The KCP432NS6/8 is an 8GB DDR4-3200 (PC4-25600) unbuffered, non-ECC U-DIMM running at 1.2V in a single-rank x16 configuration on a 288-pin form factor. It carries no heat spreader — in keeping with Kingston’s value-tier design philosophy — and operates within standard DDR4 thermal envelopes without requiring additional airflow. The single-rank x16 topology is the most commonly deployed configuration for mainstream desktop memory and ensures broad motherboard compatibility.

Performance Profile

At CL22 and 3200MHz, this module sits in the same performance bracket as comparable JEDEC-standard sticks from ADATA and others at this speed grade. There is no XMP profile — the module runs at its rated 3200MHz natively via JEDEC specification, so no BIOS configuration is needed to achieve advertised speeds. The 288-pin DIMM design delivers dependable performance with reliable access to data across a wide range of workloads.

No XMP on this module: Speed is achieved through JEDEC compliance, not an XMP profile. This simplifies deployment but means there is no overclocking headroom. What you see is what you get — and for most business and productivity use cases, that’s exactly the point.

Compatibility

Kingston memory is designed, manufactured, and rigorously tested to meet the exact specifications of each brand-name system, and is guaranteed to be compatible across a wide range of platforms. The KCP432NS6/8 is compatible with mainstream Intel and AMD DDR4 desktop motherboards. As a single 8GB stick it can be used standalone or paired with a second module in a dual-channel configuration — check your motherboard manual for the correct slot pairing.

Single stick = single channel: For full dual-channel bandwidth, install a second identical module in the appropriate paired slot on your motherboard. Refer to your board’s manual for the recommended configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22
• Rank: Single rank (1Rx16)
• Voltage: 1.2V
• ECC: Non-ECC
• Buffering: Unbuffered
• Overclocking: None — JEDEC standard, no XMP
• RGB: None
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Patriot Signature Line is Patriot’s entry-level desktop DDR4 range — no heat spreader, no RGB, no frills. The module ships in a standard black PCB configuration and is designed to fit unobtrusively in any build. It is an unbuffered, non-ECC 288-pin DIMM operating at 1.2V, keeping power consumption low and making it suitable for systems without dedicated memory cooling.

Performance & Reliability

Patriot’s Signature Line DDR4 Non-ECC unbuffered memory delivers the quality, reliability, and performance expected for today’s mainstream computer needs, designed to run at PC4-25600 (3200MHz) at CAS 22 latency timings for better overall system responsiveness when running demanding applications. Full timings are 22-22-22-52 — consistent with other JEDEC-standard DDR4-3200 CL22 modules at this price point. There is no XMP profile; the module achieves its rated speed natively without any BIOS intervention, making deployment straightforward.

No XMP on this module: Speed is JEDEC-native at 3200MHz — no profile to enable, no BIOS tuning required. This makes it ideal for plug-and-play upgrades, but there is no overclocking headroom beyond the rated specification.

Quality Assurance & Warranty

Every module is built using the highest quality components and hand tested to ensure it meets and exceeds industry standards, backed by a lifetime warranty and free customer service. Patriot is a California-based brand with a long track record in consumer and enthusiast memory, and the Signature Line sits at the practical end of their portfolio — prioritising dependability over performance features.

Single stick = single channel: For dual-channel operation, install a second matching module in your motherboard’s recommended paired slot. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22-22-22-52
• Rank: Single rank
• Voltage: 1.2V
• ECC: Non-ECC
• Buffering: Unbuffered
• Overclocking: None — JEDEC standard, no XMP
• RGB: None
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The JetRam line is Transcend’s value-focused desktop memory range, and it carries a meaningful differentiator over generic alternatives: JetRam modules are manufactured with true ETT grade, brand-name DRAM chips that have passed Transcend’s strict screening process and rigorous environmental testing, ensuring excellent compatibility and fully-tested reliability. The module uses a standard 288-pin green PCB with no heat spreader, in keeping with its no-frills design intent, and has a PCB height of 1.23 inches — compatible with virtually all desktop cases and coolers.

