The Vulcan Z uses a 0.8mm one-piece alloy aluminium heat spreader formed through a punch-press process, giving it a rigid, low-profile build. The electrolytic anodising finish resists corrosion and is non-conductive, while a thermally conductive adhesive layer ensures efficient heat transfer from the ICs to the spreader. At 1.35V operating voltage, it runs cooler than standard DDR4 modules, making it well-suited for compact builds or systems without aggressive airflow.

Performance & Overclocking

Out of the box the module runs at its JEDEC base frequency — typically DDR4-2133 or DDR4-2400 — and achieves its rated DDR4-3200 speed once XMP 2.0 is enabled in the BIOS. Timings are CL16-18-18-38 at 1.35V, landing it squarely in the mainstream performance tier for DDR4. All ICs are individually selected through Team Group’s quality control process for stability and consistency.

XMP required for rated speed: Without enabling XMP 2.0 (Intel) or DOCP/EXPO (AMD) in your motherboard BIOS, this module will default to DDR4-2133 or DDR4-2400. This is normal behaviour, not a defect.

Compatibility

This is a standard 288-pin DIMM compatible with Intel and AMD DDR4 desktop platforms. It fits any motherboard with a DDR4 slot — AM4, LGA1200, LGA1700 (where DDR4 is supported), and similar. As a single 8GB module it can be paired with a second identical stick for dual-channel operation, or used standalone in a single-channel configuration.

Check your motherboard’s QVL: While broadly compatible, final operating frequency depends on your specific motherboard, CPU, and BIOS revision. Confirm DDR4-3200 support before purchasing, particularly on older Intel chipsets.

This is the grey, single-stick (1×8GB) variant — not a dual-channel kit. A BIOS update is recommended before installation to ensure the best compatibility and XMP stability.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM
• Speed: 3200MHz (PC4-25600)
• Timings: CL16-18-18-38
• Voltage: 1.35V
• Overclocking: Intel XMP 2.0 supported
• Colour: Grey
• RGB: None
• Platform: Intel & AMD DDR4 compatible

Proudly sold by the Ringwood Digital Store.

The Spectrix D60G is built around one of the most distinctive visual designs in the desktop memory market. The fully exposed RGB light strips are extra-wide for maximum effect, combined with a mesmerising multi-coloured flow effect to outshine the competition — covering 9,497mm² of surface area, equating to over 60% of the module’s total surface. The diamond-cut, multi-faceted aluminium heat spreader in tungsten grey gives the module an avant-garde, premium aesthetic that stands out in windowed builds. RGB effects are fully programmable via the XPG RGB Sync app, and the lighting is compatible with existing RGB control software from major motherboard makers including ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & XMP 2.0

This module ships with Intel XMP 2.0 profiles for easy, one-click overclocking from BIOS. The AX4U32008G16A-ST60 runs at DDR4-3200 with CL16-20-20 timings when XMP is enabled — a compatibility-optimised profile designed to achieve rated performance reliably across a wide range of Intel and AMD motherboards. Operating voltage at XMP is 1.35V. Without XMP enabled, the module defaults to DDR4-2666 at JEDEC base spec — XMP must be activated in BIOS to reach advertised speed.

XMP must be enabled for rated speed: This module defaults to DDR4-2666 at JEDEC. Enable XMP 2.0 in your motherboard BIOS to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Heat Spreader & Thermals

The D60G is built with high-quality chips and a metal heat sink for excellent signal integrity, reliability, and stability, which effectively extends the lifespan of the memory module. At 45.93mm in height the heat spreader adds meaningful thermal headroom, though buyers with large tower CPU coolers should verify clearance — particularly in tight mid-tower builds with top-mounted RAM slots near the cooler’s heatsink stack.

Check CPU cooler clearance: At approximately 46mm tall, the D60G is taller than standard heatspreadless modules. Confirm your CPU cooler’s RAM clearance specification before purchasing, especially with large tower coolers.

Compatibility

The Spectrix D60G is tested to work with both AMD and Intel motherboards, compatible across AM4 (Ryzen), LGA1200 (10th/11th gen Intel), and LGA1700 (12th/13th gen Intel where DDR4 is supported). As a single 8GB stick it operates in single-channel mode; pair it with a second unit in the recommended dual-channel slots for maximum memory bandwidth. Two sticks also doubles the RGB presence in your build.

