | Boost clock: up to 4.3 GHz
• 32MB L3 cache + 6MB L2 cache (38MB combined)
• TR4 socket | Quad-channel DDR4 | 64 PCIe 3.0 lanes
• 180W TDP
• ECC memory supported (requires compatible motherboard)
• Precision Boost 2, Precision Boost Overdrive & Extended Frequency Range 2 supported
• Dynamic Local Mode — automatic Creator/Game Mode switching
• Unlocked multiplier — overclocking supported
• No integrated graphics — discrete GPU required
• Requires AMD X399 chipset motherboard (TR4 socket)

Proudly sold by the Ringwood Digital Store.