Performance & Configuration

The JM3200HLB-8G is a single-rank, 1Gx8 organised module — the x8 IC topology is preferred over x16 for its better signal integrity and more stable operation in populated memory configurations. Each module is rated at 3200MT/s, providing bandwidth of up to 25.6GB/s to increase data transmission efficiency. Timings are CL22, consistent with all JEDEC DDR4-3200 modules in this tier, and no XMP profile is present — the module runs at rated speed natively on any compatible platform.

No XMP on this module: Rated 3200MHz speed is achieved via JEDEC specification — no BIOS tuning or profile activation needed. There is no overclocking capability beyond the factory specification.

Power Efficiency

Operating at a nominal voltage of 1.2V, the JetRam reduces both operating temperature and electrical load on the memory controller, delivering energy savings of up to 40% compared to standard DDR3 modules operating at 1.5V. This makes it a sensible choice for systems where power efficiency and thermal headroom matter — business desktops, small form factor builds, and always-on workstations.

Compatibility & Warranty

The JM3200HLB-8G is compatible with both Intel and AMD Ryzen platforms as a PC4-25600 288-pin unbuffered, non-ECC desktop DIMM, and is backed by Transcend’s limited lifetime warranty. As a single 8GB stick it operates in single-channel mode by default; pairing with a second module enables dual-channel for improved memory bandwidth.

Single stick = single channel: For dual-channel bandwidth, pair with a second identical module in your motherboard’s recommended dual-channel slots. Refer to your board’s manual for correct slot placement.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22
• Rank / Organisation: 1Rx8 (single rank, x8)
• Voltage: 1.2V
• ECC: Non-ECC
• Buffering: Unbuffered
• DRAM: ETT grade, brand-name chips
• Operating Temp: 0°C to 85°C
• Overclocking: None — JEDEC standard, no XMP
• RGB: None
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The Predator DDR4 RGB is one of the most recognisable gaming memory modules ever produced, and the HX432C16PB3A/8 carries that pedigree in full. The dense black aluminium heat spreader and matching black PCB keep your rig running and looking cool, with smooth, stunning RGB lighting effects bringing your battlestation to life.

The standout feature is HyperX’s patented Infrared Sync technology: Infrared Sync allows you to keep RGB effects synchronised across modules without the need for additional cables — the modules communicate via infrared at up to 18mm working distance, enabling seamless lighting waves across sticks in a multi-module build. The factory preset RGB wave lighting effect is active out of the box, with full customisation available via HyperX NGenuity software and compatibility with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & Dual XMP Profiles

XMP Profile #1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile #2 provides a fallback at DDR4-3000 with CL15-17-17 at 1.35V — a secondary profile that ensures rated overclocking performance on platforms that may not fully support DDR4-3200 from XMP Profile 1. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 in your motherboard BIOS (Profile 1 for DDR4-3200 CL16, Profile 2 for DDR4-3000 CL15 as a fallback). Updating your BIOS before installation is recommended for best compatibility.

Build Quality & IC Topology

The HX432C16PB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers and a module height of 42.20mm (1.661″). The 1Rx8 configuration delivers excellent signal integrity for both single and multi-stick configurations. Predator DDR4 RGB is Intel XMP certified with profiles optimised for Intel’s latest chipsets.

Check CPU cooler clearance: At 42.20mm tall, the Predator’s heat spreader is taller than standard heatspreadless modules. Verify your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Compatibility & Warranty

The Intel XMP-ready and certified profiles are optimised for Intel’s latest chipsets and are compatible with many of AMD’s latest chipsets — just select the profile and you’re ready to go. The module is 100% factory tested and backed by a lifetime warranty. As a single 8GB stick it operates in single-channel mode; pairing with a second HX432C16PB3A/8 enables dual-channel and, critically, unlocks the full effect of HyperX’s Infrared Sync for seamless cross-module RGB waves.