Single stick = single channel: For dual-channel bandwidth and a symmetrical RGB look, add a second matching AX4U32008G16A-ST60 and install both in your motherboard’s recommended dual-channel slots.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); CL22 JEDEC default
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Default speed: DDR4-2666 without XMP
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — dual RGB light strip, programmable
• Heat Spreader: Aluminium tungsten grey, diamond-cut
• RGB Software: XPG RGB Sync; ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome compatible
• Colour: Tungsten Grey
• Dimensions: 133.35 × 45.93 × 8.4mm

Proudly sold by the Ringwood Digital Store.

The XPG Spectrix D50 features a simplistic and clean design with a sharp angular geometric theme, including a triangle-shaped RGB light diffuser. The heat sink is composed of thick aluminium with deep grooves on each side, adding to its style and increasing surface area for better cooling. At 1.95mm thick, the metal heat spreader offers excellent durability and projects an air of strength and high performance — substantially more robust than the thin stamped spreaders common on mid-tier RGB modules. The tungsten grey colourway is understated and build-neutral, complementing both dark and light themed systems.

RGB Lighting

The D50 features a clean and elegant exterior with simple geometric lines and a triangular RGB panel that fits in perfectly with the module’s overall design. Using the XPG RGB Sync app or compatible motherboard RGB software, users can switch between four RGB modes — Static, Breathing, Comet, and Music — giving solid personalisation options without overwhelming the build’s aesthetic. The D50’s RGB approach is intentionally more restrained than the D60G’s full-strip design, producing a softer, more focused glow. RGB sync support covers ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & XMP 2.0

The D50 runs at a tested speed of 3200MHz with CL16-20-20 timings at 1.35V via Intel XMP 2.0. Without XMP enabled, the module defaults to its JEDEC base frequency — typically DDR4-2666 — and XMP must be activated in BIOS to reach the rated DDR4-3200 speed. Intel XMP 2.0 makes overclocking a snap and enhances system stability, allowing users to apply the rated frequency without manually adjusting individual BIOS parameters.

XMP must be enabled for rated speed: Without activating XMP 2.0 in BIOS, this module will default to JEDEC speed (typically DDR4-2666). Enable XMP on Intel, or DOCP/EXPO on AMD, to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Compatibility & Warranty

ADATA memory modules have been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance, in addition to full Intel platform support. The module is compatible across AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it runs in single-channel mode by default; installing a second matching module in the recommended dual-channel slots unlocks full dual-channel bandwidth and pairs the RGB for a symmetrical look.

Check CPU cooler clearance: The 1.95mm aluminium heat spreader adds height to the module. Verify your CPU cooler’s RAM slot clearance before purchasing, particularly with large tower air coolers.

Single stick = single channel: Pair with a second AX4U320038G16A-ST50 in the recommended dual-channel slots for maximum bandwidth and a matched RGB look.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — triangular RGB light bar, 4 modes (Static, Breathing, Comet, Music)
• Heat Spreader: 1.95mm aluminium, tungsten grey
• RGB Software: XPG RGB Sync; ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome compatible
• Colour: Tungsten Grey
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Gammix D35 takes a deliberately understated approach to gaming memory aesthetics. The D35 features a compact low-profile heatsink with a distinctive triangular outline, designed for gamers with unique personalities who prefer their build’s components to speak through performance rather than light shows. The all-black heat spreader is slim enough to clear the majority of large tower air coolers — a genuine practical advantage over taller RGB modules in popular mid-tower and mATX builds. The D35 is RoHS compliant, meeting environmental standards for responsible component manufacturing.

Performance & XMP 2.0

The AX4U32008G16A-SBKD35 is tested at 3200MT/s with CL16-20-20 latency timings at 1.35V. Intel XMP 2.0 is supported for one-click BIOS overclocking to the rated speed — without XMP enabled the module defaults to its JEDEC base speed (typically DDR4-2666). CL16 primary latency at DDR4-3200 puts the D35 firmly in the enthusiast performance bracket, well above the CL22 of standard JEDEC value modules at the same frequency.

