Wireless standards span IEEE 802.11be (Wi-Fi 7) on both 2.4 GHz and 5 GHz, delivering up to 5760 Mbps at 5 GHz (across band1/band2/band3) and 1376 Mbps at 2.4 GHz — a combined 7.2 Gbps. The headline Wi-Fi 7 additions over Wi-Fi 6 are Multi-Link Operation (MLO), 4K-QAM, Multi-RUs, and wider 320 MHz channels on 6 GHz (where applicable). MLO, Band Steering, Zero-Wait DFS, and EasyMesh are all supported. The 5 GHz radio uses a 4T5R antenna architecture (4 transmitters, 5 receivers) for improved receive sensitivity at longer ranges.

Wi-Fi 7 features require Wi-Fi 7 clients. MLO, 4K-QAM, and Multi-RUs only function with Wi-Fi 7 devices. Older clients connect normally at their supported standard. This is a dual-band device (2.4 GHz + 5 GHz); there is no 6 GHz band.

XGS-PON — Symmetric 10G Fibre

The XGS-PON port conforms to ITU G.9807.1, Class B+, delivering 10 Gbps downstream and 10 Gbps upstream at RX 1577 nm / TX 1270 nm via a DFB laser transmitter and PIN-TIA receiver, over an SC/APC connector at up to 20 km. This is the same XGS-PON standard as the Ubiquiti UISP-FIBER-XGS, but here it’s integrated into a full wireless CPE rather than a standalone ONU — the XGB430V Pro eliminates the need for a separate router entirely.

XGS-PON requires an XGS-PON OLT. This is not a GPON device. Confirm your fibre provider operates XGS-PON infrastructure and will provision a third-party ONT before purchasing.

Ports — 10G, Multi-Gig, VoIP, USB

Interfaces are: 1× SC/APC XGS-PON port, 1× 10G WAN/LAN port (configurable), 4× 10/100/1000 Mbps Gigabit LAN ports, 2× FXS VoIP ports, and 1× USB 3.0 port. The dual FXS ports are a meaningful step up from the single FXS on the XX230V — relevant for small businesses or homes with two active analogue lines. The USB 3.0 port supports file sharing via Samba/FTP and can serve as a 3G/4G dongle fallback WAN connection.

Routing, Security, and IPTV

Software features include SPI Firewall, DDoS protection, IP-MAC binding, Access Control, NAT with ALG/Virtual Server/Port Triggering/DMZ/UPnP, Static Routing, RIP, PPPoE/Dynamic/Static IP WAN modes, DHCP server/client, DDNS (NO-IP, DynDNS), IGMP v2/v3 Snooping/Proxy for IPTV, WMM QoS, Wi-Fi scheduling, and parental controls. Up to 3 SSIDs per band (6 total) with WPA/WPA2/WPA3-PSK.

Management

Management covers local web UI, remote management, TR-069 (TR-098/TR-143), IPv4 and IPv6, and the Aginet app for end users. ISPs can manage and provision remotely via ACS (TR-069) or OMCI. Onboard resources are 256 MB flash and 512 MB RAM.

Key Highlights

• PON standard: XGS-PON (ITU G.9807.1, Class B+) — not GPON
• PON port: 1× SC/APC | RX 1577 nm / TX 1270 nm | Max reach: 20 km
• XGS-PON speeds: 10 Gbps downstream / 10 Gbps upstream (symmetric)
• 10G WAN/LAN port: 1× (configurable WAN or LAN)
• LAN ports: 4× Gigabit Ethernet RJ45
• VoIP: 2× RJ11 FXS ports
• USB: 1× USB 3.0 (file sharing, 3G/4G dongle backup)
• Wi-Fi standard: Wi-Fi 7 (802.11be) dual-band | BE7200
• Wi-Fi speeds: 5760 Mbps (5 GHz) + 1376 Mbps (2.4 GHz) = 7.2 Gbps combined
• Wi-Fi features: MLO, OFDMA, MU-MIMO, 4K-QAM, Zero-Wait DFS, Band Steering, Beamforming, EasyMesh
• Wi-Fi security: WPA/WPA2/WPA3-PSK | Up to 3 SSIDs per band
• Memory: 512 MB RAM | 256 MB Flash
• Management: Web UI, Aginet app, TR-069 (TR-098/TR-143), OMCI
• IPTV: IGMP v2/v3 Snooping/Proxy
• Dimensions: 189 × 70 × 218 mm | Power: 12V/2.5A
• Operating temp: 0°C to 40°C

Proudly sold by the Ringwood Digital Store.