Single stick = single channel: For dual-channel bandwidth and synchronised Infrared Sync RGB lighting across both modules, pair with a second HX432C16PB3A/8 in your motherboard’s recommended dual-channel slots.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP Profile 1); CL15-17-17 @ 1.35V (XMP Profile 2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two hand-tuned profiles
• RGB: Yes — factory preset wave effect; HyperX Infrared Sync (cable-free)
• Heat Spreader: Dense black aluminium; matching black PCB
• Height: 42.20mm (1.661″)
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Black
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The HX432C16FB3/8 stands at just 34.1mm (1.3425″) with its heatsink fitted — making it one of the most cooler-friendly CL16 gaming memory modules available. Where the HyperX Predator RGB reaches 42.2mm, the Fury comes in more than 8mm shorter, comfortably clearing the RAM overhang zones of almost all large tower CPU coolers. The revised black aluminium heat spreader gives it a clean, premium look without contributing unnecessary height or weight to the build.

Plug N Play Auto-Overclocking

A standout feature that sets HyperX FURY apart from other DDR4-3200 modules is its Plug N Play auto-overclocking capability. FURY DDR4 features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds, providing a performance boost without requiring any manual BIOS configuration on compatible platforms. On Intel systems that support XMP, enabling XMP Profile 1 in BIOS takes the module to its full DDR4-3200 CL16 rated speed — and on platforms with Plug N Play support, the system handles intermediate speed optimisation automatically.

Dual XMP Profiles & Performance

XMP Profile 1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 with CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. The inclusion of two hand-tuned profiles means the Fury can deliver rated CL16 performance on capable systems while still offering a reliable secondary profile for platforms that struggle with DDR4-3200 from XMP Profile 1.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your motherboard BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best results.

AMD note: AMD Ryzen systems will boot at the JEDEC default speed and latency with FURY. To enable the factory overclock speed and latency, XMP Profile 1 must be selected manually in the BIOS.

IC Quality & Build

The module is a 1Rx8 single-rank design built on eight 1G×8-bit FBGA components with gold contact fingers and a 288-pin form factor. Depending on batch, the HX432C16FB3/8 uses Samsung B-die or Micron Rev.E ICs — both widely supported across mainstream Intel and AMD chipsets. Kingston backs this with 100% factory testing at rated speeds and a lifetime warranty.

Compatibility

The Fury is compatible across mainstream Intel (Core 6th generation onwards) and AMD Ryzen DDR4 platforms, covering AM4, LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it runs in single-channel mode by default; pairing with a second matching module in the recommended dual-channel slots delivers 16GB dual-channel and maximum memory bandwidth.

Single stick = single channel: For dual-channel bandwidth, add a second HX432C16FB3/8 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: None
• Heat Spreader: Low-profile black aluminium — 34.1mm height
• Contact fingers: Gold
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime
• Part Number: HX432C16FB3/8

Proudly sold by the Ringwood Digital Store.

The Fury RGB takes the Fury’s proven platform and adds a full-length illuminated RGB diffuser strip along the top of the module. Unlike the Predator RGB’s cable-free Infrared Sync, the Fury RGB relies on software sync via motherboard RGB ecosystems — making it compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, and ASRock Polychrome Sync, as well as HyperX’s own NGenuity software for standalone lighting customisation. The black aluminium heat spreader and black PCB carry over from the non-RGB Fury, with the illuminated diffuser sitting above the spreader for a clean, layered aesthetic.

The addition of the RGB diffuser increases module height to 41.24mm — up from the non-RGB Fury’s 34.1mm — which is comparable to other RGB gaming modules and still narrower than the Predator RGB’s 42.2mm. Most large tower air coolers will clear this height, but it’s worth verifying before purchasing.