XMP must be enabled for rated speed: Without activating XMP 2.0 in BIOS (or DOCP/EXPO on AMD), this module defaults to JEDEC speed — typically DDR4-2666. Enable XMP to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Quality & Compatibility

The Gammix D35 has undergone strict selection and screening procedures, passing reliability and compatibility tests, to deliver a strong and durable product that epitomises the highest quality. The D35 is compatible with the latest AMD platforms and supports Intel XMP 2.0 overclocking, covering AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it runs in single-channel mode by default; pair it with a second matching module in the recommended dual-channel slots for full bandwidth.

Single stick = single channel: For dual-channel bandwidth, add a second AX4U32008G16A-SBKD35 and install both in your motherboard’s recommended paired slots. Consult your board’s manual for the correct configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: None
• Heatsink: Low-profile triangular aluminium, black
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Standards: RoHS compliant
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Vulcan Z’s signature heat spreader design carries over in bold red on this variant. The heat spreader is formed by a punch press process with a 0.8mm thick, one-piece alloy aluminium construction to reinforce the body structure. The electrolytic anodising process enhances corrosion resistance and makes it non-conductive, while superconductive thermal adhesive maintains gaming memory within operating temperatures. The red anodised finish is vivid and build-neutral — it pops in windowed cases without requiring RGB sync software or any configuration.

Performance & XMP 2.0

Timings are CL16-18-18-38 at DDR4-3200MHz — primary CL16 latency puts this firmly in the enthusiast performance tier, significantly tighter than the CL22 JEDEC modules elsewhere in this range. XMP Profile 2.0 is supported for one-click overclocking on both AMD and Intel CPUs, with the module operating at 1.35V. Without XMP enabled the module defaults to its JEDEC base speed.

XMP must be enabled for rated speed: If XMP 2.0 is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR4-2133/2400 or lower. This is normal behaviour and not a product defect. It is recommended to update your motherboard BIOS before installing to ensure optimal compatibility and performance.

IC Quality & Compatibility

Every IC chip is selected through a rigorous testing process, ensuring the best performance and stability for overclocking and gaming, and the module is fully optimised to be compatible with the latest DDR4 Intel and AMD platforms. Platform compatibility covers Intel Core 6th through 11th generation and AMD Ryzen 1000, 2000, 3000, and 5000 series desktop CPUs. As a single 16GB stick the module runs in single-channel mode by default; pairing with a second matching unit enables 32GB dual-channel.

Single stick = single channel: For dual-channel bandwidth, add a second module and install both in your motherboard’s recommended paired DIMM slots. Check your board’s manual for the correct configuration.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-18-18-38
• Voltage: 1.35V (XMP) / 1.2V (JEDEC default)
• Overclocking: Intel XMP 2.0 supported
• RGB: None
• Heat Spreader: 0.8mm one-piece anodised aluminium, red
• Colour: Red
• Platform: Intel Core 6th–11th Gen & AMD Ryzen 1000–5000 series compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Delta RGB is Team Group’s most visually striking DDR4 memory line, and the design language is unmistakable. The hollow “R” on the heat spreader represents Revolution — built with a lighter and thinner metal material, the stereoscopic design matches with the ultra-wide-angle luminous area for a distinctive look. The full-frame 120° ultra-wide-angle illumination at the top emits colourful bright light with the built-in Force Flow RGB lighting effect, with colours changing smoothly to provide an unparalleled visual experience day or night.

RGB sync is compatible across all major motherboard ecosystems: ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome Sync, and BIOSTAR Advanced VIVID LED DJ are all supported, alongside Team Group’s own T-Force BLITZ control software.

Performance & XMP 2.0

Timings are CL16-18-18-38 at DDR4-3200MHz with an operating voltage of 1.35V, with Intel XMP 2.0 supported for one-click overclocking. Without XMP enabled the module defaults to its JEDEC base speed — XMP must be activated in BIOS to achieve the rated DDR4-3200 at CL16.

XMP must be enabled for rated speed: If XMP 2.0 is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR4-2133/2400 or lower. This is a normal phenomenon and not a product defect. It is recommended to update your motherboard BIOS before installing to ensure optimal compatibility and performance.

Heat Spreader & Build Quality

The aluminium alloy heat spreader uses an asymmetrical minimalist design that keeps the module’s profile relatively slim while providing effective thermal dissipation for sustained CL16 operation. The working voltage of 1.2–1.4V ensures energy-efficient operation that reduces temperature and heat generated, offering stable long-term performance.