Check CPU cooler clearance: At 41.24mm tall, the Fury RGB is taller than the non-RGB Fury (34.1mm). Confirm your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Performance & Dual XMP Profiles

The Fury RGB shares its full performance specification with the non-RGB Fury. XMP Profile 1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 with CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. Plug N Play auto-overclocking at 2400MHz and 2666MHz is also supported on compatible platforms, making initial setup straightforward even before XMP is manually enabled.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your motherboard BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best results.

AMD note: On AMD Ryzen platforms, the module will boot at JEDEC default speed. XMP Profile 1 must be manually selected in BIOS to enable the rated DDR4-3200 frequency and CL16 timings.

IC Quality & Build

The HX432C16FB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers on a 288-pin form factor. Kingston backs all HyperX Fury memory with 100% factory testing at rated speeds and a lifetime warranty. Depending on production batch, ICs are typically Samsung B-die or Micron Rev.E — both of which have excellent compatibility track records across mainstream DDR4 platforms.

Positioning vs Fury & Predator RGB

The Fury RGB sits between the non-RGB Fury and the Predator RGB in Kingston’s HyperX DDR4 lineup. It matches the Predator RGB’s CL16 XMP performance profile but trades the Predator’s Infrared Sync cable-free multi-module synchronisation for a more accessible price point. The non-RGB Fury offers the same performance in a lower-profile (34.1mm) package for cooler-clearance-constrained builds. If RGB sync across multiple sticks is a priority and budget allows, the Predator RGB’s Infrared Sync is the more elegant solution; for a single RGB stick or a budget-conscious RGB build, the Fury RGB delivers full value.

Single stick = single channel: For dual-channel bandwidth and matched RGB lighting across both slots, add a second HX432C16FB3A/8 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: Yes — full-length illuminated diffuser strip; software sync
• Heat Spreader: Black aluminium with RGB diffuser — 41.24mm height
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync compatible
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Patriot Signature Premium line sits between the bare Signature Line and Patriot’s Viper performance range. The performance specification is identical to the standard Signature Line — JEDEC DDR4-3200, CL22, 1.2V — but the Premium adds a premium aluminium heatshield that the standard Signature Line omits entirely. This serves two purposes: improved heat dissipation during sustained workloads, and a more finished aesthetic that suits both windowed builds and clean professional systems. The module is built from the highest quality components, hand tested, and Patriot ensures every module meets and exceeds industry standards for a hassle-free plug-and-play upgrade.

Performance & Standards

The PSP416G3200H1 is designed to run at PC4-25600 (3200MT/s) at CAS 22 latency timings for better overall system responsiveness when using demanding applications. It is non-ECC and unbuffered, with a CAS latency of 22 and a power rating of 1.2V, operating in a 288-pin DIMM slot. The module runs at its rated DDR4-3200 speed natively via JEDEC specification — no XMP profile, no BIOS adjustment required.

No XMP on this module: DDR4-3200 is achieved via JEDEC specification natively — no BIOS tuning required. The module will also auto-downclock safely on platforms that don’t support DDR4-3200.

Single-Rank Configuration

Unlike the dual-rank Signature Line PSD416G32002, the PSP416G3200H1 is a single-rank 16GB module — using higher-density DRAM chips in a single-rank arrangement. This gives it a slight signal integrity advantage in some multi-slot configurations, while the dual-rank variant offers marginally better memory bus interleaving. For most everyday workloads the difference is negligible; the practical distinction between these two variants is the heatshield and the rank configuration, not real-world performance.

Quality & Warranty

Patriot’s Signature Premium DDR4 memory modules come with free customer service and a lifetime warranty, and the module carries RoHS compliance. Signature Premium memory modules are tested to help ensure quality and performance.