Compatibility

Multiple compatibility verifications with mainstream DDR4 motherboards ensure stability across all boards on the QVL (Qualified Vendor List), covering both Intel and AMD platforms. As a single 16GB stick it runs in single-channel mode by default; pairing with a second unit in the recommended dual-channel slots enables 32GB dual-channel and doubles the RGB presence.

Single stick = single channel: For dual-channel bandwidth and a symmetrical RGB pairing, install a second module in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct configuration.

Check CPU cooler clearance: The Delta RGB heat spreader adds height to the module. Verify your CPU cooler’s RAM clearance before purchasing, particularly with large tower air coolers.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-18-18-38
• Voltage: 1.35V (XMP) / 1.2V (JEDEC default)
• Overclocking: Intel XMP 2.0 supported
• RGB: Yes — Force Flow effect, 120° ultra-wide-angle full-frame illumination
• Heat Spreader: Aluminium alloy, asymmetric design with hollow “R” motif
• Colour: White
• RGB Software: T-Force BLITZ; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync, BIOSTAR VIVID LED DJ compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Predator DDR4 RGB is one of the most recognisable gaming memory modules ever produced, and the HX432C16PB3A/8 carries that pedigree in full. The dense black aluminium heat spreader and matching black PCB keep your rig running and looking cool, with smooth, stunning RGB lighting effects bringing your battlestation to life.

The standout feature is HyperX’s patented Infrared Sync technology: Infrared Sync allows you to keep RGB effects synchronised across modules without the need for additional cables — the modules communicate via infrared at up to 18mm working distance, enabling seamless lighting waves across sticks in a multi-module build. The factory preset RGB wave lighting effect is active out of the box, with full customisation available via HyperX NGenuity software and compatibility with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome Sync.

Performance & Dual XMP Profiles

XMP Profile #1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile #2 provides a fallback at DDR4-3000 with CL15-17-17 at 1.35V — a secondary profile that ensures rated overclocking performance on platforms that may not fully support DDR4-3200 from XMP Profile 1. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 in your motherboard BIOS (Profile 1 for DDR4-3200 CL16, Profile 2 for DDR4-3000 CL15 as a fallback). Updating your BIOS before installation is recommended for best compatibility.

Build Quality & IC Topology

The HX432C16PB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers and a module height of 42.20mm (1.661″). The 1Rx8 configuration delivers excellent signal integrity for both single and multi-stick configurations. Predator DDR4 RGB is Intel XMP certified with profiles optimised for Intel’s latest chipsets.

Check CPU cooler clearance: At 42.20mm tall, the Predator’s heat spreader is taller than standard heatspreadless modules. Verify your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Compatibility & Warranty

The Intel XMP-ready and certified profiles are optimised for Intel’s latest chipsets and are compatible with many of AMD’s latest chipsets — just select the profile and you’re ready to go. The module is 100% factory tested and backed by a lifetime warranty. As a single 8GB stick it operates in single-channel mode; pairing with a second HX432C16PB3A/8 enables dual-channel and, critically, unlocks the full effect of HyperX’s Infrared Sync for seamless cross-module RGB waves.

Single stick = single channel: For dual-channel bandwidth and synchronised Infrared Sync RGB lighting across both modules, pair with a second HX432C16PB3A/8 in your motherboard’s recommended dual-channel slots.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP Profile 1); CL15-17-17 @ 1.35V (XMP Profile 2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two hand-tuned profiles
• RGB: Yes — factory preset wave effect; HyperX Infrared Sync (cable-free)
• Heat Spreader: Dense black aluminium; matching black PCB
• Height: 42.20mm (1.661″)
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync compatible
• Colour: Black
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The HX432C16FB3/8 stands at just 34.1mm (1.3425″) with its heatsink fitted — making it one of the most cooler-friendly CL16 gaming memory modules available. Where the HyperX Predator RGB reaches 42.2mm, the Fury comes in more than 8mm shorter, comfortably clearing the RAM overhang zones of almost all large tower CPU coolers. The revised black aluminium heat spreader gives it a clean, premium look without contributing unnecessary height or weight to the build.