Single stick = single channel: For dual-channel bandwidth, install a second PSP416G3200H1 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22-22-22-52
• Rank: Single rank (1Rx8)
• Voltage: 1.2V
• Standard: JEDEC — no XMP
• ECC: Non-ECC
• Buffering: Unbuffered
• Heat Spreader: Premium aluminium heatshield
• RGB: None
• Testing: Hand tested
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

The ADATA Premier DDR4-3200 U-DIMM is ADATA’s value-tier desktop memory line — clean green PCB, no heat spreader, no RGB — built around strict JEDEC and RoHS compliance for maximum compatibility and reliability. The AD4U320016G22-SGN uses a single-rank x8 (1Rx8) configuration at DDR4-3200, in a 288-pin UDIMM form factor. The 1Rx8 topology at 16GB capacity requires higher-density DRAM chips than more common 2Rx8 alternatives, resulting in strong signal integrity and consistent performance across a wide range of motherboard configurations — including multi-slot deployments.

Performance Profile

Meticulous compliance with JEDEC DDR4 specifications means fast clock frequencies up to 3200MHz combined with 20% power draw savings compared to DDR3, operating at a standard 1.2V. CL22 timings are consistent with all JEDEC DDR4-3200 modules in this value tier. There is no XMP profile — the module runs at its rated 3200MHz natively on any compatible platform without any BIOS adjustment required.

No XMP on this module: DDR4-3200 is achieved via JEDEC specification natively — no BIOS tuning required. The module will also auto-downclock safely on platforms that don’t support DDR4-3200.

Capacity Advantage

At 16GB in a single stick, this module is a particularly efficient upgrade for systems with limited DIMM slots or those where preserving a slot for a future memory expansion is desirable. A single 16GB module running in single-channel mode still delivers meaningful everyday performance for productivity, multitasking, and office workloads — and adding a second matching module later enables 32GB dual-channel without replacing any installed memory.

Standards & Warranty

All ADATA memory modules are produced and tested using a rigorous quality control process, and ADATA provides customers a limited lifetime warranty for maximum assurance. The module is unbuffered, non-ECC, and fully JEDEC DDR4 compliant at 3200MT/s (PC4-25600), CL22, at 1.2V.

Single stick = single channel: For dual-channel bandwidth, install a second AD4U320016G22-SGN in the recommended paired slot on your motherboard. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22
• Rank / IC: Single rank x8 (1Rx8)
• Voltage: 1.2V
• Standard: JEDEC — no XMP
• ECC: Non-ECC
• Buffering: Unbuffered
• RGB: None
• Standards: JEDEC, RoHS compliant
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

Transcend’s JetRam memory modules are manufactured with true ETT grade, brand-name DRAM chips that have passed Transcend’s strict screening process and rigorous environmental testing, providing excellent compatibility and fully-tested reliability — a meaningful differentiator over unbranded budget alternatives. The JM3200HLB-16G ships on a standard 288-pin green PCB with no heat spreader and no RGB, with a PCB height of 1.23 inches — suitable for virtually all desktop cases and CPU cooler configurations.

Performance & IC Configuration

The JM3200HLB-16G uses a single-rank (1Rx8) configuration at DDR4-3200, achieving 16GB capacity through a 1Gx8 chip arrangement. The single-rank topology means the memory controller accesses all chips simultaneously in one operation — delivering consistent, predictable latency characteristics and broad motherboard compatibility, including in multi-slot configurations where rank interleaving between sticks is handled at the channel level rather than within a single module.

Operating at a nominal voltage of just 1.2V, the JetRam reduces both operating temperature and electrical load on the memory controller, saving up to 40% of energy compared to standard DDR3 modules at 1.5V. CL22 timings are JEDEC-standard for DDR4-3200 at this value tier — no XMP profile is present, and the module runs at rated speed natively on any compatible DDR4 platform without BIOS adjustment.

No XMP on this module: DDR4-3200 is achieved via JEDEC specification natively — no BIOS tuning required. The module will also auto-downclock safely on platforms that don’t support DDR4-3200.

Operating Conditions & Warranty

The JetRam operating temperature range is 0°C to 85°C, consistent with the standard DDR4 UDIMM thermal envelope and suitable for all mainstream desktop environments. The module is backed by Transcend’s limited lifetime warranty.

Single stick = single channel: For dual-channel bandwidth, install a second JM3200HLB-16G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600)
• Timings: CL22
• Rank / IC: 1Rx8 single rank, 1Gx8 composition
• Voltage: 1.2V
• Standard: JEDEC — no XMP
• ECC: Non-ECC
• Buffering: Unbuffered
• DRAM: ETT grade, brand-name chips
• Operating Temp: 0°C to 85°C
• RGB: None
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.

Transcend’s DDR5 JetRam line carries forward the defining quality differentiator of the DDR4 JetRam already listed in this range. Compliant with JEDEC international standards, Transcend’s new-gen DDR5 JetRam memory modules are manufactured with true ETT grade, brand-name DRAM chips that have passed Transcend’s strict screening process and rigorous environmental testing. The module ships on a standard green PCB with no heat spreader and no RGB — Transcend’s focus, as with DDR4 JetRam, is on component quality and long-term reliability over aesthetics. PCB height is 1.23 inches, fitting virtually all desktop cases and CPU cooler configurations.

DDR5 Architecture & Dual Subchannel Design

The DDR5 generation introduces a meaningful internal architectural change over DDR4 that directly benefits performance. DDR5 features two independent 32-bit channels that bring speeds to 4,800MT/s. Each DDR5 module effectively presents two independent 32-bit memory channels to the memory controller rather than DDR4’s single 64-bit channel — improving memory access parallelism and burst efficiency. The 1.1V low working voltage and PMIC effectively reduce signal interruption while cutting down power consumption, and on-die ECC automatically spots and corrects data errors, enhancing data integrity and system stability.

Single-Rank (1Rx8) Configuration

The JM4800ALE-16G uses a 1Rx8 single-rank configuration with a (2Gx8)×8 component composition — eight 2Gx8 chips in a single-rank arrangement. This contrasts with the dual-rank (2Rx8) configuration found on the ADATA Value and Premier DDR5-4800 16GB modules in this range. For most everyday workloads the practical performance difference between single-rank and dual-rank at 16GB is negligible; single-rank typically offers slightly better signal integrity in multi-slot populated boards, while dual-rank provides marginally better memory bus interleaving in memory-intensive workloads.

Performance Profile

The JM4800ALE-16G runs at DDR5-4800 (PC5-38400) with CL40 timings at 1.1V via JEDEC specification — no XMP profile, no BIOS configuration required. Operating temperature is 0°C to 85°C. The module will run at rated DDR5-4800 speed on any compatible platform straight out of the box.

No XMP on this module: DDR5-4800 is achieved via JEDEC specification natively — no BIOS tuning required.

DDR5 Platform Requirements

DDR5 is not compatible with DDR4 motherboards or slots. A DDR5-capable motherboard and CPU is required — Intel 12th generation Alder Lake or later on a DDR5-compatible board, or AMD Ryzen 7000 series (AM5) or later.

DDR5 is not compatible with DDR4 slots: Verify that both your motherboard and CPU support DDR5 before purchasing. Many Intel 12th and 13th gen boards were available in both DDR4 and DDR5 variants — confirm your specific board’s memory type before ordering.

Single stick = single channel: For dual-channel bandwidth, install a second JM4800ALE-16G in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR5 | 288-pin U-DIMM (Desktop)
• Speed: 4800MT/s (PC5-38400)
• Timings: CL40
• Rank / IC: 1Rx8 single rank, (2Gx8)×8
• Voltage: 1.1V
• Standard: JEDEC — no XMP
• On-Die ECC: Yes
• PMIC: Yes — on-module power management IC
• Dual Subchannel: Yes — two independent 32-bit channels
• DRAM: ETT grade, brand-name chips
• PCB Height: 1.23 inches
• Operating Temp: 0°C to 85°C
• RGB: None
• ECC: Non-ECC unbuffered
• Platform: Intel 12th gen+ (DDR5 boards) & AMD Ryzen 7000 (AM5)+
• Warranty: Limited Lifetime

Proudly sold by the Ringwood Digital Store.