Plug N Play Auto-Overclocking

A standout feature that sets HyperX FURY apart from other DDR4-3200 modules is its Plug N Play auto-overclocking capability. FURY DDR4 features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds, providing a performance boost without requiring any manual BIOS configuration on compatible platforms. On Intel systems that support XMP, enabling XMP Profile 1 in BIOS takes the module to its full DDR4-3200 CL16 rated speed — and on platforms with Plug N Play support, the system handles intermediate speed optimisation automatically.

Dual XMP Profiles & Performance

XMP Profile 1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 with CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. The inclusion of two hand-tuned profiles means the Fury can deliver rated CL16 performance on capable systems while still offering a reliable secondary profile for platforms that struggle with DDR4-3200 from XMP Profile 1.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your motherboard BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best results.

AMD note: AMD Ryzen systems will boot at the JEDEC default speed and latency with FURY. To enable the factory overclock speed and latency, XMP Profile 1 must be selected manually in the BIOS.

IC Quality & Build

The module is a 1Rx8 single-rank design built on eight 1G×8-bit FBGA components with gold contact fingers and a 288-pin form factor. Depending on batch, the HX432C16FB3/8 uses Samsung B-die or Micron Rev.E ICs — both widely supported across mainstream Intel and AMD chipsets. Kingston backs this with 100% factory testing at rated speeds and a lifetime warranty.

Compatibility

The Fury is compatible across mainstream Intel (Core 6th generation onwards) and AMD Ryzen DDR4 platforms, covering AM4, LGA1200, and LGA1700 (where DDR4 is supported). As a single 8GB stick it runs in single-channel mode by default; pairing with a second matching module in the recommended dual-channel slots delivers 16GB dual-channel and maximum memory bandwidth.

Single stick = single channel: For dual-channel bandwidth, add a second HX432C16FB3/8 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: None
• Heat Spreader: Low-profile black aluminium — 34.1mm height
• Contact fingers: Gold
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime
• Part Number: HX432C16FB3/8

Proudly sold by the Ringwood Digital Store.

The Fury RGB takes the Fury’s proven platform and adds a full-length illuminated RGB diffuser strip along the top of the module. Unlike the Predator RGB’s cable-free Infrared Sync, the Fury RGB relies on software sync via motherboard RGB ecosystems — making it compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, and ASRock Polychrome Sync, as well as HyperX’s own NGenuity software for standalone lighting customisation. The black aluminium heat spreader and black PCB carry over from the non-RGB Fury, with the illuminated diffuser sitting above the spreader for a clean, layered aesthetic.

The addition of the RGB diffuser increases module height to 41.24mm — up from the non-RGB Fury’s 34.1mm — which is comparable to other RGB gaming modules and still narrower than the Predator RGB’s 42.2mm. Most large tower air coolers will clear this height, but it’s worth verifying before purchasing.

Check CPU cooler clearance: At 41.24mm tall, the Fury RGB is taller than the non-RGB Fury (34.1mm). Confirm your CPU cooler’s RAM clearance specification before purchasing, particularly with large tower air coolers.

Performance & Dual XMP Profiles

The Fury RGB shares its full performance specification with the non-RGB Fury. XMP Profile 1 runs at DDR4-3200 with CL16-18-18 timings at 1.35V. XMP Profile 2 provides a compatibility fallback at DDR4-3000 with CL15-17-17 at 1.35V. Without XMP enabled, the SPD defaults to JEDEC DDR4-2400 at 17-17-17 at 1.2V. Plug N Play auto-overclocking at 2400MHz and 2666MHz is also supported on compatible platforms, making initial setup straightforward even before XMP is manually enabled.

XMP must be enabled for rated speed: This module defaults to DDR4-2400 at JEDEC. Enable XMP 2.0 Profile 1 in your motherboard BIOS to unlock DDR4-3200 at CL16-18-18. Profile 2 (DDR4-3000 CL15) is available as a fallback. Updating your BIOS before installation is recommended for best results.

AMD note: On AMD Ryzen platforms, the module will boot at JEDEC default speed. XMP Profile 1 must be manually selected in BIOS to enable the rated DDR4-3200 frequency and CL16 timings.

IC Quality & Build

The HX432C16FB3A/8 is a 1Rx8 single-rank module built on eight 1G×8-bit FBGA components with gold contact fingers on a 288-pin form factor. Kingston backs all HyperX Fury memory with 100% factory testing at rated speeds and a lifetime warranty. Depending on production batch, ICs are typically Samsung B-die or Micron Rev.E — both of which have excellent compatibility track records across mainstream DDR4 platforms.

Positioning vs Fury & Predator RGB

The Fury RGB sits between the non-RGB Fury and the Predator RGB in Kingston’s HyperX DDR4 lineup. It matches the Predator RGB’s CL16 XMP performance profile but trades the Predator’s Infrared Sync cable-free multi-module synchronisation for a more accessible price point. The non-RGB Fury offers the same performance in a lower-profile (34.1mm) package for cooler-clearance-constrained builds. If RGB sync across multiple sticks is a priority and budget allows, the Predator RGB’s Infrared Sync is the more elegant solution; for a single RGB stick or a budget-conscious RGB build, the Fury RGB delivers full value.

Single stick = single channel: For dual-channel bandwidth and matched RGB lighting across both slots, add a second HX432C16FB3A/8 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct slot configuration.

Key Highlights

• Capacity: 8GB (1×8GB)
• Type: DDR4 | 288-pin DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0 Profile 1
• Timings: CL16-18-18 @ 1.35V (XMP P1); CL15-17-17 @ 1.35V (XMP P2); CL17-17-17 @ 1.2V (JEDEC DDR4-2400)
• Rank / IC: 1Rx8 single rank, 8× FBGA components
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 — two profiles; Plug N Play auto-OC at 2400/2666MHz
• RGB: Yes — full-length illuminated diffuser strip; software sync
• Heat Spreader: Black aluminium with RGB diffuser — 41.24mm height
• Contact fingers: Gold
• RGB Software: HyperX NGenuity; ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0, ASRock Polychrome Sync compatible
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.

The Gammix D35 design carries over identically from the 8GB variant — and that’s the point. The Gammix D35 boasts a low-profile heatsink that fits perfectly in smaller PC cases and avoids interfering with tower CPU coolers, making it one of the few CL16 XMP gaming modules that can be safely installed alongside large tower air coolers without measuring clearance obsessively. The compact triangular outline is specifically designed for gamers with unique personalities who want a clean, distinctive aesthetic without RGB. The all-black anodised aluminium heat spreader keeps thermals in check during sustained XMP operation.

Performance & XMP 2.0

The AX4U320016G16A-SBKD35 runs at a tested speed of 3200MT/s with CL16-20-20 tested latency at 1.35V, with Intel XMP 2.0 supported for one-click BIOS overclocking to the rated speed. Without XMP enabled the module defaults to JEDEC base speed — XMP must be activated in BIOS to unlock DDR4-3200 at CL16.

XMP must be enabled for rated speed: Without activating XMP 2.0 in BIOS (or DOCP/EXPO on AMD), this module defaults to JEDEC speed — typically DDR4-2666 or lower. Enable XMP to unlock DDR4-3200 at CL16-20-20. This is normal behaviour, not a defect.

Quality & Compatibility

The GAMMIX D35 has undergone strict selection and screening procedures, passing reliability and compatibility tests, and uses only the highest quality IC chips and PCBs for higher overclocking performance and reliability. ADATA memory has been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance, covering AM4 (Ryzen), LGA1200, and LGA1700 (where DDR4 is supported). The module is RoHS compliant.

Single stick = single channel: For dual-channel bandwidth, add a second AX4U320016G16A-SBKD35 in your motherboard’s recommended paired DIMM slots. Refer to your board’s manual for the correct configuration.

Check CPU cooler clearance: While the D35’s low-profile heat spreader is designed to clear most tower coolers, always verify your specific cooler’s RAM clearance specification before purchasing.

Key Highlights

• Capacity: 16GB (1×16GB)
• Type: DDR4 | 288-pin U-DIMM (Desktop)
• Speed: 3200MHz (PC4-25600) via XMP 2.0
• Timings: CL16-20-20 (XMP); JEDEC default at DDR4-2666
• Voltage: 1.35V (XMP) / 1.2V (JEDEC)
• Overclocking: Intel XMP 2.0 supported
• RGB: None
• Heatsink: Low-profile triangular aluminium, black
• Colour: Black
• Platform: Intel & AMD DDR4 compatible
• Standards: RoHS compliant
• Warranty: Lifetime

Proudly sold by the Ringwood Digital Store.